Engineering Challenges in the Design of Alberta’s Oil Sands Projects
Publication: Practice Periodical on Structural Design and Construction
Volume 18, Issue 4
Abstract
Oil sand is found at locations around the globe, including Canada, the United States, Venezuela, and Russia. The Athabasca deposit in the Canadian province of Alberta is by far the largest and most developed site. Oil sand recovery procedures use advanced technologies developed over the past 40 years. The continuous improvements in oil sand recovery procedures have generated engineering and environmental challenges that are rarely encountered in other conventional oil and gas or petrochemical projects. The current economic climate and oil prices have boosted oil sand technology. As a result, several large-scale projects were launched within the last few years, to increase oil sand production in Alberta. The paper provides an overview of some of the engineering challenges encountered in such projects. A brief introduction is presented for the common procedures used to recover oil sand in Alberta. The author would like to share with the readers the difficulties and solutions used to resolve these challenges that are not addressed by North American codes or European codes of practice.
Get full access to this article
View all available purchase options and get full access to this article.
References
Alberta Board of Energy Resource Center. (2012). Oil sand resources, Government of Alberta, AB, Canada.
AISC. (2006). Steel construction manual, 14th Ed., Chicago.
American Iron and Steel Institute (AISI). (2007). North American specification for the design of cold-formed steel structural members, Washington, DC.
Atkinson, J. (2000). “Nonlinear soil stiffness in routine design.” Geotechnique, 50(5), 478–508.
Bedair, O. (2008). “Discussion on proposals for limit states torsional strength design of wide-flange steel members.” Can. J. Civ. Eng., 35(2), 1183–1187.
Bedair, O. (2009a). “Analysis and limit state design of stiffened plates and shells: A world view.” J. Appl. Mech. Rev., 62(2), 1–16.
Bedair, O. (2009b). “Analytical effective width equations for limit state design of thin plates under non-homogeneous in-plane loading.” Archive Appl. Mech. J., 79(12), 1173–1189.
Bedair, O. (2009c). “Stability of web plates in W-shape columns accounting for flange/web interaction.” J. Thin-Walled Struct., 47(6–7), 768–775.
Bedair, O. (2010). “Dynamic analysis of box girders with tee-stiffening using unconstrained optimization techniques.” J. Struct. Multidisc. Optimization, 42(4), 547–558.
Bedair, O. (2011a). “Cost-effective modeling strategies for spliced steel connections.” J. Appl. Math. Modelling, 35(4), 1881–1892.
Bedair, O. (2011b). “Graphical representation for stability limit state design of wide flange beam-column I-sections.” Recent Patents Eng., 5(3), 190–195.
Bedair, O. (2011c). “Stability limit state design of box sections supporting mining and process facilities.” Int. J. Struct. Eng. Mech., 39(5), 643–659.
Bedair, O. (2011d). “Stress analyses of deep plate girders used at oil and gas facilities with rectangular web penetrations.” Pract. Period. Struct. Des. Constr., 16(3), 111–120.
Bedair, O. (2012). “Interaction of multiple pipe penetrations used in mining and petrochemical facilities.” J. Thin-Walled Struct., 52, 158–164.
Beedle, L. S., ed. (1991). Stability of metal structures; A world view, 2nd Ed., Structural Stability Research Council, Rolla, MO.
Canadian Standards Association (CSA). (2004). “Design of concrete structures.” CAN/CSA-A23.3-04, Mississauga, ON, Canada.
Canadian Standards Association (CSA). (2007a). “Limit states design of steel structures.” CAN/CSA-S16-01, Mississauga, ON, Canada.
Canadian Standards Association (CSA). (2007b). “North American specification for the design of cold-formed steel structural members.” CSA-S136-07, Mississauga, ON, Canada.
Filiatrault, A., Anderson, D., and DeVall, R. (1992). “Effect of weak foundation on the seismic response of core wall type buildings.” Can. J. Civ. Eng., 19(3), 530–539.
Gaylord, E., and Gaylord, C., eds. (1996). Structural engineering handbook, McGraw Hill, New York.
Karabalis, D., and Beskos, D. (1984). “Dynamic response of 3-D rigid surface foundations by time domain boundary element method.” Earthquake Eng. Struct. Dynam., 12(1), 73–93.
National Research Council of Canada. (2005). National building code, Ottawa.
National Research Council of Canada. (2006). Alberta building code, Ottawa.
Ziemian, R. (2010). Guide to stability design criteria for metal structures, 6th Ed., Wiley, New York.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jul 14, 2012
Accepted: Jan 11, 2013
Published online: Oct 15, 2013
Published in print: Nov 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.