Innovative Launch of Long-Span Arch Bridge Across Waterway Using Special Hydraulic Crawler
Publication: Practice Periodical on Structural Design and Construction
Volume 25, Issue 3
Abstract
The construction of a 140-m spanned arch bridge adopted an innovative launching method in which the steel superstructure with a total weight of 2,120 t was entirely assembled and erected on the south side, and then launched northward to span the watercourse. A special hydraulic crawler machinery system was used to drive the launch. Temporary structural and geotechnical facilities, including four launching tracks and their supporting foundations and structures, were designed and implemented. Many investigations were conducted to study the structural and/or geotechnical behaviors related to the launch process and the temporary facilities. In situ geotechnical load tests were carried out for the design of the supporting foundations. The elevations of the superstructure and the temporary facilities were monitored to ensure their vertical alignment. The surface strain in the steel elements of the superstructure and in the launching rails was measured in real time. The results of these investigations are presented, and the lessons learned are discussed.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code generated or used during the study are available from the corresponding author by request. For instance, the available data include the data for plotting the curves in Figs. 8, 9(b), 10(b), 11(d), 12, 14, and 15(b).
Acknowledgments
This research was funded by the Ministry of Science and Technology of the Taiwan Government and Hung Shun Engineering Co., Ltd., Miaoli County, Taiwan, through Grant MOST 105-2622-E-260-001-CC3. The authors also gratefully acknowledge the assistance of J.-W. Ke, former graduate student at National Chi Nan University, Taiwan, and Y.-T. Chen and Y.-L. Chen, former graduate students at Cheng Shiu University.
References
AREMA (American Railway Engineering and Maintenance-of-Way Association). 2006. Economics of railway engineering and operations—Construction and maintenance operations. Lanham, MD: AREMA.
ASTM. 2018. Standard specification for structural steel for bridges. ASTM A709/A709M-18. West Conshohocken, PA: ASTM.
Bian, Y. M., Y. H. Yan, L. Huang, and R. J. Zhu. 2013. “Design and implementation on CAN-bus-based hydraulic synchronous slippage control system.” [In Chinese.] Chin. J. Constr. Mach. 11 (2): 142–145.
Böttger, H. M., C. J. A. Bazán, and N. P. Saarman. 2016. “3D laser scanning for preservation and structural monitoring of historic California adobe missions.” J. Green Build. 11 (4): 1–14. https://doi.org/10.3992/jgb.11.4.1.1.
Cao, Z. 2011. “Application of hydraulic synchronized moving and lifting in hoisting of mill housing frames.” [In Chinese.] Shandong Metall. 33 (4): 76–78.
Chao, M., H.-J. Chiu, C.-W. Lu, and C.-H. Jeng. 2019. “Using three-dimensional laser scanning for monitoring a long-span arch bridge launch.” Proc. Inst. Civ. Eng. Bridge Eng. 172 (3): 204–216. https://doi.org/10.1680/jbren.18.00036.
Chiu, H.-J., M. Chao, C.-W. Lu, and C.-H. Jeng. 2016. “Innovative entire bridge launching for the construction of a 140 m arch steel bridge.” In Proc., 5th Int. Multi-Conf. on Engineering Technology Innovation. Taichung, Taiwan: DimensionWay.
Dally, J. W., and W. F. Riley. 1991. Experimental stress analysis. Hoboken, NJ: McGraw-Hill.
Gordon, S., and D. Lichti. 2007. “Modeling terrestrial laser scanner data for precise structural deformation measurement.” J. Surv. Eng. 133 (2): 72–80. https://doi.org/10.1061/(ASCE)0733-9453(2007)133:2(72).
Jeng, C.-H. 2019. “A time-lapse video of the arch bridge and the launching process.” Accessed December 6, 2019. https://youtu.be/Yw85hJEQjmA.
Ke, J.-Y. 2016. “Investigation on the full-bridge launching of a 140 m-spanned arch steel bridge using a hydraulic crawler machinery system.” [In Chinese.] Master’s thesis, Dept. of Civil Engineering, National Chi Nan Univ.
Li, S., and J. Wu. 2005. “Design of hydraulic synchronizing slippage control system.” [In Chinese.] Chin. J. Constr. Mach. 3 (1): 55–58.
Lichti, D. 2010. “A review of geometric model and self-calibration methods for terrestrial laser scanners.” Boletim de Ciências Geodésicas (Geodetic Sciences Bulletin) 16 (1): 3–19.
Olsen, M. J., F. Kuester, B. J. Chang, and T. C. Hutchinson. 2010. “Terrestrial laser scanning-based structural damage assessment.” J. Comput. Civ. Eng. 24 (3): 264–272. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000028.
Pan, L. P. 2008. “Research for horizontal moving installing techniques of super sized components and equipments.” [In Chinese.] Constr. Mach. 2: 99–101.
Park, C. S., H. P. Jeon, K. S. Choi, J. P. Kim, and N. K. Park. 2018. “Application of 3D laser scanner to forensic engineering.” J. Forensic Sci. 63 (3): 930–934. https://doi.org/10.1111/1556-4029.13632.
Sadeghi, J. 2012. “New advances in design of railway track system.” Accessed April 19, 2020. http://www.intechopen.com/books/reliability-and-safety-in-railway/new-advances-in-design-of-railway-tracksystem.
Sadeghi, J., and P. Barati. 2010. “Evaluation of conventional methods in analysis and design of railway track system.” Int. J. Civ. Eng. 15 (1): 44–56. https://doi.org/10.1007/s40999-016-0046-x.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Sep 27, 2019
Accepted: Jan 31, 2020
Published online: Apr 30, 2020
Published in print: Aug 1, 2020
Discussion open until: Sep 30, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.