Safe Design: A Source for Innovation in the Built Environment
Publication: Practice Periodical on Structural Design and Construction
Volume 22, Issue 4
Abstract
For the safe design concept to take hold within the design community, the negative connotations of safety within the design world must be removed. Considering safety during the design phases of projects presents a key opportunity for innovative and creative responses that can not only enhance safety but also positively affect cost, quality, schedule, and other traditional business parameters. Safe design is an untapped source for innovation. This paper describes the creative opportunities that can occur when safe design is embedded and practiced. Examples are provided that demonstrate these innovations. Working up the hierarchy of controls, eliminating and reducing foreseeable site hazards is difficult but yields a greater opportunity for creativity. Construction and safety professionals should educate designers about these opportunities and adapt their approach to work with the design professions. Design professionals should evaluate safety as any other idea, approach safe design as an expansion of their design deliverables, and use it as a source for creative and innovative design.
Get full access to this article
View all available purchase options and get full access to this article.
References
Aires, M. D. M., Gámez, M. C. R., and Gibb, A. G. F. (2010). “Prevention through design: The effect of European directives on construction workplace accidents.” Saf. Sci., 48(2), 248–258.
Atkinson, A. R., and Westall, R. (2010). “The relationship between integrated design and construction and safety on construction projects.” Constr. Manage. Econ., 28(9), 1007–1017.
Behm, M. (2005). “Linking construction fatalities to the design for construction safety concept.” Saf. Sci., 43(8), 589–611.
Behm, M. (2012). “Safe design suggestions for vegetated roofs.” J. Constr. Eng. Manage., 999–1003.
Behm, M., and Culvenor, J. (2011). “Safe design in construction: Perceptions of engineers in western Australia.” J. Health Saf. Res. Pract., 3(1), 9–32.
Behm, M., Culvenor, J., and Dixon, G. (2014). “Development of safe design thinking among engineering students.” Saf. Sci., 63, 1–7.
Bluff, E. (2003). Regulating safe design and planning of construction works, National Research Centre for Occupational Health and Safety Regulation, Canberra, Australia.
Borys, D., Else, D., and Leggett, S. (2009). “The fifth age of safe: The adaptive age.” J. Health Saf. Res. Pract., 1(1), 19–27.
Burgelman, R. A., Christensen, C. M., and Wheelwright, S. C. (2004). Strategic management of technology and innovation, McGraw-Hill, Boston.
Cooke, T., Lingard, H., Blismas, N., and Stranieri, A. (2008). “ToolSHeD: The development and evaluation of a decision support tool for health and safety in construction design.” Eng. Constr. Archit. Manage., 15(4), 336–351.
Council on Competitiveness. (2005). “Innovate America, national innovation summit and report.” 〈http://www.compete.org/storage/images/uploads/File/PDF%20Files/NII_Innovate_America.pdf〉 (Apr. 9, 2017).
Culvenor, J. (1997). “The use of creativity techniques in OHS risk management.” Creativity Innovation Manage., 6(2), 99–105.
Culvenor, J. (2000). “From prevention to innovation.” Corp. Risk, 7(6), 39–44.
Culvenor, J. (2006). “Creating transformational change through innovation in risk management.” Proc., Risk Management Research and Practice: An Educational Perspective, Welsh Risk Pool and Univ. of Wales, Wales, U.K.
Drucker, P. F. (1985). “The discipline of innovation.” Harv. Bus. Rev., 63(3), 67–72.
Gambatese, J. A., and Hallowell, M. (2011). “Enabling and measuring innovation in the construction industry.” Constr. Manage. Econ., 29(6), 553–567.
HSE (Health and Safety Executive). (2007). “Improving the effectiveness of the construction (design and management) regulations 1994: Establishing views from construction stakeholders on the current effectiveness of CDM.” Rep. No. 538, Liverpool, U.K.
Huang, X., and Hinze, J. (2006). “Owner’s role in construction safety.” J. Constr. Eng. Manage., 164–173.
Hudson, P. (2003). “Applying the lessons of high risk industries to health care.” Qual. Saf. Health Care, 12(1), i7–i12.
Kale, S., and Arditi, D. (2010). “Innovation diffusion modeling in the construction industry.” J. Constr. Eng. Manage., 329–304.
Lingard, H., Blismas, N., Cooke, T., and Cooper, H. (2009). “The model client framework: Resources to help Australian government agencies to promote safe construction.” Int. J. Managing Projects Bus., 2(1), 131–140.
Lingard, H., Pirzadeh, P., Blismas, N., Wakefield, R., and Kleiner, B. (2014). “Exploring the link between early constructor involvement in project decision-making and the efficacy of health and safety risk control.” Constr. Manage. Econ., 32(9), 918–931.
Manley, K., McFallan, S., and Kajewski, S. (2009). “Relationship between construction firm strategies and innovation outcomes.” J. Constr. Eng. Manage., 764–771.
Marquis, D. G. (1988). “Anatomy of successful innovations.” Readings in the management of innovation, M. L. Tushman and W. L. Moore, eds., Ballinger, Boston, MA, 79–87.
Morrow, S., Cameron, I., and Hare, B. (2015). “The effects of framing on the development of the design engineer: Framing health and safety in design.” Archit. Eng. Des. Manage., 11(5), 338–359.
Petre, M. (2004). “How expert engineering teams use disciplines of innovation.” Des. Stud., 25(5), 477–493.
Porter, M. E. (1991). “America’s green strategy.” Sci. Am., 264(4), 168.
Porter, M. E. (1996). “What is strategy?” Harv. Bus. Rev., 74(6), 61–78.
Porter, M. E., and van der Linde, C. (1995). “Green and competitive: Ending the stalemate.” Harv. Bus. Rev., 73(5), 120–134.
Rylander, A. (2009). “Design thinking as knowledge work: Epistemological foundations and practical implications.” Des. Manage. J., 4(1),7–19.
Slaughter, E. S. (1998). “Models of construction innovation.” J. Constr. Eng. Manage, 226–231.
Szymberski, R. (1997). “Construction project safety planning.” TAPPI J., 80(11), 69–74.
Toole, T. M., and Gambatese, J. (2009). “The trajectories of prevention through design.” J. Saf. Res., 39(2), 225–230.
Toole, T. M., Gambatese, J. A., and Abowitz, D. A. (2017). “Owners’ role in facilitating prevention through design.” J. Prof. Issues Eng. Educ. Pract..
Trigunarsyah, B. (2007). “Project designers' role in improving constructability of Indonesian construction projects.” Constr. Manage. Econ., 25(2), 207–215.
Weinstein, M., Gambatese, J., and Hecker, S. (2005). “Can design improve construction safety? Assessing the impact of a collaborative safety-in-design process.” J. Constr. Eng. Manage., 1125–1134.
WorkCover. (2001). CHAIR: Safety in design: Tool 2001: WorkCover NSW safety in design tool, Gosford, New South Wales, Sydney.
Information & Authors
Information
Published In
Practice Periodical on Structural Design and Construction
Volume 22 • Issue 4 • November 2017
Copyright
© 2017 American Society of Civil Engineers.
History
Received: Jan 23, 2017
Accepted: May 24, 2017
Published online: Aug 22, 2017
Published in print: Nov 1, 2017
Discussion open until: Jan 22, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.