Optimal Topological Design of Periodic Structures for Natural Frequencies
Publication: Journal of Structural Engineering
Volume 137, Issue 10
Abstract
This paper proposes a method for topology optimization of periodic structures on dynamic problems by using an improved bidirectional evolutionary structural optimization (BESO) technique. Frequency optimization and frequency-stiffness optimization are formulated for periodic continuum structures at the macroscopic level under arbitrary loadings and boundaries. Numerical instabilities that occur in common topological frequency optimization are dealt with by eliminating singular and single-hinged elements and removing alternative element groups in case of sudden drops of the relevant frequency. Layout periodicity of the optimal design is guaranteed by creating a representative unit cell (RUC) on the basis of a user-defined cell mode and averaging the sensitivities from all unit cells into the RUC. The capability and effectiveness of the proposed approach are demonstrated by numerical experiments with various cell modes.
Get full access to this article
View all available purchase options and get full access to this article.
References
Babuska, I. (1976a). “Solution of interface problems by homogenization I.” SIAM J. Math. Anal., 7(5), 603–634.
Babuska, I. (1976b). “Solution of interface problems by homogenization II.” SIAM J. Math. Anal., 7(5), 635–645.
Babuska, I. (1977). “Solution of interface problems by homogenization III.” SIAM J. Math. Anal., 8(6), 923–937.
Bendsøe, M. P. (1989). “Optimal shape design as a material distribution problem.” Struct. Optim., 1(4), 193–202.
Bendsøe, M. P., and Kikuchi, N. (1988). “Generating optimal topologies in structural design using a homogenization method.” Comput. Methods Appl. Mech. Eng., 71(2), 197–224.
Bendsøe, M. P., and Sigmund, O. (2003). Topology optimization: Theory, methods and applications, Springer, Berlin.
Chu, D. N., Xie, Y. M., Hira, A., and Steven, G. P. (1996). “Evolutionary structural optimization for problems with stiffness constraints.” Finite Elem. Anal. Des., 21(4), 239–251.
Du, J., and Olhoff, N. (2007). “Topological design of freely vibrating continuum structures for maximum values of simple and multiple eigenfrequencies and frequency gaps.” Struct. Multidiscip. Optim., 34(2), 91–110.
Guest, J. K., and Prévost, J. H. (2007). “Design of maximum permeability material structures.” Comput. Methods Appl. Mech. Eng., 196(4–6), 1006–1017.
Guest, J. K., Prévost, J. H., and Belytschko, T. (2004). “Achieving minimum length scale in topology optimization using nodal design variables and projection functions.” Int. J. Numer. Methods Eng., 61(2), 238–254.
Hassani, B., and Hinton, E. (1999). Homogenization and structural topology optimization: Theory, practice and software, Springer-Verlag, Berlin.
Huang, X., and Xie, Y. M. (2007). “Convergent and mesh-independent solutions for the bi-directional evolutionary structural optimization method.” Finite Elem. Anal. Des., 43(14), 1039–1049.
Huang, X., and Xie, Y. M. (2008). “Optimal design of periodic structures using evolutionary topology optimization.” Struct. Multidiscip. Optim., 36(6), 597–606.
Huang, X., and Xie, Y. M. (2009). “Bi-directional evolutionary topology optimization of continuum structures with one or multiple materials.” Comput. Mech., 43(3), 393–401.
Kim, H. J., and Swan, C. C. (2003). “Algorithms for automated meshing and unit cell analysis of periodic composites with hierarchical tri-quadratic tetrahedral elements.” Int. J. Numer. Methods Eng., 58(11), 1683–1711.
Kosaka, I., and Swan, C. C. (1999). “A symmetry reduction method for continuum structural topology optimization.” Comput. Struct., 70(1), 47–61.
Ma, Z., Cheng, H. C., and Kikuchi, N. (1995). “Topological design for vibrating structures.” Comput. Methods Appl. Mech. Eng., 121(1–4), 259–280.
Moses, E., Fuchs, M. B., and Ryvkin, M. (2003). “Topological design of modular structures under arbitrary loading.” Struct. Multidiscip. Optim., 24(6), 407–417.
Neves, M. M., Sigmund, O., and Bendsøe, M. P. (2002). “Topology optimization of periodic microstructures with a penalization of highly localized buckling modes.” Int. J. Numer. Methods Eng., 54(6), 809–834.
Pedersen, N. L. (2000). “Maximization of eigenvalues using topology optimization.” Struct. Multidiscip. Optim., 20(1), 2–11.
Prager, W., and Rozvany, G. I. N. (1977). “Optimization of structural geometry.” Dynamical systems, Academic Press, New York, 265–293.
Querin, O. M., Steven, G. P., and Xie, Y. M. (1998). “Evolutionary structural optimization (ESO) using a bi-directional algorithm.” Eng. Comput., 15(8), 1031–1048.
Rozvany, G. I. N., Zhou, M., and Birker, T. (1992). “Generalized shape optimization without homogenization.” Struct. Optim., 4(3–4), 250–254.
Seyranian, A., Lund, E., and Olhoff, N. (1994). “Multiple eigenvalues in structural optimization problems.” Struct. Optim., 8(4), 207–227.
Sigmund, O. (1994). “Materials with prescribed constitutive parameters: An inverse homogenization problem.” Int. J. Solids Struct., 31(17), 2313–2329.
Sigmund, O., and Torquato, S. (1997). “Design of materials with extreme thermal expansion using a three-phase topology optimization method.” J. Mech. Phys. Solids, 45(6), 1037–1067.
Svanberg, K., and Werme, M. (2006). “Topology optimization by a neighbourhood search method based on efficient sensitivity calculations.” Int. J. Numer. Methods Eng., 67(12), 1670–1699.
Tenek, L. H., and Hagiwara, I. (1994). “Eigenfrequency maximization of plates by optimization of topology using homogenization and mathematical programming.” JSME Int. J., Series C, 37(4), 667–677.
Xie, Y. M., and Steven, G. P. (1993). “A simple evolutionary procedure for structural optimization.” Comput. Struct., 49(5), 885–896.
Yang, X. Y., Xie, Y. M., Steven, G. P., and Querin, O. M. (1999). “Topology optimization for frequencies using an evolutionary method.” J. Struct. Eng., 125(12), 1432–1438.
Zhang, W., and Sun, S. (2006). “Scale-related topology optimization of cellular materials and structures.” Int. J. Numer. Methods Eng., 68(9), 993–1011.
Zhao, C., Steven, G. P., and Xie, Y. M. (1997). “Evolutionary natural frequency optimization of two-dimensional structures with additional non-structural lumped masses.” Eng. Comput., 14(2), 233–251.
Zhou, S., and Li, Q. (2008). “Design of graded two-phase microstructures for tailored elasticity gradients.” J. Mater. Sci., 43(15), 5157–5167.
Zhu, J. H., Zhang, W. H., and Qiu, K. P. (2007). “Bi-directional evolutionary topology optimization using element replaceable method.” Comput. Mech., 40(1), 97–109.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Jan 19, 2009
Accepted: Nov 12, 2010
Published online: Sep 15, 2011
Published in print: Oct 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.