Progressive Collapse Analysis of Steel Braced Frames
Publication: Practice Periodical on Structural Design and Construction
Volume 24, Issue 2
Abstract
This paper studies the behavior of concentrically braced frames (CBFs) and eccentrically braced frames (EBFs) under a progressive collapse scenario, by using the alternate load path method, recommended in progressive collapse guidelines. The model structure is a 10-story steel moment frame with five bays in each direction. The present study has investigated the CBF with two types of failure scenarios, each of which examines the effects of reducing the brace’s sections, and the EBF, including three types of failure scenarios, each of which investigates the effects of link beam length on structural capacity. Failure scenarios include the sudden removal of a column with one or more adjacent braces on the ground floor, which, for simplicity, is examined in a two-dimensional form in a perimeter bay of the building. The ability of the structure to absorb and withstand extra load after the sudden removal of the members in each of the states is examined, and their capacity and ductility are compared. According to the results, both EBF and CBF systems can withstand the progressive collapse. Moreover, in the CBF system, while the cross sections of braces decrease, the ductility of the CBF structure increases.
Get full access to this article
View all available purchase options and get full access to this article.
References
Asgarian, B., and F. H. Rezvani. 2012. “Progressive collapse analysis of concentrically braced frames through EPCA algorithm.” J. Constr. Steel Res. 70 (Mar): 127–136. https://doi.org/10.1016/j.jcsr.2011.10.022.
Asprone, D., F. Jalayer, A. Prota, and G. Manfredi. 2010. “Proposal of a probabilistic model for multi-hazard risk assessment of structures in seismic zones subjected to blast for the limit state of collapse.” Struct. Saf. 32 (1): 25–34. https://doi.org/10.1016/j.strusafe.2009.04.002.
Blandford, G. E. 1996. “Progressive failure analysis of inelastic space truss structures.” Comput. Struct. 58 (5): 981–990. https://doi.org/10.1016/0045-7949(95)00217-5.
Chen, J., X. Huang, R. Ma, and M. He. 2012a. “Experimental study on the progressive collapse resistance of a two-story steel moment frame.” J. Perform. Constr. Facil. 26 (5): 567–575. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000287.
Chen, J., W. Peng, R. Ma, and M. He. 2012b. “Strengthening of horizontal bracing on progressive collapse resistance of multistory steel moment frame.” J. Perform. Constr. Facil. 26 (5): 720–724. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000261.
Ebrahimi, A. H., M. Ebadi Jamkhaneh, and M. Shokri Amiri. 2018. “3D finite-element analysis of steel moment frames including long-span entrance by strengthening steel cables and diagonal concentrically braced frames under progressive collapse.” Pract. Per. Struct. Des. Constr. 23 (4): 04018025. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000388.
Faghihmaleki, H., F. Nejati, S. Zarkandy, and H. Masoumi. 2017. “Evaluation of progressive collapse in steel moment frame with different braces.” Jordan J. Civ. Eng. 11 (2): 290–298.
General Service Administration (GSA). 2003. Progressive collapse analysis and design guidelines for new federal office buildings and major modernization projects. Washington, DC: GSA.
Khandelwal, K., S. El-Tawil, and F. Sadek. 2009. “Progressive collapse analysis of seismically designed steel braced frames.” J. Constr. Steel Res. 65 (3): 699–708. https://doi.org/10.1016/j.jcsr.2008.02.007.
Kim, J., and D. An. 2009. “Evaluation of progressive collapse potential of steel moment frames considering catenary action.” Struct. Des. Tall Special Build. 18 (4): 455–465. https://doi.org/10.1002/tal.448.
Kim, J., and T. Kim. 2009. “Assessment of progressive collapse-resisting capacity of steel moment frames.” J. Constr. Steel Res. 65 (1): 169–179. https://doi.org/10.1016/j.jcsr.2008.03.020.
Miyachi, K., S. Nakamura, and A. Manda. 2012. “Progressive collapse analysis of steel truss bridges and evaluation of ductility.” J. Constr. Steel Res. 78 (Nov): 192–200. https://doi.org/10.1016/j.jcsr.2012.06.015.
Murtha-Smith, E. 1988. “Alternate path analysis of space trusses for progressive collapse.” J. Struct. Eng. 114 (9): 1978–1999. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:9(1978).
Naji, A. 2016. “Modelling catenary effect in progressive collapse analysis of concrete structures.” Struct. Concr. 17 (2): 145–151. https://doi.org/10.1002/suco.201500065.
Naji, A. 2017. “Plastic limit analysis of truss structures subjected to progressive collapse.” Eur. J. Eng. Res. Sci. 2 (9): 31–35. https://doi.org/10.24018/ejers.2017.2.9.451.
Naji, A. 2018a. “Sensitivity and fragility analysis of steel moment frames subjected to progressive collapse.” Asian J. Civ. Eng. 19 (5): 595–606. https://doi.org/10.1007/s42107-018-0045-0.
Naji, A. 2018b. “Improving the tie force method for progressive collapse design of RC frames.” Int. J. Struct. Integr. 9 (4): 520–531. https://doi.org/10.1108/IJSI-10-2017-0058.
Naji, A., and F. Irani. 2012. “Progressive collapse analysis of steel frames: Simplified procedure and explicit expression for dynamic increase factor.” Int. J. Steel Struct. 12 (4): 537–549. https://doi.org/10.1007/s13296-012-4008-0.
Naji, A., and M. Rohani. 2017. “Progressive collapse analysis of reinforced concrete structures: A simplified procedure.” Eur. J. Eng. Res. Sci. 2 (10): 7–12. https://doi.org/10.24018/ejers.2017.2.10.474.
NIST. 2005. “Final rep. of the national construction safety team on the collapse of the World Trade Center twin towers.” In Proc., Federal Building and Fire Safety Investigation of the World Trade Center Disaster. Gaithersburg, MD: National Institute of Standards and Technology (NIST).
Salmasi, A. C., and M. R. Sheidaii. 2017. “Assessment of eccentrically braced frames strength against progressive collapse.” Int. J. Steel Struct. 17 (2): 543–551. https://doi.org/10.1007/s13296-017-6014-8.
Sasani, M., and J. Kropelnicki. 2008. “Progressive collapse analysis of an RC structure.” Struct. Des. Tall Special Build. 17 (4): 757–771. https://doi.org/10.1002/tal.375.
Sasani, M., and S. Sagiroglu. 2008. “Progressive collapse resistance of hotel San Diego.” J. Struct. Eng. 134 (3): 478–488. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:3(478).
Sun, R., Z. Huang, and I. W. Burgess. 2012. “The collapse behaviour of braced steel frames exposed to fire.” J. Constr. Steel Res. 72 (May): 130–142. https://doi.org/10.1016/j.jcsr.2011.11.008.
Xu, G., and B. R. Ellingwood. 2011. “An energy-based partial pushdown analysis procedure for assessment of disproportionate collapse potential.” J. Constr. Steel Res. 67 (3): 547–555. https://doi.org/10.1016/j.jcsr.2010.09.001.
Yi, W., Q. He, Y. Xiao, and S. K. Kunnath. 2008. “Experimental study on progressive collapse-resistant behavior of reinforced concrete frame structures.” ACI Struct. J. 105 (4): 433–439.
Information & Authors
Information
Published In
Copyright
© 2019 American Society of Civil Engineers.
History
Received: Aug 6, 2018
Accepted: Oct 24, 2018
Published online: Jan 30, 2019
Published in print: May 1, 2019
Discussion open until: Jun 30, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.