Methodological Contribution of K. W. Johansen to Structural Analysis of Long Cylindrical Roof Shells: Beam Method
Publication: Practice Periodical on Structural Design and Construction
Volume 24, Issue 4
Abstract
Evaluating the state of stress of a cylindrical shell based on elastic analysis originally involved a series of hypotheses concerning the conditions around it and the structural material used. All of these hypotheses involved either idealizing a reality that was impossible to ascertain a priori, or referring to an ideal, homogeneous, and isotopic material, even though RC does not have any of those properties. However, it was impossible to guarantee that the state of stress obtained in the shell represented the indisputable real state of the structure. Due to the progress made in the study of plastic methods, a key figure in this context is Knud Winstrup Johansen; in 1944, he published a pioneering article which set out the origin of the application of limit analysis to the structural calculation of long cylindrical roof shells based on a plastic approach to equilibrium, enabling simple and accurate calculation of these types of structure.
Get full access to this article
View all available purchase options and get full access to this article.
References
Assan, A. E. 2002. “Nonlinear analysis of reinforced concrete cylindrical shells.” Comput. Struct. 80 (27–30): 2177–2184. https://doi.org/10.1016/S0045-7949(02)00245-6.
Bredt, R. 1896. “Kritische Bemerkungen zur Drehungselastizitat.” Z. Ver. Dtsch. Ing. 40 (28): 785–790.
Chandrasekaran, S., S. K. Gupta, and F. Carannante. 2009. “Design aids for fixed support reinforced concrete cylindrical shells under uniformly distributed loads.” Int. J. Eng. Sci. Technol. 1 (1): 148–171.
Chen, W. F. 2007. Plasticity in reinforced concrete. Plantation, FL: J. Ross Publishing.
Dischinger, F. 1928. “Schalen und Rippenkuppeln.” In Vol. VI of Handbuch der Eisenbetonbau. 4a ed., edited by F. von Emperger, 163–383. Berlin: Wilhelm Ernst und Sohn.
Dischinger, F. 1935. “Die strenge Theorie der Kreiszylinderschale in ihrer Anwendung auf die Zei β-Dywidag-Schalen.” Beton u. Eisen 18: 257–294.
Dischinger, F. 1936. “Shell construction in reinforced concrete.” In Vol. 2 of Proc., 2nd Congress IABSE, 693–706. Paris: International Association for Bridge and Structural Engineering.
Dischinger, F., and U. Finsterwalder. 1928. “Eisenbetonschalendächer System Zeiss-Dywidag.” Der Bauingenieur 9 (44): 807–812.
Emperger, F. V. 1910. Handbuch für Eisenbetonbau: FlüssigkeitsbehalterRöhren. Berlin: Wilhelm Ernst & Sohn.
Finsterwalder, U. 1932. “Die Theorie der kreiszylindrischen Schalengewölbe System Zeiss-Dywidag und ihre anwendung auf die Grossmarkthalle in Budapest.” In Proc., Journal of Bridge and Structural Engineering. In 1st Congress IABSE, 127–152. Paris: International Association for Bridge and Structural Engineering.
Finsterwalder, U. 1936. “Cylindrical shell structures.” In Vol. 2 of Proc., 2nd Congress IABSE, 449–453. Paris: International Association for Bridge and Structural Engineering.
Flügge, W. 1934. Statik und dynamik der schalen. Berlin: Springer.
Gvozdev, A. A. 1936. “Opredelenie velichiny razrushayushchei nagruzki dlya statischeski neopredelimykh sister, preterpevayushchikh plasticheskie deformatsii.” In Proc., Conf. on Plastic Deformations, 19–30. Moscow-Leningrad: Akademia Nauk SSSR.
Jakobsen, A. Aas. 1937. “Sur le calcul de la voûte cylindrique circulaire.” Travaux 60: 529–535.
Jakobsen, A. Aas. 1939. “Über das Randstörungsproblem an Kreiszylinderschalen.” Der Bauingenieur 29: 394–405.
Jakobsen, A. Aas. 1940. “Beregningsmetoder for Skallkonstruksjoner.” Bygningsstatiske meddelelser 11: 49–64.
Jakobsen, A. Aas. 1941. “Einzellasten auf Kreiszylinderschalen.” Der Bauingenieur 22: 343–346.
Jawad, D. A. 2015. “Nonlinear finite element analysis of reinforced concrete cylindrical shells.” Basrah J. Eng. Sci. 15 (1): 86–97.
Johansen, K. W. 1944. “Skalkonstruktion paa Radiohuset.” Bygningsstatiske Meddelelser 15: 1–26.
Johansen, K. W. 1948. “Critical notes on the calculation and design of cylindrical shells.” In Vol. IV of Proc., 3rd Congress IABSE, 601–606. Paris: International Association for Bridge and Structural Engineering.
Kazinczy, G. V. 1914. “Experiments with clamped end beams.” Betonszemle 5: 101–104.
Kazinczy, G. V. 1933. “Die Plastizitat des Eisenbetons.” Beton Eisen 32 (5): 74–80.
Kazinczy, G. V. 1949. “Beräkning av cylindriska skal med hänsyn till den armerade betongens egenskaper.” Betong 34: 239–261.
Lundgren, H. 1949. “Cylindrical shells: Application of the theory of elasticity and the theory of rupture to the design of cylindrical roofs, tanks, tubes, pipe lines, and other thin-walled cylindrical structures.” In Vol. 1 of Cylindrical roofs. Copenhagen, Denmark: Danish Technical Press.
Maier-Leibnitz, H. 1936. “Test results, their interpretation and application.” In Vol. 2 of Proc., 2nd Congress IABSE, 97–130. Paris: International Association for Bridges and Structural Engineering.
Melan, E. 1936. “Theory of statically indeterminate systems.” In Vol. 2 of Proc., 2nd Congress IABSE, 42–64. Berlin: International Association for Bridge and Structural Engineering.
Pophare, S. M., and H. S. Jadhav. 2017. “A review on elasto-plastic behaviour of doubly curved thin shells.” IJETT 1 (1): 1–4.
Prager, W. 1952. “The general theory of limit design.” In Vol. 19 of Proc., 8th Int. Congress on Theoretical and Applied Mechanics, 65–72. Istanbul, Turkey: Univ. of Istanbul.
Reissner, H. 1908. “Über die Spannungsverteilung in zylindrischen Behälterwänden.” Beton Eisen 7 (6): 150–155.
Schorer, H. 1935. “Line load action on thin cylindrical shells.” Trans. Am. Soc. Civ. Eng. 101 (1): 767–802.
Statsradiofonien. 1946. Radiohuset: den Danske Statsradiofonis nybygning i Kobenhavn, 137. Copenhagen, Denmark: Akademisk Arkitektforening.
Suanno, R. L. M., L. B. Ferrari, and C. L. M. Prates. 2003. “Nonlinear analysis of reinforced concrete shells subjected to impact loads.” In Vol. 17 of Proc., SMiRT, 17–22. Raleigh, NC: International Association for Structural Mechanics in Reactor Technology.
Vallette, R. 1934. “Considérations sur les Voutes Minces Autoportantes et Leur Calcul.” Le Genie Civil 104: 85–88.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Oct 28, 2018
Accepted: Mar 5, 2019
Published online: Jul 8, 2019
Published in print: Nov 1, 2019
Discussion open until: Dec 8, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.