Risk Priority Number for Bridge Failures
Publication: Practice Periodical on Structural Design and Construction
Volume 25, Issue 2
Abstract
One of the important and systematic methods that is used for the identification of failure of any system is the failure mode and effect analysis (FMEA). This is carried out through the identification of the most important causes of all the failure modes of a system under consideration. FMEA is based on the concepts of a probabilistic analysis. In the present study, a corresponding equivalent deterministic method has been developed in terms of a risk priority number (RPN) formulation with its application to bridge failures. The RPN will enable the practicing engineers to rank various bridge failures and take necessary steps to mitigate the associated risk.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
The data used for calculation can be provided by the corresponding author by request.
Acknowledgments
Firstly, we would like to thank the anonymous reviewer(s), whose constructive comments have significantly enhanced the quality of this manuscript. We also sincerely thank Prof. Satyabrata Choudhury, Department of Civil Engineering, NIT Silchar, for proof-reading the paper and suggesting corrections for better readability.
References
CFR (Code of Federal Regulations). 2010. Code of federal regulations: Management and monitoring systems. Washington, DC: Dept. of Transportation.
Cristea, G., and D. Constantinescu. 2017. “A comparative critical study between FMEA and FTA risk analysis methods.” IOP Conf. Series: Mater. Sci. Eng. 252 (1): 012046. https://doi.org/10.1088/1757-899X/252/1/012046.
Das, S., S. Dutta, C. S. Putcha, S. Majumdar, and D. Adak. 2020. “A data-driven physics informed method for prognosis of infrastructure systems: Theory and application to crack prediction.” J. Risk Uncertainty Eng. Syst. Part A: Civ. Eng. 6 (2): 04020013. https://doi.org/10.1061/AJRUA6.0001053.
Dutta, S., and A. H. Gandomi. Forthcoming. “Surrogate model-driven evolutionary algorithms: Theory and applications.” In Evolution in action–Past, present, and future: A festschrift in honor of Erik Goodman’s 75th birthday, edited by W. Banzhaf. Berlin: Springer.
Dutta, S., and A. H. Gandomi. 2019. “Design of experiments for uncertainty quantification based on polynomial chaos expansion metamodels.” In Handbook of probabilistic models, edited by P. Samui. Amsterdam, Netherlands: Elsevier.
Dutta, S., S. Ghosh, and M. M. Inamdar. 2017. “Reliability-based design optimization of frame-supported tensile membrane structures.” ASCE-ASME J. Risk Uncertainty Eng. Syst. Part A: Civ. Eng. 3 (2): G4016001. https://doi.org/10.1061/AJRUA6.0000866.
Dutta, S., and C. S. Putcha. 2019. “Reliability-based design optimization of a large-scale truss structure using polynomial chaos expansion metamodel.” In Reliability, safety and hazard assessment for risk-based technologies, edited by P. V. Varde. Berlin: Springer.
Ebeling, C. E. 1997. An introduction to reliability and maintainability engineering. New York: McGraw-Hill.
Henley, E. J., and H. H. Kumamoto. 1981. Reliability engineering and risk assessment. Upper Saddle River, NJ: Prentice Hall.
Internet Open Sources. 2019. “List of bridge failures.” Accessed March 25, 2019. https://en.wikipedia.org/wiki/List_of_bridge_failures.
Nowak, A. S., and K. R. Collins. 2013. Reliability of structures, 2nd ed. Boca Raton, FL: CRC Press.
Putcha, C. S. 2007. “Software reliability—Engineering point of view.” In Proc., 2007 Int. Conf. on Software Engineering Research & Practice, 392–396. Las Vegas, NV: CSREA Press.
Putcha, C. S., P. Kalia, F. Pizzano, G. Hoskins, C. Newton, and K. J. Kamdar. 2008. “A case study on FMEA applications to system reliability studies.” Int. J. Reliab. Qual. Saf. Eng. 15 (2): 159–166. https://doi.org/10.1142/S0218539308003003.
Putcha, C. S., D. F. Kip Mikula, R. A. Dueease, T. Jensen, R. L. Peercy, and L. Dang. 2004. “Risk methodology for failed hardware.” Int. J. Model. Simul. 24 (3): 105–113. https://doi.org/10.1080/02286203.2004.11442294.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Mar 25, 2019
Accepted: Nov 4, 2019
Published online: Mar 9, 2020
Published in print: May 1, 2020
Discussion open until: Aug 9, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.