Static Design Recommendations for Slotted End HSS Connections in Tension
Publication: Journal of Structural Engineering
Volume 135, Issue 7
Abstract
The design of slotted end hollow structural section connections in tension, according to the philosophy behind contemporary specifications [ANSI/AISC 360-05, CAN/CSA-S16-01, and EN 1993-1-8; 2005 (E)], requires checking several limit states to determine the connection capacity. From published data for these types of connections by the writers and other international researchers, a review and analysis of all prior work in this field has been made, with a focus on the current AISC specification. As a result, a new procedure for determining the capacity of such connections in tension is presented, which is shown to be a significant improvement over current international design provisions. Moreover, it is also shown to be applicable to elliptical, square, and rectangular hollow sections.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Financial support was provided by CONACYT (Consejo Nacional de Ciencia y Tecnología—México), CIDECT (Comité International pour le Développement et l’Etude de la Construction Tubulaire), and NSERC (Natural Sciences and Engineering Research Council of Canada).NRC Atlas Tube Inc. and IPSCO Inc. provided steel tube and plate, respectively, and Walters Inc. (Ontario) donated fabrication services.
References
Aalberg, A., and Larsen, P. K. (2000). “Strength and ductility of bolted connections in normal and high strength steels.” Proc., IMPLASṮ2000, Melbourne, Australia, Pergamon, New York, 487–494.
AISC. (2000). Load and resistance factor design specification for steel hollow structural sections, Chicago.
AISC. (2005). “Specification for structural steel buildings.” ANSI/AISC 360–05, Chicago.
Barth, K. E., Orbison, J. G., and Nukala, R. (2002). “Behavior of steel tension members subjected to uniaxial loading.” J. Constr. Steel Res., 58, 1103–1120.
Birkemoe, P. C., and Gilmor, M. I. (1978). “Behavior of bearing critical double-angle beam connections.” Eng. J., AISC, 15(4), 109–115.
British Steel. (1992). “Slotted end plate connections.” Rep. No. SL/HED/TN/22/-/92/D, Swinden Laboratories, Rotherham, U.K.
Canadian Standards Association (CSA). (1994). “Limit states design of steel structures.” CAN/CSA-S16.1–94, Toronto.
Canadian Standards Association (CSA). (2001). “Limit states design of steel structures.” CAN/CSA-S16–01, Toronto.
Cheng, J. J. R., and Kulak, G. L. (2000). “Gusset plate connection to round HSS tension members.” Eng. J., 37(4), 133–139.
Cheng, J. J. R., Kulak, G. L., and Khoo, H. (1996). “Shear lag effect in slotted tubular tension members.” Proc., 1st CSCE Structural Specialty Conf., Edmonton, Alba., Canada, Canadian Society for Civil Engineering, Montreal, 1103–1114.
Chesson, E., Jr., and Munse, W. H. (1963). “Riveted and bolted joints: truss type tensile connections.” J. Struct. Div., 89(1), 67–106.
Cunningham, T. J., Orbison, J. G., and Ziemian, R. D. (1995). “Assessment of American block shear load capacity predictions.” J. Constr. Steel Res., 35, 323–338.
Driver, R. G., Grondin, G. Y., and Kulak, G. L. (2006). “Unified block shear equation for achieving consistent reliability.” J. Constr. Steel Res., 62, 210–222.
Easterling, W. S., and Giroux, L. G. (1993). “Shear lag effects in steel tension members.” Eng. J., 30(3), 77–89.
Epstein, H. I. (1992). “An experimental study of block shear failure of angles in tension.” Eng. J., 29(2), 75–84.
Epstein, H. I., and Chamarajanagar, R. (1996). “Finite element studies for correlation with block shear tests.” Comput. Struct., 61, 967–974.
Epstein, H. I., and McGinnis, M. L. (2000). “Finite element modeling of block shear in structural tees.” Comput. Struct., 77, 571–582.
European Committee for Standardisation (CEN). (2005). “Eurocode 3: Design of steel structures—Part 1.8: design of joints.” EN1993-1-8: 2005(E), Brussels, Belgium.
Geschwindner, L. F. (2004). “Evolution of shear lag and block shear provisions in the AISC specification.” Proc., ECCS/AISC Workshop: Connections in Steel Structures V, Amsterdam, The Netherlands, Bouwen met Staal, The Netherlands, 21–26.
Gross, J. M., Orbison, J. G., and Ziemian, R. D. (1995). “Block shear test in high-strength steel angles.” Eng. J., 32(3), 117–122.
Hardash, S. G., and Bjorhovde, R. (1985). “New design criteria for gusset plates in tension.” Eng. J., 22(2), 77–84.
Kirkham, W. J., and Miller, T. H. (2000). “Examination of AISC LRFD shear lag design provisions.” Eng. J., 37(3), 83–98.
Korol, R. M., Mirza, F. A., and Mirza, M. Y. (1994). “Investigation of shear lag in slotted HSS tension members.” Proc., 6th Int. Symp. on Tubular Structures, Melbourne, Australia, 473–482.
Kulak, G. L., and Grondin, G. Y. (2001). “AISC LRFD rules for block shear in bolted connections—A review.” Eng. J., 38(4), 199–203.
Ling, T. W. (2005). “The tensile behaviour of gusset-plate welded connections in very high strength (VHS) tubes.” Ph.D. thesis, Monash Univ., Melbourne, Australia.
Martinez-Saucedo, G., Packer, J. A., and Willibald, S. (2006). “Parametric finite element study of slotted end connections to circular hollow sections.” Eng. Struct., 28, 1956–1971.
Orbison, J. G., Wagner, M. E., and Fritz, W. P. (1999). “Tension plane behavior in single-row bolted connections subject to block shear.” J. Constr. Steel Res., 49, 225–239.
Packer, J. A., and Henderson, J. E. (1992). Design guide for hollow structural section connections, 1st Ed., Canadian Institute of Steel Construction, Toronto.
Packer, J. A., and Henderson, J. E. (1997). Hollow structural section connections and trusses—A design guide, 2nd Ed., Canadian Institute of Steel Construction, Toronto.
Ricles, J. M., and Yura, J. A. (1983). “Strength of double-row bolted-web connections.” J. Struct. Eng., 109(1), 126–141.
Swanson, J. A., and Leon, R. T. (2000). “Bolted steel connections: Tests on t-stub components.” J. Struct. Eng., 126(1), 50–56.
Topkaya, C. (2004). “A finite element parametric study on block shear failure of steel tension members.” J. Constr. Steel Res., 60, 1615–1635.
Wilkinson, T., Petrovski, T., Bechara, E., and Rubal, M. (2002). “Experimental investigation of slot lengths in RHS bracing members.” Proc., 3rd Int. Conf. on Advances in Steel Structures, Hong Kong, 205–212.
Willibald, S., Packer, J. A., and Martinez-Saucedo, G. (2006). “Behaviour of gusset plate to round and elliptical hollow structural section end connections.” Can. J. Civ. Eng., 33, 373–383.
Yura, J. A., Birkemoe, P. C., and Ricles, J. M. (1982). “Beam web shear connections: An experimental study.” J. Struct. Div., 108(2), 311–325.
Zhao, X. L., Al-Mahaidi, R., and Kiew, K. P. (1999). “Longitudinal fillet welds in thin-walled C450 RHS members.” J. Struct. Eng., 125(8), 821–828.
Zhao, X. L., and Hancock, G. J. (1995). “Longitudinal fillet welds in thin cold-formed RHS members.” J. Struct. Eng., 121(11), 1683–1690.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Feb 14, 2008
Accepted: Dec 19, 2008
Published online: Jun 15, 2009
Published in print: Jul 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.