Constitutive Model for Cyclic Response of Structural Steels with Yield Plateau
Publication: Journal of Structural Engineering
Volume 137, Issue 2
Abstract
A rate-independent cyclic plasticity model for structural steels with a yield plateau is proposed. The model couples nonlinear kinematic hardening with a memory surface in the plastic strain space, to account for the progressive cyclic hardening/softening effects and a pseudomemory surface in the deviatoric stress space to correctly describe the plateau response. A simple identification procedure to calibrate the material dependent parameters is outlined and the accuracy of the proposed model is verified against experimental data available in the literature for proportional and nonproportional loading paths.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers gratefully acknowledge the partial support by the National Science Foundation through Grant No. NSFCMS-0201371, and Dr. Peter Chang and Dr. Steven McCabe, program directors.
References
Armstrong, P. J., and Frederick, C. C. (1966). “A mathematical representation of the multiaxial Bauschinger effect.” CEGB Rep. No. RD/B/N731, Central Electricity Generating Board, Berkeley, U.K.
Backhaus, G. (1976). “Fließspannungen und Fließbendingung bei zyklischen Verformungen.” J. Appl. Math. Mech./Z. Angew. Math. Mech., 56(8), 337–348.
Benallal, A., LeGallo, P., and Marquis, D. (1989). “An experimental investigation of cyclic hardening of 316 stainless steel and of 2024 aluminum alloy under multiaxial loadings.” Nucl. Eng. Des., 114(3), 345–353.
Chaboche, J. L. (1986). “Time-independent constitutive theories for cyclic plasticity.” Int. J. Plast., 2(2), 149–188.
Chaboche, J. L., Dang Van, K., and Cordier, G. (1979). “Modelization of the strain memory effect on the cyclic hardening of 316 stainless steel.” Transactions of SMiRT-5, div. L paper no. L11/3, North-Holland, Amsterdam.
Chang, K. C., and Lee, G. C. (1986). “Constitutive relations of structural steel under nonproportional loading.” J. Eng. Mech., 112(8), 806–820.
Cofie, N. G., and Krawinkler, H. (1985). “Uniaxial cyclic stress-strain behavior of structural steel.” J. Eng. Mech., 111(9), 1105–1120.
Dafalias, Y. (1992). “Bounding surface plasticity model under cyclic loading.” Stability and ductility of steel structures under cyclic loading, Y. Fukumoto and G. C. Lee, eds., CRC, Boca Raton, Fla., 25–36.
Dafalias, Y. F., and Popov, E. P. (1975). “A model of nonlinearly hardening materials for complex loading.” Acta Mech., 21(3), 173–192.
Dafalias, Y. F., and Popov, E. P. (1976). “Plastic internal variables formalism of cyclic plasticity. J. Appl. Mech., 43(4), 645–651.
Goto, Y., Wang, Q. Y., and Obata, M. (1998). “FEM analysis for hysteretic behavior of thin-walled steel columns.” J. Struct. Eng., 124(11), 1290–1301.
Hall, E. O. (1970). Yield point phenomena in metals and alloys, Plenum, New York.
Kowalewski, Z. L., and Sliwowski, M. (1997). “Effect of cyclic loading on the yield surface evaluation of 18G2A low-alloy steel.” Int. J. Mech. Sci., 39(1), 51–68.
Lehmann, T., Raniecki, B., and Trampczynski, W. (1985). “The Bauschinger effect in cyclic plasticity.” Arch. Mech., 37(6), 643–659.
McDowell, D. L. (1985). “A two surface model for transient nonproportional cyclic plasticity: Part 1. Development of appropriate equations.” J. Appl. Mech., 52(2), 298–308.
Ohno, N. (1982). “A constitutive model of cyclic plasticity with a non-hardening strain region.” J. Appl. Mech., 49(4), 721–727.
Peil, U., Scheer, J., and Scheibe, H., Reininghaus, M., Kuck, D., and Dannemeyer, S. (2001). “On the behavior of mild steel Fe 510 under complex cyclic loading.” Plasticity of metals: Experiments, models, computation, E. Steck, R. Ritter, U. Peil, and A. Ziegenbein, eds., Collaborative Research Centers, Wiley-VCH Verlag GmhH, Weinheim, Germany, 218–252.
Petersson, H., and Popov, E. P. (1977). “Constitutive relations for generalized loading.” J. Eng. Mech. Div., 103(EM4), 611–627.
Rodzik, P. (1999). “Cyclic hardening rule for structural steels with yield plateau.” J. Eng. Mech., 125(12), 1331–1343.
Shen, C., Mamaghani, I. H. P., Mizuno, E., and Usami, T. (1995). “Cyclic behavior of structural steels. II: Theory.” J. Eng. Mech., 121(11), 1165–1172.
Sugiura, K., Lee, G. C., and Chang, K. C. (1987). “Endochronic theory for structural steel under nonproportional loading.” J. Eng. Mech., 113(12), 1901–1971.
Valanis, K. C. (1971). “A theory of viscoplasticity without a yield surface.” Arch. Mech., 23(4), 517–551.
Whittaker, A., Constantinou, M., and Tsopelas, P. (1998). “Displacement estimates for performance-based seismic design.” J. Struct. Eng., 124(8), 905–912.
Information & Authors
Information
Published In
Copyright
© 2011 ASCE.
History
Received: Oct 9, 2009
Accepted: Jul 15, 2010
Published online: Aug 2, 2010
Published in print: Feb 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.