Adaptive Curved Surface Slider for Improved Seismic Structural Performance
Publication: Practice Periodical on Structural Design and Construction
Volume 26, Issue 3
Abstract
The design of conventional curved surface sliders (CSSs) uses appropriate selections of effective radius and friction coefficient. These two design parameters are commonly optimized for the design basis earthquake (DBE). As a consequence, efficient structural isolation for weak and frequent earthquakes is hardly possible on the one hand and the isolator relative motion due to the maximum considered earthquake (MCE) becomes unacceptable large on the other hand. This trade-off problem is solved by adaptive stiffness and damping behaviors. The concept of the adaptive CSS is described, and its seismic performance is computed by nonlinear time history analysis using a nonlinear and experimentally validated model. The results demonstrate that the adaptive CSS significantly enhances seismic structural performance.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code generated or used during the study are proprietary or confidential in nature and may only be provided with restrictions. Because the models used for computations of the SIP-Adaptive with superstructure are described in detail here, they are available. The measurement data of the tested SIP-Adaptives 2 and 3 are presented in the paper as well, but the data are proprietary to Maurer SE.
Acknowledgments
The authors gratefully acknowledge the support of Maurer SE, Munich, Germany; Maurer Engineering GmbH, Munich, Germany; and Maurer Switzerland GmbH, Pfaffhausen, Switzerland.
References
Andersson, S., A. Söderberg, and S. Björklund. 2007. “Friction models for sliding dry, boundary and mixed lubricated contacts.” Tribol. Int. 40 (4): 580–587. https://doi.org/10.1016/j.triboint.2005.11.014.
Calvi, P. M., M. Moratti, and G. M. Calvi. 2016. “Seismic isolation devices based on sliding between surfaces with variable friction coefficient.” Earthquake Spectra 32 (4): 2291–2315. https://doi.org/10.1193/091515EQS139M.
CEN (European Committee for Standardization). 2009. Design of structures for earthquake resistance—Part 1: General rules, seismic actions and rules for buildings. Eurocode 8. Brussels: CEN.
Cornell, C. A. 1968. “Engineering seismic risk analysis.” Bull. Seismol. Soc. Am. 58 (5): 1583–1606.
Feng, M. Q., M. Shinozuka, and S. Fujii. 1993. “Friction-controllable sliding isolation system.” J. Eng. Mech. 119 (9): 1845–1864. https://doi.org/10.1061/(ASCE)0733-9399(1993)119:9(1845).
Fenz, D. M., and M. C. Constantinou. 2008a. “Modeling triple friction pendulum bearings for response-history analysis.” Earthquake Spectra 24 (4): 1011–1028. https://doi.org/10.1193/1.2982531.
Fenz, D. M., and M. C. Constantinou. 2008b. “Spherical sliding isolation bearings with adaptive behavior: Theory.” Earthquake Eng. Struct. Dyn. 37 (2): 163–183. https://doi.org/10.1002/eqe.751.
Inaudi, J. A. 1997. “Modulated homogeneous friction: A semi-active damping strategy.” Earthquake Eng. Struct. Dyn. 26 (3): 361–376. https://doi.org/10.1002/(SICI)1096-9845(199703)26:3%3C361::AID-EQE648%3E3.0.CO;2-M.
Kataria, N. P., and R. S. Jangid. 2016. “Seismic protection of the horizontally curved bridge with semi-active variable stiffness damper and isolation system.” Adv. Struct. Eng. 19 (7): 1103–1117. https://doi.org/10.1177/1369433216634477.
Kobori, T., M. Takahashi, T. Nasu, and N. Niwa. 1993. “Seismic response controlled structure with active variable stiffness system.” Earthquake Eng. Struct. Dyn. 22 (11): 925–941. https://doi.org/10.1002/eqe.4290221102.
Medeot, R. 2008. “Experimental validation of re-centering capability evaluation based on energy concepts.” In Proc., 14th World Conf. on Earthquake Engineering. Beijing: Chinese Association of Earthquake Engineering.
Naeim, F., and J. M. Kelly. 1999. Design of seismic isolated structures. New York: Wiley.
Nagarajaiah, S., and S. Sahasrabudhe. 2006. “Seismic response control of smart sliding isolated buildings using variable stiffness systems: An experimental and numerical study.” Earthquake Eng. Struct. Dyn. 35 (2): 177–197. https://doi.org/10.1002/eqe.514.
Quaglini, V., E. Gandelli, and P. Dubini. 2017. “Experimental investigation of the re-centring capability of curved surface sliders.” Struct. Control Health Monit. 24 (2): e1870. https://doi.org/10.1002/stc.1870.
Ruderman, M. 2015. “Presliding hysteresis damping of LuGre and Maxwell-slip friction models.” Mechatronics 30 (Sep): 225–230. https://doi.org/10.1016/j.mechatronics.2015.07.007.
Weber, F., H. Distl, and C. Braun. 2016. “Isolation performance of optimized triple friction pendulum.” Int. Refereed J. Eng. Sci. 5 (12): 55–69.
Weber, F., J. Distl, and C. Braun. 2017. “Isolation performance assessment of adaptive behaviour of triple friction pendulum.” J. Civ. Eng. Res. 7 (1): 17–33. https://doi.org/10.5923/j.jce.20170701.03.
Weber, F., J. Distl, L. Meier, and C. Braun. 2018. “Curved surface sliders with friction damping, linear viscous damping, bow tie friction damping and semi-actively controlled properties.” Struct. Control Health Monit. 25 (11): e2257. https://doi.org/10.1002/stc.2257.
Weber, F., J. Høgsberg, and S. Krenk. 2010. “Optimal tuning of amplitude proportional Coulomb friction damper for maximum cable damping.” J. Struct. Eng. 136 (2): 123–134. https://doi.org/10.1061/(ASCE)0733-9445(2010)136:2(123).
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Nov 3, 2020
Accepted: Mar 8, 2021
Published online: May 13, 2021
Published in print: Aug 1, 2021
Discussion open until: Oct 13, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.