Design Guidelines of Cost-Effective Support System for Industrial Reactors
Publication: Practice Periodical on Structural Design and Construction
Volume 26, Issue 3
Abstract
This paper deals with the structural design aspects of support systems of industrial reactors. An overview of the geometric characteristics of vertical and horizontal reactors is presented. Finite element strategies to model the load transfer mechanism and soil/structure interactions are also described. Design parameters required for the foundation and pile supports are identified using various loading conditions. Design recommendations based on extensive analyses are proposed for vertical absorber stripper (VAS) and horizontal catalytic (HC) reactors. The proposed guidelines are cost-effective and can be utilized by engineers in practice to design the support system. The scope of the paper is limited to structural engineering design and construction aspects. The chemical and mechanical design aspects are not covered within the scope of this paper.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
References
Abdeen, R. H., M. Mel, M. Jami, S. Ihsan, and A. Ismail. 2016. “A review of chemical absorption of carbon dioxide for biogas upgrading.” Chin. J. Chem. Eng. 24 (6): 693–702. https://doi.org/10.1016/j.cjche.2016.05.006.
AISC. 2006. Steel construction manual. 14th ed. Chicago: AISC.
ASCE. 2010. Minimum design loads and other structures. ASCE/SEI 7. Reston, VA: ASCE.
ASCE. 2011. Wind loads for petrochemical and other industrial facilities. Reston, VA: ASCE.
Badescu, V. 2020. “Optimal design and operation of ammonia decomposition reactors.” Int. J. Energy Res. 44 (7): 5360–5384. https://doi.org/10.1002/er.5286.
Bartholomew, C. H., and R. J. Farrauto. 2005. Fundamentals of industrial catalytic processes. New York: Wiley.
Bedair, O. 2011a. “Stress analyses of deep plate girders used at oil and gas facilities with rectangular web penetrations.” Pract. Period. Struct. Des. Constr. 16 (3): 112–120. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000083.
Bedair, O. 2011b. “Cost-effective modeling strategies for spliced steel connections.” J. Appl. Math. Modell. 35 (4): 1881–1892. https://doi.org/10.1016/j.apm.2010.10.017.
Bedair, O. 2012a. “Interaction of multiple piping penetrations used in mining and petrochemical facilities.” J. Thin-Walled Struct. 52 (Mar): 158–164. https://doi.org/10.1016/j.tws.2011.11.005.
Bedair, O. 2012b. “Numerical and experimental comparisons for modeling procedures of bolted and riveted connections.” Int. J. Comput. Methods Eng. Sci. Mech. 13 (3): 184–196. https://doi.org/10.1080/15502287.2012.660233.
Bedair, O. 2013. “Engineering challenges in the design of Alberta’s oil-sand projects.” Pract. Period. Struct. Des. Constr. 18 (4): 247–260. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000163.
Bedair, O. 2014. “Modern steel design and construction used in Canada’s oil sands industry.” Steel Constr. 7 (1): 32–40. https://doi.org/10.1002/stco.201350005.
Bedair, O. 2015. “Rational design of pipe racks used for oil sands and petrochemical facilities.” Pract. Period. Struct. Des. Constr. 20 (2): 04014029. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000224.
Bedair, O. 2016. “Design of mobile facilities used in surface mining projects.” Pract. Period. Struct. Des. Constr. 21 (1): 04015007. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000257.
Bedair, O. 2020. “Economical damage classification approach for blast-resistant buildings in petrochemical plants.” Pract. Period. Struct. Des. Constr. 25 (3): 04020020. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000503.
CSA (Canadian Standards Association). 2004. Design of concrete structures. Rexdale, ON, Canada: CSA.
CSA (Canadian Standards Association). 2007. Limit states design of steel structures. Rexdale, ON, Canada: CSA.
Di Sarno, L., and F. Pugliese. 2020. “Numerical evaluation of the seismic performance of existing reinforced concrete buildings with corroded smooth rebars.” Bull. Earthquake Eng. 18 (6): 4227–4273. https://doi.org/10.1007/s10518-020-00854-8.
Froment, G. F., and K. B. Bischoff. 1990. Chemical reactor analysis and design. New York: Wiley.
Levenspiel, O. 1998. Chemical reaction engineering. 3rd ed. New York: Wiley.
Martínez, J., E. León, F. M. Baena-Moreno, M. Rodríguez-Galán, F. Arroyo-Torralvo, and L. F. Vilches. 2020. “Techno-economic analysis of a membrane-hybrid process as a novel low-energy alternative for zero liquid discharge systems.” Energy Convers. Manage. 211 (May): 112783. https://doi.org/10.1016/j.enconman.2020.112783.
NBC (National Building Code). 2010. Part 4: Structural design. Ottawa: NRC.
PIP (Process Industry Practices). 2004. Structural design criteria. Austin, TX: PIP.
Scott Fogler, H. 2016. Elements of chemical reaction engineering. 5th ed. Hoboken, NJ: Prentice Hall.
Smith, J. M. 1981. Chemical engineering kinetics. 3rd ed. New York: McGraw-Hill.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Oct 12, 2020
Accepted: Mar 20, 2021
Published online: Jun 9, 2021
Published in print: Aug 1, 2021
Discussion open until: Nov 9, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.