Experimental Investigation for Degradation Analysis of an RC Italian Viaduct and Retrofitting Design
Publication: Practice Periodical on Structural Design and Construction
Volume 25, Issue 4
Abstract
The degradation state of RC bridge structures is one of the most important and difficult aspects to be interpreted. For these structures, structural analysis using FEM requires a reliable definition of the main mechanical properties of the materials constituting them and, in particular, a description of the actual damage state, which is a product of the damage they have suffered over the years. A general representation of material properties, including damage effects, can be performed by investigating the “global modulus (E)” of a structure. This can be determined by experimental determination of fundamental frequencies with an experimental analysis and the use of Rayleigh expressions. In this paper, referring to a practical case of a reinforced concrete Gerber beam with an advanced state of degradation, a static checkup was made using dynamic characterization. The state of the structure and its degradation due to corrosion and carbonation effects was analyzed using nondestructive and partially destructive tests. Moreover, dynamic tests were also performed to determine the fundamental frequencies (environmental trembling) to be used, through the Rayleigh method, to determine the global modulus of the structures, necessary for structural analysis. Then, a retrofitting design was designed and applied with partial reconstruction of the concrete deck by using high-performance concrete and by externally wrapping the main and secondary RC beams with carbon fiber-reinforced plastic (FRP) strips and wraps. Finally, a dynamic test was carried out to verify the efficiency of the retrofitting system adopted.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
No data, models, or code were generated during the study.
Acknowledgments
The authors wish to acknowledge Alessandro Zago, Nicola Maria Paoletti, and Silvano Vernizzi.
References
ACI (American Concrete Institute). 2013. ACI concrete practices non destructive testing: Covermeters. ACI 228.2R-2.51. Farmington Hills, MI: ACI.
ACI (American Concrete Institute). 2019. Building code requirements for reinforced concrete. ACI 318-19. Farmington Hills, MI: ACI.
Azenha, M., R. Faria, F. Magalhães, L. Ramos, and Á. Cunha. 2012. “Measurement of the E-modulus of cement pastes and mortars since casting, using a vibration based technique.” Mater. Struct. 45 (1–2): 81–92. https://doi.org/10.1617/s11527-011-9750-9.
Bergamo, O. 2016. “Application of an integrated seismic isolation system in bridge design: Three viaducts in Venice, Italy.” Struct. Eng. Int. 26 (4): 375–380. https://doi.org/10.2749/101686616X14555428759325.
Bergamo, O., G. Russo, and S. Donadello. 2014. “Retrofitting of the historic Castagnara bridge in Padua, Italy, with fibre reinforced plastic elements.” Struct. Eng. Int. 24 (4): 532–543. https://doi.org/10.2749/101686614X13854694314289.
Bertolino, P., and L. Pedeferri. 1996. The corrosion in concrete and in natural environment. New York: McGraw-Hill.
Brencich, A., and L. Gambarotta. 2009. “Assessment procedure and rehabilitation of riveted railway girders: The Campasso bridge.” Eng. Struct. 31 (1): 224–239. https://doi.org/10.1016/j.engstruct.2008.07.007.
BSI (British Standards Institution). 2014. Testing concrete. Part 204—Recommendations on the use of electromagnetic covermeters. BS 1881:204. London: BSI.
EUROCODE 2. 2005. Concrete, reinforced and prestressed concrete structures. Part 1—Design and construction. DIN 1045-1. Berlin: Deutsches Institut für Normung.
Morbin, R., M. A. Zanini, C. Pellegrino, H. Zhang, and C. Modena. 2015. “A probabilistic strategy for seismic assessment and FRP retrofitting of existing bridges.” Bull. Earthquake Eng. 13 (8): 2411–2428. https://doi.org/10.1007/s10518-015-9725-2.
Pellegrino, C., M. A. Zanini, P. Zampieri, and C. Modena. 2014. “Contribution of in situ and laboratory investigations for assessing seismic vulnerability of existing bridges.” Struct. Infrastruct. Eng. 11 (9): 1147–1162. https://doi.org/10.1080/15732479.2014.938661.
Russo, G., O. Bergamo, and L. Damiani. 2009. “Retrofitting a short span bridge with a semi-integral abutment bridge: The Treviso bridge.” Struct. Eng. Int. 19 (2): 137–141. https://doi.org/10.2749/101686609788220051.
Russo, G., O. Bergamo, L. Damiani, and D. Lugato. 2010. “Experimental analysis of the ‘Saint Andrea’ Masonry Bell Tower in Venice. A new method for the determination of ‘Tower Global Young’s Modulus E’.” Eng. Struct. 32 (2): 353–360. https://doi.org/10.1016/j.engstruct.2009.08.002.
Zanini, A. M., F. Faleschini, and C. Pellegrino. 2017. “Probabilistic seismic risk forecasting of aging bridge networks.” Eng. Struct. 136 (Apr): 219–232. https://doi.org/10.1016/j.engstruct.2017.01.029.
Zanini, M. A., C. Pellegrino, R. Morbin, and C. Modena. 2013. “Seismic vulnerability of bridges in transport networks subjected to environmental deterioration.” Bull. Earthquake Eng. 11 (2): 561–579. https://doi.org/10.1007/s10518-012-9400-9.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Dec 18, 2019
Accepted: Apr 6, 2020
Published online: Aug 19, 2020
Published in print: Nov 1, 2020
Discussion open until: Jan 19, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.