Testing Plan for Estimating In Situ Concrete Strength
Publication: Practice Periodical on Structural Design and Construction
Volume 24, Issue 2
Abstract
The British Standards Institution (BSI) permits core and nondestructive tests (NDTs), such as ultrasonic pulse velocity (UPV), rebound hammer, and pull-out tests, to estimate the in situ compressive strength of existing concrete structures. The ASTM test method, in addition, also permits the use of a penetration resistance test (e.g., Windsor probe). Sound engineering judgment and the appreciation of factors influencing each NDT and core test are required in developing the testing plan for estimating in situ compressive strength of concrete structures. There are precautions and practical considerations that must be recognized. The issues in using such tests for estimating in situ compressive strength would be discussed. The different approaches of the BSI codes to determine the in situ strength are illustrated with examples. Results obtained are compared to demonstrate the practical limitations of such approaches. Using any one of the NDTs or core tests yielded estimated in situ concrete compressive strengths that differed substantially.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The views and comments of Dr. Tam Chat Tim are gratefully acknowledged.
References
ASTM. 2010. Standard test method for penetration resistance of hardened concrete. ASTM C803/C803M-03. West Conshohocken, PA: ASTM.
Bartlett, F. M., and J. G. MacGregor. 1999. “Variation of in-place concrete strength in structures.” ACI Mater. J. 96 (2): 261–270.
BSI (British Standards Institution). 1972. Code of practice for the structural use of concrete-Part 1: Design, materials and workmanship. CP 110-1:1972. London: BSI.
BSI (British Standards Institution). 1978. Specification for ordinary and rapid-hardening Portland cement. BS 12:1978. London: BSI.
BSI (British Standards Institution). 1981. Guide to assessment of concrete strength in existing structures. BS 6089:1981. London: BSI.
BSI (British Standards Institution). 1983a. Specification for aggregates from natural sources for concrete. BS 882:1983. London: BSI.
BSI (British Standards Institution). 1983b. Testing concrete—Method for determination of the compressive strength of concrete cores. BS 1881-120:1983. London: BSI.
BSI (British Standards Institution). 1985. Structural use of concrete—Code of practice for design and construction. BS 8110-1:1985. London: BSI.
BSI (British Standards Institution). 1986a. Testing concrete—Guide to the use of non-destructive methods of test for hardened concrete. BS 1881-201:1986. London: BSI.
BSI (British Standards Institution). 1986b. Testing concrete—Recommendations for measurement of velocity of ultrasonic pulses in concrete. BS 1881-203:1986. London: BSI.
BSI (British Standards Institution). 2001. Testing concrete in structures—Non-destructive testing–Determination of rebound number. BS EN 12504-2:2001. London: BSI.
BSI (British Standards Institution). 2002. Eurocode 1. Actions on structures. General actions. Densities, self-weight, imposed loads for buildings. BS EN 1991-1-1:2002. London: BSI.
BSI (British Standards Institution). 2004. Testing concrete in structures—Determination of ultrasonic pulse velocity. BS EN 12504-4:2004. London: BSI.
BSI (British Standards Institution). 2007. Assessment of in-situ compressive strength in structures and pre-cast concrete components. BS EN 13791:2007. London: BSI.
BSI (British Standards Institution). 2009. Testing concrete in structures–Cored specimens–Taking, examining and testing in compression. BS EN 12504-1:2009. London: BSI.
BSI (British Standards Institution). 2010. Assessment of in-situ compressive strength in structures and precast concrete components. Complementary guidance to that given in BS EN 13791. BS 6089:2010. London: BSI.
Bungey, J. H., and S. G. Millard. 1996. Testing of concrete in structure. 3rd ed. London: Blackie Academic & Professional.
GBG Structural Services. 2018. “Materials testing and structural investigations.” Accessed May 15, 2018. http://www.gbg.co.uk/?page=strmenu.
Khoury, S., A. A. H. Aliabdo, and A. Ghazy. 2014. “Reliability of core test–Critical assessment and proposed new approach.” Alexandria Eng. J. 53 (1): 169–184. https://doi.org/10.1016/j.aej.2013.12.005.
Kog, Y. 2018. “Estimating in situ compressive strength of existing concrete structures.” Pract. Period. Struct. Des. Constr. 23 (3): 04018013. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000374.
Kog, Y. C. 1993. “Concrete and aggregates used in Singapore.” Concrete 27 (6): 23–26.
Kog, Y. C. 2012. “Sample size for determining in-situ strength of concrete in structures.” Mag. Concr. Res. 64 (11): 1045–1048.
Maynard, D. P., and S. G. Davis. 1974. “The strength of in-situ concrete.” Struct. Eng. 52 (10): 369–374.
Naik, T. R., V. M. Malhotra, and J. P. Popovics. 2004. “The ultrasonic pulse velocity method.” In Handbook on nondestructive testing of concrete. 2nd ed., edited by V. M. Malhotra and N. J. Carino. Boca Raton, FL: CRC.
Neville, A. M. 1995. Properties of concrete, 25. Essex, UK: Pearson Education.
Nitto Construction Inc. 2010. “CTS-02 Concrete Tester and Surveyor.” Accessed May 15, 2018. http://www.concretetester.com.
Information & Authors
Information
Published In
Copyright
© 2019 American Society of Civil Engineers.
History
Received: Jun 18, 2018
Accepted: Sep 24, 2018
Published online: Jan 18, 2019
Published in print: May 1, 2019
Discussion open until: Jun 18, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.