Blast Resistance of Steel Plate Shear Walls Designed for Seismic Loading
Publication: Journal of Structural Engineering
Volume 135, Issue 10
Abstract
Steel plate shear walls (SPSWs) have become an increasingly popular lateral force resisting system in buildings. Although originally conceived to resist earthquake forces, recent developments raised questions as to the ability of SPSWs to resist blast loading, whereby the plate would resist out-of-plane impulsive pressures. To investigate this, two 0.4-scale single story SPSW specimens, representing the first story of a four story prototype SPSW, were fabricated and subjected to explosive charges. The out-of-plane resistance of the infill plate was analyzed using nonlinear finite-element analysis (FEA) and yield line theory. Results of these analyses showed the out-of-plane resistance is governed by the large deformations and inelastic material behavior and that yield line theory significantly underestimated the out-of-plane resistance in comparison with the finite-element analysis for infill plates typical of SPSW construction. Based on these results a simplified plastic analysis procedure is proposed to estimate the out-of-plane resistance of SPSW infill plates that is shown to agree well with the results of the FEA. Results of the experimental investigation showed the SPSW had a limited capacity to resist out-of-plane blast loading and that the typical seismic detail for connecting the infill plate to the boundary frame might not be appropriate for blast applications.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported in part by the Earthquake Engineering Research Centers Program of the National Science Foundation under Grant No. NSFECC-9701471 to the Multidisciplinary Center for Earthquake Engineering Research. However, any opinions, findings, conclusions, and recommendations presented in this paper are those of the writers and do not necessarily reflect the views of the sponsors. Special thanks are given to James C. Ray at the Eng. Research Dev. Center of the USACE for his help and assistance in the logistics of the experiments.
References
AISC. (2005a). Seismic provisions for structural steel buildings, Chicago.
AISC. (2005b). Manual of steel construction, 13th Ed., Chicago.
ASCE. (2005). “Minimum design loads for buildings and other structures.” ASCE 7–05, Reston, Va.
Berman, J. W., and Bruneau, M. (2003). “Experimental investigation of light-gauge steel plate shear walls for the seismic retrofit of buildings.” Technical Rep. MCEER-03–0001, Multidisciplinary Center for Earthquake Engineering Research, Buffalo, N.Y.
Bridge Explosive Loading (BEL); version 1.1.0.3. (2004). U.S. Army Corps of Engineers, Engineering Research and Development Center, Vicksburg, Miss.
Driver, R. G., and Grondin, G. Y. (2001). “Steel plate shear walls: Now performing on the main stage.” Modern steel construction, AISC, Chicago.
Driver, R. G., Kulak, G. L., Kennedy, D. J. L., and Elwi, A. E. (1997). “Seismic behaviour of steel plate shear walls.” Structural Engineering Rep. No. 215, Dept. of Civil Engineering, Univ. of Alberta, Edmonton, Alberta, Canada.
FEMA. (2003). “NEHRP recommended provisions for seismic regulations for new buildings and other structures. 1: Provisions and 2: Commentary.” FEMA 450, Washington, D.C.
Fujikura, S., Bruneau, M., and Lopez-Garcia, D. (2008). “Experimental investigation of multihazard resistant bridge piers having concrete-filled steel tube under blast loading.” J. Bridge Eng., 13(6), 586–594.
Hibbitt, Karlsson, and Sorenson, Inc. (HKS). (2002a). “ABAQUS/Standard users’ manual.” Version 6.3, Hibbitt, Karlsson, and Sorenson, Inc., Pawtucket, R.I.
Hibbitt, Karlsson, and Sorenson, Inc. (HKS). (2002b). “ABAQUS/Explicit users’ manual.” Version 6.3, Hibbitt, Karlsson, and Sorenson, Inc., Pawtucket, R.I.
Ingerslev, A. (1923). “The strength of rectangular slabs.” Struct. Eng, 1(1), 3–14.
Mays, G. C., and Smith, P. D. (1995). Blast effects on buildings—Design of buildings to optimize resistance to blast loading, Telford, London.
Norville, H. S., and Conrath, E. J. (2006). “Blast-resistant glazing design.” J. Archit. Eng., 12(3), 129–136.
Park, R., and Gamble, W. L. (2000). Reinforced concrete slabs, 2nd Ed., Wiley, New York.
Rogers, R. L. (2002). “Building his profession.” Innovation: J. Assoc. Professional Engineers and Geoscientists of British Columbia, 6(2), 14–16.
Romero, E. M. (2003). “Construcción compuesta en edificios altos.” Proc., VII Simposio Internacional de Estructuras de Acero, Veracruz, Mexico.
Sabelli, R., and Bruneau, M. (2006). “Steel plate shear walls.” Steel design guide, American Institute of Steel Construction, Chicago.
Schumacher, A., Grondin, G. Y., and Kulak, G. L. (1999). “Connection of infill panels in steel plate shear walls.” Can. J. Civ. Eng., 26(5), 549–563.
Seilie, I. F., and Hooper, J. (2005). “Steel plate shear walls: Practical design and construction.” Modern Steel Constr., 45(4), 37–43.
Simmons, L., Woodson, S., and Sinno, R. R. (2008). “Reinforcing building facades with geotextile fabrics.” J. Archit. Eng., 14(2), 53–60.
Smith, P. D., and Hetherington, J. D. (1994). Blast and ballistic loading of structures, Butterworth-Heinemann, Oxford, U.K.
Starr, C. M., and Krauthammer, T. (2005). “Cladding-structure interaction under impact loads.” J. Struct. Eng., 131(8), 1178–1185.
Timler, P. A., and Kulak, G. L. (1983). “Experimental study of steel plate shear walls.” Structural Engineering Report No. 114, Dept. of Civil Engineering, Univ. of Alberta, Edmonton, Alberta, Canada.
Wanitkorkul, A., and Filiatrault, A. (2008). “Influence of passive supplemental damping systems on structural and nonstructural seismic fragilities of a steel building.” Eng. Struct., 30(3), 675–682.
Williams, D., Holland, C., Williamson, E., Bayrak, O., Marchand, K., and Ray, J. (2008). “Blast-resistant highway bridges: Design and detailing guidelines.” Proc., 10th Int. Conf. on Structures under Shock and Impact (SUSI), Algarve, Portugal.
Woodson, S. C., and Baylot, J. T. (1999). “Structural collapse: Quarter-scale model experiments.” Technical Rep. No. SL-99–8, U.S. Army Engineer Research and Development Center, Vicksburg, Miss.
Yang, T. Y., and Whittaker, A. (2002). “MCEER demonstration hospitals—Mathematical models and preliminary analysis results.” Technical Rep., Multidisciplinary Center for Earthquake Engineering Research, Univ. at Buffalo, Buffalo, N.Y.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Aug 15, 2008
Accepted: Mar 30, 2009
Published online: May 2, 2009
Published in print: Oct 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.