Comparative Investigation of Concrete Plasticity Models for Nonlinear Finite-Element Analysis of Reinforced Concrete Specimens
Publication: Practice Periodical on Structural Design and Construction
Volume 27, Issue 2
Abstract
The study presents the calibration procedure and the different challenges that arise with the selection of the material and plasticity parameters for the nonlinear finite-element analysis (FEA) of reinforced concrete structures. Two concrete models, the concrete damaged plasticity (CDP) and the concrete smeared cracking (CSC), are considered within the context of the computational model validation to provide a better understanding of their modeling parameters and to investigate their capabilities. The study describes each concrete model, and then previously tested plain and reinforced concrete specimens are analyzed under different loading conditions. The outcomes show that the CDP model predicts the response of the reinforced concrete specimens accurately, while the CSC model fails to capture the response of the analyzed specimens mainly due to convergence issues. Finally, the sensitivity of the numerical results on the fineness of the mesh is also presented, followed by suggestions to overcome this mesh sensitivity.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The authors would also like to thank the Natural Sciences and Engineering Research Council of Canada for the financial support provided through the grant: RGPIN-2017-04197 NSERC DG.
References
Adetifa, B., and M. Polak. 2005. “Retrofit of interior slab column connections for punching using shear bolts.” ACI Struct. J. 102 (2): 268–274. https://doi.org/10.14359/14278.
Aifantis, E. C. 1984. “On the microstructural origin of certain inelastic models.” J. Eng. Mater. Technol. 106 (4): 326–330. https://doi.org/10.1115/1.3225725.
Aifantis, E. C. 1987. “The physics of plastic deformation.” Int. J. Plast. 3 (3): 211–247. https://doi.org/10.1016/0749-6419(87)90021-0.
Bazant, Z. P., T. B. Belytschko, and T.-P. Chang. 1984. “Continuum theory for strain-softening.” J. Eng. Mech. 110 (12): 1666–1692. https://doi.org/10.1061/(ASCE)0733-9399(1984)110:12(1666).
Béton, C. E. I. D., and F. I. D. L. Précontrainte. 1993. CEB-FIP model code 1990: Design code. New York: Thomas Telford Publishing.
Bu, W., and M. A. Polak. 2009. “Seismic retrofit of reinforced concrete slab-column connections using shear bolts.” ACI Struct. J. 106 (4): 514. https://doi.org/10.1061/(ASCE)0733-9399(1984)110:12(1666).
Chen, A. C., and W.-F. Chen. 1975. “Constitutive relations for concrete.” J. Eng. Mech. 101 (4): 465–481. https://doi.org/10.1061/JMCEA3.0002034.
Crisfield, M. 1986. “Snap-through and snap-back response in concrete structures and the dangers of under-integration.” Int. J. Numer. Methods Eng. 22 (3): 751–767. https://doi.org/10.1002/nme.1620220314.
Dassault, S. 2012. Abaqus analysis user’s manual (v6.12). Providence, RI: Dassault Systèmes Simulia Corp.
Duvant, G., and J. L. Lions. 2012. Inequalities in mechanics and physics. Berlin: Springer.
Etse, G., and K. Willam. 1994. “Fracture energy formulation for inelastic behavior of plain concrete.” J. Eng. Mech. 120 (9): 1983–2011. https://doi.org/10.1061/(ASCE)0733-9399(1994)120:9(1983).
Gatuingt, F., and G. Pijaudier-Cabot. 2002. “Coupled damage and plasticity modelling in transient dynamic analysis of concrete.” Int. J. Numer. Anal. Methods Geomech. 26 (1): 1–24. https://doi.org/10.1002/nag.188.
Genikomsou, A. S., and M. A. Polak. 2015. “Finite element analysis of punching shear of concrete slabs using damaged plasticity model in ABAQUS.” Eng. Struct. 98 (Sep): 38–48. https://doi.org/10.1016/j.engstruct.2015.04.016.
Gopalaratnam, V., and S. P. Shah. 1985. “Softening response of plain concrete in direct tension.” J. Proc. 82 (3): 310–323. https://doi.org/10.14359/10338.
Hillerborg, A., M. Modéer, and P.-E. Petersson. 1976. “Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements.” Cem. Concr. Res. 6 (6): 773–781. https://doi.org/10.1016/0008-8846(76)90007-7.
Imran, I., and S. J. Pantazopoulou. 2001. “Plasticity model for concrete under triaxial compression.” J. Eng. Mech. 127 (3): 281–290. https://doi.org/10.1061/(ASCE)0733-9399(2001)127:3(281).
Ju, J. 1989. “On energy-based coupled elastoplastic damage theories: Constitutive modeling and computational aspects.” Int. J. Solids Struct. 25 (7): 803–833. https://doi.org/10.1016/0020-7683(89)90015-2.
Kupfer, H., H. K. Hilsdorf, and H. Rusch. 1969. “Behavior of concrete under biaxial stresses.” J. Proc. 66 (8): 656–666. https://doi.org/10.14359/7388.
Kupfer, H. B., and K. H. Gerstle. 1973. “Behavior of concrete under biaxial stresses.” J. Eng. Mech. Div. 99 (4): 853–866. https://doi.org/10.1061/JMCEA3.0001789.
Lapi, M., L. Secci, E. Teoni, A. P. Ramos, and M. Orlando. 2020. “A hybrid method for the calibration of finite element models of punching-shear in R/C flat slabs.” Comput. Struct. 238 (Oct): 106323. https://doi.org/10.1016/j.compstruc.2020.106323.
Lasry, D., and T. Belytschko. 1988. “Localization limiters in transient problems.” Int. J. Solids Struct. 24 (6): 581–597. https://doi.org/10.1016/0020-7683(88)90059-5.
Lee, J., and G. L. Fenves. 1998a. “A plastic-damage concrete model for earthquake analysis of dams.” Earthquake Eng. Struct. Dyn. 27 (9): 937–956. https://doi.org/10.1002/(SICI)1096-9845(199809)27:9%3C937::AID-EQE764%3E3.0.CO;2-5.
Lee, J., and G. L. Fenves. 1998b. “Plastic-damage model for cyclic loading of concrete structures.” J. Eng. Mech. 124 (8): 892–900. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:8(892).
Leonhardt, F., and R. Walther. 1962. Beiträge zur Behanbung der Schubprobleme in Stalbetonbau. Berlin: Beton und Stahlbetonbau.
Lubliner, J., J. Oliver, S. Oller, and E. Oñate. 1989. “A plastic-damage model for concrete.” Int. J. Solids Struct. 25 (3): 299–326. https://doi.org/10.1016/0020-7683(89)90050-4.
Mazars, J. 1984. Application de la mécanique de l’endommagement au comportement non linéaire et à la rupture du béton de structure. Washington, DC: Transportation Research Board.
Menetrey, P., and K. Willam. 1995. “Triaxial failure criterion for concrete and its generalization.” Struct. J. 92 (3): 311–318. https://doi.org/10.14359/1132.
Mirzazadeh, M. M., and M. F. Green. 2017. “Non-linear finite element analysis of reinforced concrete beams with temperature differentials.” Eng. Struct. 152 (Dec): 920–933. https://doi.org/10.1016/j.engstruct.2017.09.033.
Nakamura, H., and T. Higai. 2011. “Compressive fracture energy and fracture zone length of concrete.” In Modeling of inelastic behavior of RC structures under seismic loads. Reston, VA: ASCE.
Needleman, A. 1988. “Material rate dependence and mesh sensitivity in localization problems.” Comput. Methods Appl. Mech. Eng. 67 (1): 69–85. https://doi.org/10.1016/0045-7825(88)90069-2.
Ngo, D., and A. C. Scordelis. 1967. “Finite element analysis of reinforced concrete beams.” J. Proc. 64 (3): 152–163. https://doi.org/10.14359/7551.
Nielsen, M. P., and L. C. Hoang. 2016. Limit analysis and concrete plasticity. London: CRC Press.
Oliver, J. 1989. “A consistent characteristic length for smeared cracking models.” Int. J. Numer. Methods Eng. 28 (2): 461–474. https://doi.org/10.1002/nme.1620280214.
Pamin, J. K. 1996. “Gradient-dependent plasticity in numerical simulation of localization phenomena.” Ph.D. thesis, Dept. of Civil Engineering, Delft Univ. of Technology.
Pijaudier-Cabot, G., and Z. P. Bažant. 1987. “Nonlocal damage theory.” J. Eng. Mech. 113 (10): 1512–1533. https://doi.org/10.1061/(ASCE)0733-9399(1987)113:10(1512).
Pramono, E., and K. Willam. 1989. “Fracture energy-based plasticity formulation of plain concrete.” J. Eng. Mech. 115 (6): 1183–1204. https://doi.org/10.1061/(ASCE)0733-9399(1989)115:6(1183).
Rimkus, A., V. Cervenka, V. Gribniak, and J. Cervenka. 2020. “Uncertainty of the smeared crack model applied to RC beams.” Eng. Fract. Mech. 233 (Jun): 107088. https://doi.org/10.1016/j.engfracmech.2020.107088.
Salari, M., S. Saeb, K. Willam, S. Patchet, and R. Carrasco. 2004. “A coupled elastoplastic damage model for geomaterials.” Comput. Methods Appl. Mech. Eng. 193 (27–29): 2625–2643. https://doi.org/10.1016/j.cma.2003.11.013.
Stoner, J. G., and M. A. Polak. 2020. “Finite element modelling of GFRP reinforced concrete beams.” Comput. Concr. 25 (4): 369–382. https://doi.org/10.12989/cac.2020.25.4.369.
Sümer, Y., and M. Aktaş. 2015. “Defining parameters for concrete damage plasticity model.” Challenge J. Struct. Mech. 1 (3): 149–155. https://doi.org/10.20528/cjsmec.2015.07.023.
Voyiadjis, G. Z., and Z. N. Taqieddin. 2009. “Elastic plastic and damage model for concrete materials: Part I-Theoretical formulation.” Int. J. Struct. Changes Solids 1 (1): 31–59.
Wosatko, A., A. Winnicki, M. A. Polak, and J. Pamin. 2019. “Role of dilatancy angle in plasticity-based models of concrete.” Arch. Civ. Mech. Eng. 19 (4): 1268–1283. https://doi.org/10.1016/j.acme.2019.07.003.
Wu, J. Y., J. Li, and R. Faria. 2006. “An energy release rate-based plastic-damage model for concrete.” Int. J. Solids Struct. 43 (3–4): 583–612. https://doi.org/10.1016/j.ijsolstr.2005.05.038.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Aug 7, 2021
Accepted: Nov 8, 2021
Published online: Dec 24, 2021
Published in print: May 1, 2022
Discussion open until: May 24, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.