Dynamic Analysis and Parameter Optimization of Pipelines with Multidimensional Vibration Isolation and Mitigation Device
Publication: Journal of Pipeline Systems Engineering and Practice
Volume 12, Issue 1
Abstract
Pipelines are widely used as an economical transmission mode in petroleum transportation, ocean engineering, aerospace engineering, and nuclear industry. However, pipelines are potentially susceptible to vibration in horizontal and vertical directions under external excitation, which leads to a significant reduction in the service life of pipelines, or even the damage of pipelines. In this paper, a novel multidimensional vibration isolation and mitigation device (MVIMD) is proposed and optimized to mitigate the multidimensional vibration of pipelines. First, the dynamic characteristics and responses of pipelines with and without the devices are compared based on the modified equivalent standard solid model. Then the MVIMD is attached to a pipeline to verify its vibration mitigation effect in horizontal and vertical directions. Finally, the genetic algorithm (GA) is adopted to optimize the parameters of MVIMD. The numerical analysis results show that the novel MVIMD with parameters optimized by the genetic algorithm has better effects for controlling both horizontal and vertical vibration responses of pipelines.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
This study was financially supported by the Program of Chang Jiang Scholars of Ministry of Education, National Science Fund for Distinguished Young Scholars with Grant No. 51625803, National Key Research and Development Plans with Grant Nos. 2016YEF0200500 and 2016YFE0119700, and the Priority Academic Program Development of Jiangsu Higher Education Institutions.
References
Ahmed, Z. H. 2015. “An improved genetic algorithm using adaptive mutation operator for the quadratic assignment problem.” In Proc., 38th Int. Conf. on Telecommunications and Signal Processing (TSP), 1–5. New York: IEEE.
Azzi, A., S. Belaadi, and L. Friedel. 2000. “Two-phase gas/liquid flow pressure loss in bends.” Forsch. Ingenieurwes. 65 (7): 309–318. https://doi.org/10.1007/BF03035112.
Bi, K., and H. Hao. 2016. “Numerical simulation on the effectiveness of using viscoelastic materials to mitigate seismic induced vibrations of above-ground pipelines.” Eng. Struct. 123 (Sep): 1–14. https://doi.org/10.1016/j.engstruct.2016.05.022.
Budny, D. D., F. J. Hatfield, and D. C. Wiggert. 1990. “An experimental study on the influence of structural damping on internal fluid pressure during a transient flow.” J. Pressure Vessel Technol. 112 (3): 284–290. https://doi.org/10.1115/1.2928627.
Cai, J. Q., K. B. Zhu, Q. Ding, G. C. Ying, and H. G. Li. 2006. “High precision of tube modal analysis considering of tube bending effect.” Noise Vib. Control 26 (3): 44–46.
Carruth, A. L., and M. E. Cerkovnik. 2007. Jumper VIV—New issues for new frontiers. Mountain View, CA: International Society of Offshore and Polar Engineers.
Chiba, T., and H. Kobayashi. 1990. “Response characteristics of piping system supported by viscoelastic and elastoplastic dampers.” J. Press Vessel Technol. 112 (1): 34–38. https://doi.org/10.1115/1.2928583.
Darwin, D. 1859. On the origin of species by means of natural selection. London: John Murray.
De Jong, K. A. 1975. “An analysis of the behavior of a class of genetic adaptive systems.” Ph.D. thesis, Dept. of Computer and Communication Sciences, Univ. of Michigan.
Golberg, D. E. 1989. Genetic algorithms in search, optimization, and machine learning. New York: Addion-Wesley.
Hansson, P. A., and G. Sandberg. 2001. “Dynamic finite element analysis of fluid-filled pipes.” Comput. Methods Appl. Mech. Eng. 190 (24–25): 3111–3120. https://doi.org/10.1016/S0045-7825(00)00384-4.
Holland, J. H. 1975. Adaptation in natural and artificial system. Ann Arbor, MI: University of Michigan Press.
Iakovlev, S. 2018. “Structural analysis of a submerged cylindrical shell subjected to two consecutive spherical shock waves.” Fluid Struct. 76 (Jan): 506–526. https://doi.org/10.1016/j.jfluidstructs.2017.10.015.
ISO. 1991. Plain end steel tubes, welded and seamless -General tables of dimensions and masses per unit length. ISO 4200. Geneva: ISO.
Josef, B., and H. L. Zhang. 1980. “Attenuate airflow pulsation with perforated tubes.” Compressor Technol. 2 (3): 46–51.
Koetaka, Y., P. Chusilp, Z. Zhang, M. Ando, K. Suita, K. Inoue, and N. Uno. 2005. “Mechanical property of beam-to-column moment connection with hysteretic dampers for column weak axis.” Eng. Struct. 27 (1): 109–117. https://doi.org/10.1016/j.engstruct.2004.09.002.
Lee, U., C. H. Pak, and S. C. Hong. 1995. “The dynamics of a piping system with internal unsteady flow.” J. Sound Vib. 180 (2): 297–311. https://doi.org/10.1006/jsvi.1995.0080.
Lesmez, M. W., D. C. Wiggert, and F. J. Hatifeid. 1990. “Modal analysis of vibrations in liquid-flled piping-systems.” J. Fluids Eng. 112 (6): 311–318. https://doi.org/10.1115/1.2909406.
Mason, W. P. 1946. Electromechanical transducers and wave filters, 21–56. New York: Van Nostrand.
Matsuoka, T., K. Ohmata, and Z. Miyagi. 2002. “Vibration control of a piping system supported by a viscoelastic-friction damper using a lever-type displacement magnifying mechanism.” In Proc., Dynamics and Design Conf. Tokyo: The Japan Society of Mechanical Engineers.
Najafzadeh, M. 2015. “Neuro-fuzzy GMDH systems based evolutionary algorithms to predict scour pile groups in clear water conditions.” Ocean Eng. 99 (May): 85–94. https://doi.org/10.1016/j.oceaneng.2015.01.014.
Najafzadeh, M., M. F. Saberi, and S. Sarkamaryan. 2018. “NF-GMDH-based self-organized systems to predict bridge pier scour depth under debris flow effects.” Mar. Georesour. Geotechnol. 36 (5): 589–602. https://doi.org/10.1080/1064119X.2017.1355944.
Olson, L. G., and D. Jamison. 1997. “Application of a general purpose finite element method to elastic pipes conveying fluid.” J. Fluids Struct. 11 (2): 207–222. https://doi.org/10.1006/jfls.1996.0073.
Otani, A., H. Kobayashi, N. Kobayashi, and Y. Tadaishi. 1994. “Performance of a viscous damper using electrorheological fluid.” In Proc., 1994 ASME Pressure Vessel and Piping Conf. New York: ASME.
Perotti, L. E., R. Deiterding, K. Inaba, J. Shepherd, and M. Ortiz. 2013. “Elastic response of water-filled fiber composite tubes under shock wave loading.” Int. J. Solids Struct. 50 (3–4): 473–486. https://doi.org/10.1016/j.ijsolstr.2012.10.015.
Ren, J. T., and J. S. Jiang. 2003. “Advances and trends on vibration of pipes conveying fluid.” Adv. Mech. 33 (3): 313–324.
Song, G. B., P. Zhang, L. Y. Li, M. Singla, D. Patil, H. N. Li, and Y. L. Mo. 2016. “Vibration control of a pipeline structure using pounding tuned mass damper.” J. Eng. Mech. 142 (6): 04016031. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001078.
Sun, S. Y., Y. Y. Xia, and J. L. Li. 1980. “Effect of buffer position on airflow pulsation in the pipeline.” Frictionless Compressor Technol. J. 2 (4): 33–36.
Svingen, B. 1994. “A frequency domain solution of the coupled hydromechanical vibrations in piping systems by the finite element method.” In Proc., 17th IAHR Symp. on Hydraulic Machinery and Cavitalion, 1259–1269. Madrid, Spain: International Association for Hydro-Environment Engineering and Research.
Svingen, B., and M. Kjeldsen. 1995. “Fluid structure interaction in piping systems.” In Proc., Int Conf. on Finite Elements in Fluids—New Trends and Applications, 955–963. Beijing: International Association for Hydro-Environment Engineering and Research.
Valentin, R. A., J. W. Phillips, and J. S. Walker. 1979. Reflection and transmission of fluid transients at an elbow. Argonne, IL: Argonne National Lab.
Walker, J. S., and J. W. Phillips. 1977. “Pulse propagation in fluid-filled tubes.” J. Appl. Mech. 44 (1): 31–35. https://doi.org/10.1115/1.3424009.
Wang, T., F. Wang, and G. L. Hou. 2014. “Shaking table tests on base-isolated nuclear.” Eng. Mech. 38 (10): 62–68. https://doi.org/10.3901/JME.2002.10.062.
Wiggert, D. C., F. J. Hatfield, and S. Stuckenbruck. 1987. “Analysis of liquid and structural transients in piping by the method of characteristics.” J. Fluids Eng. 109 (2): 161–165. https://doi.org/10.1115/1.3242638.
Wiggert, D. C., R. S. Otwell, and F. J. Hatfield. 1985. “The effect of elbow restraint on pressure transients.” J. Fluids Eng. 107 (3): 402. https://doi.org/10.1115/1.3242500.
Xu, Z. D., T. Ge, and J. Liu. 2020. “Experimental and theoretical study of high-energy dissipation-viscoelastic dampers based on acrylate-rubber matrix.” J. Eng. Mech. 146 (6): 04020057. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001802.
Xu, Z. D., X. H. Huang, and L. H. Lu. 2012a. “Experimental study on horizontal performance of multi-dimensional earthquake isolation and mitigation devices for long-span reticulated structures.” J. Vib. Control 18 (7): 941–952. https://doi.org/10.1177/1077546311418868.
Xu, Z. D., Q. Tu, and Y. F. Guo. 2012b. “Experimental study on vertical performance of multidimensional earthquake isolation and mitigation devices for long-span reticulated structures.” J. Vib. Control 18 (13): 1971–1985. https://doi.org/10.1177/1077546311429338.
Xu, Z. D., Z. Zhou, H. T. Zhao, and Y. P. Shen. 2001. “A new model on viscoelastic damper.” Eng. Mech. 18 (6): 88–93.
Xu, Z.-D., T. Ge, and A. Miao. 2019. “Experimental and theoretical study on a novel multi-dimensional vibration isolation and mitigation device for large-scale pipeline structure.” Mech. Syst. Sig. Process. 129 (8): 546–567. https://doi.org/10.1016/j.ymssp.2019.04.054.
Zhang, B. K., L. D. He, and X. F. Yang. 2015. “Pipeline vibration control with a cantilever type tuned mass damper.” J. Beijing Univ. Chem. Technol. (Nat. Sci. Ed.) 42 (2): 89–94.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Jan 21, 2019
Accepted: Jun 23, 2020
Published online: Sep 20, 2020
Published in print: Feb 1, 2021
Discussion open until: Feb 20, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.