Numerical Models Validation of Cracked Square Hollow Section (SHS) - and -Joints
Publication: Journal of Structural Engineering
Volume 137, Issue 10
Abstract
To validate the accuracy of finite-element models of cracked square hollow section (SHS) - and -joints, two full-scale precracked specimens were tested under static incremental loads up to failure. The load-displacement curves were plotted during the tests, and a set of linear variable displacement transducers (LVDTs) were used to record the crack mouth opening displacements (CMOD) at the deepest points, whereas the crack extension was captured using the standard Alternating Current Potential Drop (ACPD) technique. The experimental results are compared with the corresponding numerical results obtained using the nonlinear finite-element method. Both sets of results show good agreement with maximum percentage differences of 7.15 and 7.96% for the plastic collapse loads and crack mouth opening displacements, respectively. Hence, the numerical model adopted previously for the cracked SHS -joints is robust and can also be used to estimate the plastic collapse load and crack driving force of any uniplanar tubular cracked - and -joints.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to thank the Maritime Research Centre in the School of Civil and Environmental Engineering at the Nanyang Technological University, Singapore, and the Maritime Port Authority of Singapore for kindly funding this ongoing research project.
References
ABAQUS. (2006). Standard user’s manual, version 6.5, Hibbett, Karlsson & Sorensen, Inc., Providence, RI.
American Welding Society (AWS). (2006). “Structural welding code—Steel.” AWS D1.1/D1.1M: 2006, Miami.
American Society of Mechanical Engineers (ASME). (1998). “Rules for construction of pressure vessels.” ASME VIII, Division 2, New York.
American Society of Mechanical Engineers (ASME). (2007). “Fitness-for-service.” API 579-1/ASME FFS-1, New York.
British Energy. (2001). Assessment of the integrity of structures containing defects, Revision 4, Gloucester, UK.
British Standards Institution (BSI). (2005). “Guide to methods for assessing the acceptability of flaws in metallic structures.” BS7910-Amendment 1, London.
British Standards Institution (BSI). (2006). “Hot finished structural hollow sections of non-alloy and fine grain structural steels, part 2: Tolerances, dimensions and sectional properties.” BS EN 10210-2, London.
Burdekin, F. M. (2001). “The static strength of cracked joints in tubular members.” Offshore Technology Rep. OTO-2001/080, Health and Safety Executive, London.
Burdekin, F. M., and Cowling, M. J. (1998). “Defect assessment in offshore structures—A procedure.” Publication 100/98, Centre for Marine and Petroleum Technology (CMPT), Marine Technology Directorate Ltd., and Health and Safety Executive, London.
Burdekin, F. M., and Yang, G. J. (1997). “Failure assessment diagrams for mixed mode loading and cracked tubular joints.” Advances in Fracture Research, Proc. 9th Int. Conf. on Fracture (ICF9), Vol. I, Elsevier Science Ltd., Amsterdam, Netherlands, 27–37.
Cheaitani, M. J., and Burdekin, F. M. (1994). “Ultimate strength of cracked tubular joints.” Tubular Structures VI, Proc. 6th Int. Symp. on Tubular Structures, P. Grundy, A. Holgate, and B. B. Wong, eds., Balkema, Rotterdam, Netherlands, 607–616.
Department of Energy (DOE). (1995). Offshore installations: Guidance on design, construction and certification, 4th Ed., 3rd Amendment, Health and Safety Executive, London.
Dover, W. D., Dharmavasan, S., Brennan, F. P., and Marsh, K. J. (1995). Fatigue crack growth in offshore structures, Engineering Materials Advisory Service Ltd., Chameleon Press, London.
Dover, W. D., and Monahan, C. C. (1994). “The measurement of surface breaking cracks by the electrical systems ACPD/ACFM.” Fatigue Fract. Eng. Mater. Struct., 17(12), 1485–1492.
Hadley, I., Dyer, A. P., Booth, G. S., Cheaitani, M. J., Burdekin, F. M., and Yang, G. J. (1998). “Static strength of cracked tubular joints: New data and models.” Proc. 17th Int. Conf. on Offshore Mechanics and Arctic Engineering, American Society of Mechanical Engineers, New York, Paper 2352.
Lie, S. T., Chiew, S. P., Lee, C. K., and Yang, Z. M. (2006a). “Static strength of cracked square hollow section T joints under axial loads. I: Experimental.” J. Struct. Eng., 132(3), 368–377.
Lie, S. T., Chiew, S. P., Xiang, Z. H., and Cen, Z. (2001). “Fatigue crack shapes development of plate-to-plate welded joints.” Exp. Mech., 41(1), 114–121.
Lie, S. T., Lee, C. K., Chiew, S. P., and Yang, Z. M. (2005). “The ultimate behaviour of cracked square hollow section -joints.” 4th Int. Conf. on Advances in Steel Structures—ICASS 2005, Multi-Science Publishing, Essex, UK, 1099–1106.
Lie, S. T., Lee, C. K., Chiew, S. P., and Yang, Z. M. (2006b). “Static strength of cracked square hollow section T joints under axial loads. II: Numerical.” J. Struct. Eng., 132(3), 378–386.
Lie, S. T., Yang, Z. M., and Gho, W. M. (2009). “Validation of BS7910: 2005 failure assessment diagram for cracked square hollow section -, - and -joints.” Int. J. Pressure Vessels Piping, 86(5), 335–344.
Lugg, M. C. (1989). “Data interpretation in ACPD crack inspection.” NDT Int., 22(3), 149–154.
Milne, I., Ainsworth, R. A., Dowling, A. R., and Stewart, A. T. (1986). “Assessment of the integrity of structures containing defects.” CEGB Rep. No. R/H/R6–Revision 3 (unrestricted), Central Electricity Generating Board, Berkeley Nuclear Laboratories, Gloucester, UK.
Milne, I., Ainsworth, R. A., Dowling, A. R., and Stewart, A. T. (1988). “Assessment of the integrity of structures containing defects.” Int. J. Pressure Vessels Piping, 32(1–4), 3–104.
Saguy, H., and Rittel, D. (2007). “Flaw detection in metals by the ACPD technique: Theory and experiments.” NDT& E Int., 40(7), 505–509.
Van Wingerde, A. M., Packer, J. A., and Wardenier, J. (1997). “SCF formulae for fatigue design of -connections between square hollow sections.” J. Constr. Steel Res., 43(1–3), 87–118.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Jan 5, 2010
Accepted: Nov 12, 2010
Published online: Nov 16, 2010
Published in print: Oct 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.