Numerical Simulation and Verification of Curtain Wall Systems under Shock Pressure
Publication: Practice Periodical on Structural Design and Construction
Volume 19, Issue 2
Abstract
When properly designed, framed, and anchored, blast-resistant laminates for curtain walls can greatly reduce or eliminate the hazard and injury from flying glass, and are capable of maintaining the integrity of a building envelope and reducing interior damage in an explosion event. Existing blast-resistant glazing research and design practice ignores the negative phase of the shock wave, which can affect the response of a curtain wall system and anchorage. Therefore, dynamic modeling and high-explosive field testing of two full-scale curtain wall systems using a shock tube are presented in this paper. The LS-DYNA numerical simulations were verified using the blast testing of two curtain wall systems, an original design and a blast-retrofitted design. The response of the glazing system to the positive and negative phases was investigated. The modeled dynamic response correlated well with the measured response of the glass laminates and the mullion supporting the curtain wall units. This study can be used to improve existing methods and to provide affordable design recommendations for curtain walls under blast.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge the financial support and technical advice provided by Mrs. Gant Miller, Kurtis Suellentrop, and Larry Frost of Winco Window Company, and the funding of the research project from the National Institute for Hometown Security.
References
Amstock, J. (1997). Glass in construction, McGraw Hill, New York.
Chung, J. H., Consolazio, G. R., Dinan, R. J., and Rinehart, S. A. (2010). “Finite-element analysis of fluid-structure interaction in a blast-resistant window system.” J. Struct. Eng., 297–306.
DeBelder, K., Pintelon, R., Demol, C., and Roose, P. (2010). “Estimation of the equivalent complex modulus of laminated glass beams and its application to sound transmission loss prediction.” Mech. Syst. Signal Process., 24(3), 809–822.
Hinman, E. (1995). “Lessons from ground zero—Oklahoma City bombing and bomb-resistant structures.” Secur. Manage. J., 39(10), 26–31.
Lafta, M. (2012). “Experimental evaluation of laminated glass interlayer under high strain rates.” M.Sc. dissertation, Univ. of Missouri, Columbia, MO.
Larcher, M. and Solomos, G. (2010). “Laminated glass loaded by air blast waves—Experiments and numerical simulations.” JCR Technical Note 57559, European Commission, Joint Research Centre (JRC), Brussels, Belgium.
Larcher, M., Solomos, G., Casade, F., and Gebbeken, N. (2012). “Experimental and numerical investigations of laminated glass subjected to blast loading.” Int. J. Impact Eng., 39(1), 42–50.
LS-DYNA V971 [Computer software]. Livermore, CA, Livermore Software Technology.
Morison, C. (2007). “The resistance of laminated glass to blast pressure loading and the coefficients for single degree of freedom analysis of laminated glass.” Ph.D. dissertation, Cranfield Univ., Bedford, U.K.
Norville, H., and Conrath, J. (2006). “Blast-resistant glazing design.” J. Archit. Eng., 129–136.
Norville, H. S., Harvill, N., Conrath, E. J., Shariat, S., and Mallonee, S. (1999). “Glass-related injuries in Oklahoma City bombing.” J. Perform. Constr. Facil., 50–56.
Norville, S., and Conrath, E. J. (2001). “Considerations for blast-resistant glazing design.” J. Archit. Eng., 80–86.
Stewart, M. G., and Netherton, M. D. (2008). “Security risks and probabilistic risk assessment of glazing subject to explosive blast loading.” Reliab. Eng. Syst. Saf., 93(4), 627–638.
Wei, J., and Dharani, L. R. (2005). “Fracture mechanics of laminated glass subject to blast loading.” Theor. Appl. Fract. Mech., 44(2), 157–167.
Wei, J., and Dharani, L. R. (2006). “Response of laminated architectural glazing subjected to blast loading.” Int. J. Impact Eng., (32), 2032–2047.
WINGARD 1.0 [Computer software]. Washington, DC, GSA.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Apr 2, 2013
Accepted: Aug 26, 2013
Published online: Aug 28, 2013
Published in print: May 1, 2014
Discussion open until: Jul 12, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.