Flow Properties of Fresh Mud (Drilling Fluid) Used in Horizontal Directional Drilling
Publication: Journal of Pipeline Systems Engineering and Practice
Volume 12, Issue 1
Abstract
Fresh mud (uncontaminated by soil or rock cuttings) plays important roles during borehole drilling, and its rheology has been studied for years in the oil and gas drilling industry. However, mud properties in those areas of application are different from mud used during horizontal directional drilling (HDD), one of the important trenchless technologies used for pipe installation. Specialists usually follow their experience or recommendations from mud suppliers when preparing mud for HDD because few documents have discussed the rheology of fresh mud and its related properties with different recipes. This paper focuses on the rheology of fresh mud with different bentonite and soda ash contents and the effect of time on those properties. In addition, the properties of filter cake are also examined such as its thickness and hydraulic conductivities as influenced by the mud recipe, fluid pressure, and time. The work quantifies how rheological properties change with different bentonite or soda ash contents and hydration times and how filter cake thicknesses increase with increased testing time. Decreases in the hydraulic conductivity of filter cakes are also quantified for increases in mud pressure. These data could help specialists quantify the rheology of muds with a range of different bentonite and soda ash contents considering the time effect and properties of filter cakes. The information could be valuable for engineers and researchers choosing their own recipes in practice.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This research has been supported by the National Science Engineering Research Council (NSERC) through the award of a Discovery Grant and the Canada Foundation for Innovation (CFI) through Infrastructure Operating Funds.
References
Abdo, J., A. Al-Shabibi, and H. Al-Sharji. 2015. “Effects of tribological properties of water-based drilling fluids on buckling and lock-up length of coiled tubing in drilling operations.” Tribol. Int. 82 (Feb): 493–503. https://doi.org/10.1016/j.triboint.2014.01.028.
Ali, P., I. Issham, Y. Zulkefli, B. Parham, and S. I. I. Ahmad. 2012. “Impact of drilling fluid viscosity, velocity and hole inclination on cuttings transport in horizontal and highly deviated wells.” J. Pet. Explor. Prod. Technol. 2 (3): 149–156. https://doi.org/10.1007/s13202-012-0031-0.
API (American Petroleum Institute). 2016. American petroleum institute recommended practice for field testing water-based drilling fluids. API RP 13B-1. Washington, DC: API.
Ariaratnam, S. T., B. C. Harbin, and R. L. Stauber. 2007. “Modeling of annular fluid pressures in horizontal boring.” Tunnelling Underground Space Technol. 22 (5): 610–619. https://doi.org/10.1016/j.tust.2007.01.001.
Ariaratnam, S. T., and J. S. Lueke. 2002. “Post construction evaluation of the annular space region in horizontal directional drilling.” In Proc., NASTT No-Dig2002 Conf. Arlington, VA: North American Society for Trenchless Technology.
Ariaratnam, S. T., J. S. Lueke, and E. Anderson. 2004. “Reducing risks in unfavorable ground conditions during horizontal directional drilling.” Pract. Period. Struct. Des. Constr. 9 (3): 164–169. https://doi.org/10.1061/(ASCE)1084-0680(2004)9:3(164).
Ariaratnam, S. T., R. M. Stauber, J. Bell, B. Harbin, and F. Canon. 2003. “Predicting and controlling hydraulic fracturing during horizontal directional drilling.” In Proc. ASCE Int. Conf. Pipeline Engineering and Construction: New Pipeline Technologies, Security, and Safety, 1334–1345. Reston, VA: ASCE. https://ascelibrary.org/doi/10.1061/40690%282003%29145.
Browning, W. C. 1955. “Flow properties of suspensions in drilling mud design.” In Proc., Fall Meeting of the Petroleum Branch of AIME. New Orleans: Society of Petroleum Engineers.
Caenn, R., H. C. Darley, and G. R. Gray. 2011. Composition and properties of drilling and completion fluids. Houston: Gulf Professional Publishing.
Darley, H. C. H. 1957. “A test for degree of dispersion in drilling muds.” J. Pet. Technol. 210 (1): 93–96.
Frey, E., and G. Lagaly. 1979. “Selective coagulation in mixed colloidal suspensions.” J. Colloid Interface Sci. 70 (1): 46–55. https://doi.org/10.1016/0021-9797(79)90006-7.
Huang, W., Y. K. Leong, T. Chen, P. I. Au, X. Liu, and Z. Qiu. 2016. “Surface chemistry and rheological properties of API bentonite drilling fluid: pH effect, yield stress, zeta potential and ageing behavior.” J. Pet. Sci. Eng. 146 (Oct): 561–569. https://doi.org/10.1016/j.petrol.2016.07.016.
Kelessidis, V. C., and R. Maglione. 2008. “Yield stress of water–bentonite dispersions.” Colloids Surf., A 318 (1): 217–226. https://doi.org/10.1016/j.colsurfa.2007.12.050.
Kennedy, M. J., G. D. Skinner, and I. D. Moore. 2004. “Elastic calculations of limiting mud pressures to control hydro-fracturing during HDD.” In Proc., No-Dig 2004. Cleveland: North America Society for Trenchless Technology.
Lagaly, G. 1986. “Interaction of alkylamines with different types of layered compounds.” Solid State Ionics 22 (1): 43–51. https://doi.org/10.1016/0167-2738(86)90057-3.
Lan, H. 2018. “Experimental and numerical investigation of stability of horizontal boreholes during horizontal directional drilling.” Ph.D. thesis, Dept. of Civil Engineering, Queen’s Univ.
Lan, H., and I. D. Moore. 2020. “Experimental investigation examining influence of burial depth on stability of horizontal boreholes in sand.” J. Geotech. Geoenviron. Eng. 146 (5): 04020013. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002222.
Ma, B., and M. Najafi. 2008. “Development and applications of trenchless technology in China.” Tunnelling Underground Space Technol. 23 (4): 476–480. https://doi.org/10.1016/j.tust.2007.08.003.
Nakayama, F. S. 1970. “Hydrolysis of sodium carbonate.” J. Chem. Educ. 47 (1): 67–68. https://doi.org/10.1021/ed047p67.
Norrish, K. 1954. “The swelling of montmorillonite.” Spec. Discuss. Faraday Soc. 18: 120–134. https://doi.org/10.1039/df9541800120.
Ohshima, H. 1974. “Diffuse double layer interaction between two parallel plates with constant surface charge density in an electrolyte solution.” Colloid Polym. Sci. 252 (3): 257–267. https://doi.org/10.1007/BF01638107.
Ohshima, H., and T. Kondo. 1987. “Electrophoretic mobility and Donnan potential of a large colloidal particle with a surface charge layer.” J. Colloid Interface Sci. 116 (2): 305–311.
Olphen, H. V. 1977. An introduction to clay colloid chemistry, for clay technologists, geologists, and soil scientists. 2nd ed. New York: Wiley.
Rand, B., and I. E. Melton. 1977. “Particle interactions in aqueous kaolinite suspensions. I: Effect of pH and electrolyte upon the mode of particle interaction in homoionic sodium kaolinite suspensions.” J. Colloid Interface Sci. 60 (2): 308–320. https://doi.org/10.1016/0021-9797(77)90290-9.
Savins, J. G., and W. F. Roper. 1954. “A direct-indicating viscometer for drilling fluids.” In Drilling and production practice, 7–22. Washington, DC: American Petroleum Institute.
Shu, B., B. Ma, and H. Lan. 2014. “Cuttings transport mechanism in a large-diameter HDD borehole.” J. Pipeline Syst. Eng. Pract. 6 (4): 04014017. https://doi.org/10.1061/(ASCE)PS.1949-1204.0000190.
Shu, B., S. Zhang, and M. Liang. 2018. “Estimation of the maximum allowable drilling mud pressure for a horizontal directional drilling borehole in fractured rock mass.” Tunnelling Underground Space Technol. 72: 64–72. https://doi.org/10.1016/j.tust.2017.11.016.
Stern, O. 1924. “Theory of a double-electric layer with the consideration of the adsorption processes.” Z. Electrochem. 30: 508–516.
Usui, S. 1973. “Interaction of electrical double layers at constant surface charge.” J. Colloid Interface Sci. 44 (1): 107–113. https://doi.org/10.1016/0021-9797(73)90197-5.
Von Engelhardt, W., and E. Schindewolf. 1952. “The filtration of clay suspensions.” Kolloid Z. 127: 150–164.
Yan, X., B. Ma, C. Zeng, and Y. Liu. 2016. “Analysis of formation fracturing for the Maxi-HDD Qin River crossing project in China.” Tunnelling Underground Space Technol. 53 (3): 1–12. https://doi.org/10.1016/j.tust.2015.11.018.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Apr 8, 2020
Accepted: Aug 17, 2020
Published online: Oct 31, 2020
Published in print: Feb 1, 2021
Discussion open until: Mar 31, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.