Cellular Finite Beam Element for Nonlinear Analysis of Concrete Structures under Fire
Publication: Journal of Structural Engineering
Volume 137, Issue 5
Abstract
A novel approach to nonlinear finite-element analysis of concrete structures exposed to fire is presented. The proposed formulation refers to frame systems, but it can be extended to other types of structures. The main novelty of this formulation is the use of a special class of evolutionary algorithms, known as cellular automata, to describe the heat transfer process induced by fire and to create an effective link between the simulation of the thermal process and the structural analysis. The heat transfer process is reproduced by considering heat conduction, heat convection, and thermal radiation. The temperature effects on the structural performance are taken into account by means of temperature-dependent thermal and mechanical properties of concrete and steel. In this way, the general criteria for nonlinear finite-element analysis of concrete structures are applied to formulate a cellular reinforced concrete beam element with temperature-dependent characteristics. The effectiveness and applicability in engineering practice of the proposed formulation is demonstrated through applications. The results prove the accuracy of the proposed procedure and show that, for statically indeterminate structures, fire safety needs to be evaluated at the global level by taking into account the actual role played by the structural scheme.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study has been partially supported by research funds UNSPECIFIEDPRIN2005 (prot. UNSPECIFIED2005082490), Italian Ministry of University and Research—Department of Structural Engineering, Politecnico di Milano.
References
American Concrete Institute (ACI)/Minerals, Metals and Materials Society (TMS). (2007). “Code requirements for determining fire resistance of concrete and masonry construction assemblies.” ACI 216.1-07/TMS-0216-07, Farmington Hills, MI.
Anderberg, Y. (1988). “Modelling steel behaviour.” Fire Saf. J., 13(1), 17–26.
Anderberg, Y. (1991). “SUPER-TEMPCALC.” A commercial and user friendly computer program with automatic fem-generation for temperature analysis of structures exposed to heat, Fire Safety Design, Lund, Sweden.
Anderberg, Y., and Thelandersson, S. (1976). “Stress and deformation characteristics of concrete at high temperatures. 2. Experimental investigation and material behaviour model.” Bulletin 54, Lund Institute of Technology, Lund, Sweden.
ASTM. (1976). “Standard methods of fire tests of buildings construction and materials.” E119-76, West Conshohocken, PA.
Becker, J., and Bresler, B. (1974). “FIRES-RC: A computer program for the fire response of structures—Reinforced concrete frames.” Rep. UCB FRG 74-3, Fire Research Group, Univ. of California, Berkeley, CA.
Biondini, F. (2004). “A three-dimensional finite beam element for multiscale damage measure and seismic analysis of concrete structures.” 13th World Conf. on Earthquake Engineering (WCEE), Paper No. 2963, International Association for Earthquake Engineering (IAEE), Tokyo.
Biondini, F., Bontempi, F., Frangopol, D. M., and Malerba, P. G. (2004). “Cellular automata approach to durability analysis of concrete structures in aggressive environments.” J. Struct. Eng., 130(11), 1724–1737.
Biondini, F., and Nero, A. (2006). “Nonlinear analysis of concrete structures exposed to fire.” 2nd fib Congress, Paper 12-5, fib, Lausanne, Switzerland.
Biondini, F., and Nero, A. (2007). “Fire performance analysis of concrete structures.” Concrete under Severe Conditions: Environment & Loading (CONSEC’07), Metratech, Tours, France.
Bontempi, F., Malerba, P. G., and Romano, L. (1995). “Formulazione diretta secante dell’analisi non lineare di telai in C.A./C.A.P.” Studi e Ricerche, Milan, Italy, 16, 351–386 (in Italian).
Buchanan, A. H. (2001). Structural design for fire safety, Wiley, New York.
Caner, A., Zlatanic, S., and Munfah, N. (2005). “Structural fire performance of concrete and shotcrete tunnel liners.” J. Struct. Eng., 131(12), 1920–1925.
European Committee for Standardization (CEN). (2004). “Design of concrete structures—Part1-2: General rules—Structural fire design.” EN 1992-1-2, Brussels.
Forsén, N. E. (1982). “A theoretical study on the fire resistance of concrete structures.” SINTEF Rep. STF65 A82062, Cement and Concrete Research Institute, Norwegian Institute of Technology, Trondheim, Norway.
Franssen, J. M. (1987). “Etude du comportement au feu des structures mixtes acier-béton.” Collection des publications de la F.S.A., 111, Université de Liège, Liège, Belgium.
Franssen, J. M., Kodur, V. K. R., and Mason, J. (2000). “User’s manual for SAFIR. A computer program for analysis of structures submitted to the fire.” Rapport interne SPEC/2000 03, Univ. of Liège, Ponts et Charpentes, Liège, Belgium.
Hertz, K. (1985). Analysis of prestressing concrete structures exposed to fire, Technical Univ. of Denmark, Lyngby, Denmark.
Iding, R., Bresler, B., and Nizamuddin, Z. (1977). “FIRES-T3: A computer program for the fire response of structure-thermal.” Rep. UCB FRG 77-15, Univ. of California, Berkeley.
Incropera, F. P., and De Witt, D. P. (2002). Fundamentals of heat and mass transfer, Wiley, New York.
ISO. (1975). “Fire-resistance tests—Elements of building construction.” 834-1975, Geneva.
Kodur, V. K. R., and Dwaikat, M. B. (2008). “Effect of fire induced spalling on the response of reinforced concrete beams.” Int. J. Concr. Struct. Mater., 2(2), 71–81.
Kodur, V. K. R., and Sultan, M. A. (2003). “Effect of temperature on thermal properties of high-strength concrete.” J. Mater. Civ. Eng., 15(2), 101–107.
Malerba, P. G., ed. (1998). Analisi limite e non lineare di strutture in calcestruzzo armato, International Centre for Mechanical Sciences (CISM), Udine, Italy (in Italian).
Nero, A. (2006). “Analisi non lineare di strutture in calcestruzzo armato esposte ad incendio.” Degree thesis, Politecnico di Milano, Milan, Italy (in Italian).
Pichler, C., Lackner, R., and Mang, H. A. (2006). “Safety assessment of concrete tunnel linings under fire load.” J. Struct. Eng., 132(6), 961–969.
Rigberth, J. (2000). “Simplified design of fire exposed concrete beams and columns. An evaluation of Eurocode and Swedish building code against advanced computer models.” Rep. 5063, Dept. of Fire Safety Engineering, Lund Univ., Lund, Sweden.
Schneider, U. (1988). “Concrete at high temperatures—A general review.” Fire Saf. J., 13(1), 55–68.
Schneider, U., Schneider, M., and Franssen, J. M. (2008). “Consideration of nonlinear creep strain of siliceous concrete on calculation of mechanical strain under transient temperatures as a function of load history.” 5th Int. Conf. on Structures in Fire (SiF’08), Singapore, 463–476.
Sterner, E., and Wickström, U. (1990). “TASEF—Temperature analysis of structures exposed to fire.” SP Report 1990:05, Swedish National Testing and Research Institute, Borås, Sweden.
Wolfram, S. (1994). Cellular automata and complexity—Collected papers, Addison-Wesley, Reading, MA.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Dec 18, 2008
Accepted: Aug 23, 2010
Published online: Aug 25, 2010
Published in print: May 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.