Development of a Wood-Frame Shear Wall Model in ABAQUS
Publication: Journal of Structural Engineering
Volume 135, Issue 8
Abstract
After modifications, the Bouc-Wen-Barber-Wen (BWBN) model was used in simulating the hysteretic behavior of wood light-frame shear walls. A complete shear wall model is composed of boundary framing members and two-diagonal modified BWBN hysteretic springs. The parameters of the springs can be estimated based on the shear wall test data or detailed shear wall simulation results. To verify the accuracy and efficiency of this shear wall model, a two-story residential building was simulated and a three-dimensional dynamic analysis was conducted on it. The resultant structural responses agreed with the test results well.
Get full access to this article
View all available purchase options and get full access to this article.
References
ABAQUS. (2005). ABAQUS analysis user’s manual (Version 6.5), Hibbitt, Karlsson, and Sorenson, Pawtucket, R.I.
Christovasilis, I. P., Filiatrault, A., and Wanitkorkul, A. (2007). “Seismic test of a full-scale two-story light-frame wood building: NEESWood benchmark test.” NEESWood Project Test Rep. No. NW01.
Collins, M., Kasal, B., Paevere, P., and Foliente, G. C. (2005a). “Three-dimensional model of light-frame wood buildings. I: Model description.” J. Struct. Eng., 131(4), 676–683.
Collins, M., Kasal, B., Paevere, P., and Foliente, G. C. (2005b). “Three-dimensional model of light-frame wood buildings. II: Experimental investigation and validation of analytical model.” J. Struct. Eng., 131(4), 684–692.
Dolan, J. D. (1989). “The dynamic response of timber shear walls.” Ph.D. dissertation, Dept. of Civil Engineering. Univ. of British Columbia, Vancouver, BC, Canada.
Dolan, J. D., and Carradine, D. M. (2003). “Nail fastener connections.” Rep. prepared for CUREE Nail Fastener Connections, Washington State Univ., Pullman, Wash.
Du, Y. (2003). “The development and use of a novel finite element for the evaluation of embedded fluid dampers within light-frame timber structures with seismic loading.” Ph.D. dissertation, Dept. of Civil and Environmental Engineering. Washington State Univ., Pullman, Wash.
Durham, J., Lam, F., and Prion, H. G. L. (2001). “Seismic resistance of wood shear walls with large OSB panels.” J. Struct. Eng., 127(12), 1460–1466.
Fischer, D., Filiatrault, A., Folz, B., Uang, C. -M., and Seible, F. (2001). “Shake table tests of a two-story house.” CUREE Publication No. W-06, Richmond, Calif.
Folz, B., and Filiatrault, A. (2001). “Cyclic analysis of wood shear walls.” J. Struct. Eng., 127(4), 433–441.
Folz, B., and Filiatrault, A. (2004a). “Seismic analysis of woodframe structures. I: Model formulation.” J. Struct. Eng., 130(9), 1353–1360.
Folz, B., and Filiatrault, A. (2004b). “Seismic analysis of woodframe structures. II: Model implementation and verification.” J. Struct. Eng., 130(9), 1361–1370.
He, M., Magnusson, H., Lam, F., and Prion, H. G. L. (1999). “Cyclic performance of perforated wood shear walls with oversize OSB panels.” J. Struct. Eng., 125(1), 10–18.
Kasal, B., and Leichti, R. J. (1992). “Nonlinear finite-element model for light-frame stud walls.” J. Struct. Eng., 118(11), 3122–3135.
Kasal, B., Leichti, R. J., and Itani, R. Y. (1994). “Nonlinear finite-element model of complete light-frame wood structures.” J. Struct. Eng., 120(1), 100–119.
Kasal, B., and Xu, H. (1997). “A mathematical model of connections with nonlinear nonconservative hysteretic behavior.” Earthquake performance and safety of timber structures, G. C. Foliente, ed., Forest Products Society, Madison, Wis., 105–107.
Kivell, B. T., Moss, P. J., and Carr, A. J. (1981). “Hysteretic modeling of moment resisting nailed timber joints.” New Zealand Nat. Soc. Earthquake Eng. Bull, 14(4), 233–245.
National Design Specification for Engineered Wood Construction. (2001). American Forest and Paper Association, Washington, D.C.
Paevere, P. J. (2002). “Full-scale testing, modelling and analysis of light-frame structures under lateral loading.” Ph.D. thesis, Dept. of Civil and Environmental Engineering, Univ. of Melbourne, Parkville, Victoria, Australia.
Salenikovich, A. J. (2000). “The racking performance of light-frame shear walls.” Ph.D. dissertation, Dept. of Wood Science and Forest Products, Virginia Polytechnic Institute and State Univ., Blacksburg, Va.
Tarabia, A. M. (1994). “Response of light-frame buildings due to earthquake loadings.” Ph.D. dissertation, Dept. of Civil and Environmental Engineering, Washington State Univ., Pullman, Wash.
Tarabia, A. M., and Itani, R. Y. (1997a). “Static and dynamic modeling of light-frame wood buildings.” Comput. Struc., 63(2), 319–334.
Tarabia, A. M., and Itani, R. Y. (1997b). “Seismic response of light-frame wood buildings.” J. Struct. Eng., 123(11), 1470–1477.
Xu, J., and Dolan, J. D. (2009). “Development of nailed wood joint element in ABAQUS.” J. Struct. Eng., 135(8), 968-976
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Jul 4, 2008
Accepted: Feb 9, 2009
Published online: Mar 2, 2009
Published in print: Aug 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.