Polymeric Coatings Based on LDPE and Taurit: Preparation, Structure, and Mechanical Properties
Publication: Journal of Pipeline Systems Engineering and Practice
Volume 11, Issue 1
Abstract
The article describes a preparation method and performance behavior of polymer composite systems with a matrix of low-density polyethylene (LDPE) and a reinforcing agent of Taurit. Taurit (a kind of shungite) is an inexpensive, well-available, and environmentally friendly mineral that is compatible with many polymers. The composites have been prepared via extrusion blending, and their mechanical and protective properties have been studied. The performance of Taurit-containing materials has been compared with properties of composites with other commonly used fillers (e.g., carbon black, talc, aluminum oxide, and asbestos fibers), and Taurit has proved to be the most efficient reinforcement in this series. The results indicate that the obtained composites can be used as coatings of pipelines to protect them from corrosion and mechanical damage.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
No data, models, or code were generated or used during the study.
Acknowledgments
We are grateful to the team of the LLP Neftekhimstroy-YUG and to those working in the Regional Laboratory of Constructional and Biochemical Materials at the M. Auezov South Kazakhstan State University for research assistance.
References
Bazhenov, S. 1995. “Fillers: Their effect on the failure modes of plastics.” Polym. Eng. Sci. 35 (10): 813–822. https://doi.org/10.1002/pen.760351004.
Bazhenov, S., J. X. Li, A. Hiltner, and E. Baer. 1994. “Ductility of filled polymers.” J. Appl. Polym. Sci. 52 (2): 243–254. https://doi.org/10.1002/app.1994.070520211.
Brzezinski, B., J. Olejnik, and S. Paszyc. 1990. “Fourier transform infrared study on the identification of gossypol tautomers.” J. Mol. Struct. 239 (Oct): 23–31. https://doi.org/10.1016/0022-2860(90)80199-T.
Buseck, P. R., L. P. Galdobina, V. V. Kovalevski, N. N. Rozhkova, J. W. Valley, and A. Z. Zaidenberg. 1997. “Shungites: The C-rich rocks of Karelia, Russia.” Can. Mineral. 35 (6): 1363–1378.
Bykov, L. I., F. M. Mustafin, S. K. Rafikov, A. M. Nechval, and A. E. Lavrentiev. 2007. Protection of pipelines against corrosion: Textbook, 708. Saint Petersburg, Russia: “Nedra” LLC.
Garishin, O. K., V. A. Gerasin, and M. A. Guseva. 2011. “A study of the elasto-plastic properties of polymer–silicate nanocomposites with allowance for the change in their volumes during deformation.” Polym. Sci. Ser. A 53 (12): 1187–1197. https://doi.org/10.1134/S0965545X11120042.
Gdaniec, M., B. T. Ibragimov, and S. A. Talipov. 1996. Vol. 6 of Gossypol, comprehensive supramolecular chemistry, 117–145. New York: Elsevier.
Guermazi, N., K. Elleuch, H. F. Ayedi, and P. Kapsa. 2008. “Aging effect on thermal, mechanical and tribological behaviour of polymeric coatings used for pipeline application.” J. Mater. Process. Technol. 203 (1): 404–410. https://doi.org/10.1016/j.jmatprotec.2007.10.062.
Guidetti, G. P., G. L. Rigosi, and R. Marzola. 1996. “The use of polypropylene in pipeline coatings.” Prog. Org. Coat. 27 (1–4): 79–85. https://doi.org/10.1016/0300-9440(95)00523-4.
Guseva, M. A., V. A. Gerasin, and B. F. Shklyaruk. 2016. “Tensile behavior of polyolefin composites: The effect of matrix parameters.” J. Appl. Polym. Sci. 133 (34). https://doi.org/10.1002/app.43819.
Howell, G. R., and Y. F. Cheng. 2007. “Characterization of high performance composite coating for the northern pipeline application.” Prog. Org. Coat. 60 (2): 148–152. https://doi.org/10.1016/j.porgcoat.2007.07.013.
Kalinin, Y. K. 1984. Shungites—New carbonaceous materials, 250. Petrozavodsk, Russia: Karelia.
Kenar, J. A. 2006. “Reaction chemistry of gossypol and its derivatives.” J. Am. Oil Chem. Soc. 83 (4): 269–302. https://doi.org/10.1007/s11746-006-1203-1.
Kurenkov, V. V., V. A. Gerasin, Y. M. Korolev, A. A. Piryazev, D. I. Mendeleev, and S. V. Diyachuk. 2015. “Polymer-aluminosilicate nanocomposite materials for corrosion protection of main pipelines.” [In Russian.] J. Plast. 7–8: 53–60.
Kyzioł, K., J. Oczkowska, D. Kottfer, M. Klich, Ł. Kaczmarek, A. Kyzioł, and Z. Grzesik. 2018. “Physicochemical and biological activity analysis of low-density polyethylene substrate modified by multi-layer coatings based on DLC structures, obtained using RF CVD method.” Coatings 8 (4): 135. https://doi.org/10.3390/coatings8040135.
Landel, R. F., and L. E. Nielsen. 1993. Mechanical properties of polymers and composites. Boca Raton, FL: CRC Press.
Mobin, M., A. U. Malik, I. N. Andijani, F. Al-Muaili, M. Al-Hajri, G. Ozair, and N. M. K. Mohammad. 2008. “Performance evaluation of some fusion-bonded epoxy coatings under water transmission line conditions.” Prog. Org. Coat. 62 (4): 369–375. https://doi.org/10.1016/j.porgcoat.2008.02.002.
Musina, U. S., and V. V. Samonin. 2013. “Carbon-mineral composition of shungite Koksu fields of Kazakhstan.” In Vol. 19 of Proc., St. Petersburg Mathematical Society, 39–41. St. Petersburg, Russia: St. Petersburg State Univ.
Nadirov, K. S., M. K. Zhantasov, G. Z. Bimbetova, Z. K. Nadirova, and T. S. Bazhirov. 2015. “The choice of method of stabilization of polyethylene. Challenges and innovations of modern society.” In Proc., 7th Scientific-Practical Conf. with Int. Participation, 341–345. Astrakhan, Russia: Astrakhan State Univ.
Nadirov, K. S., M. K. Zhantasov, B. A. Sakybayev, A. K. Orynbasarov, G. Z. Bimbetova, A. S. Sadyrbayeva, and A. M. Tuleuov. 2017. “The study of the gossypol resin impact on adhesive properties of the intermediate layer of the pipeline three-layer rust protection coating.” Int. J. Adhes. Adhes. 78 (Oct): 195–199. https://doi.org/10.1016/j.ijadhadh.2017.07.001.
Pandiyaraj, K. N., R. R. Deshmukh, I. Ruzybayev, S. I. Shah, P. G. Su, J. Mercy Halleluyah, and A. S. Halim. 2014. “Influence of non-thermal plasma forming gases on improvement of surface properties of low density polyethylene (LDPE).” Appl. Surf. Sci. 307 (Jul): 109–119. https://doi.org/10.1016/j.apsusc.2014.03.177.
Rafienko, V. A. 2008. Technology of shungite, 214. Moscow: GEOS.
Rozhkova, N. N. 2001. “Shungite—A carbon-mineral filler for polymeric composite materials.” Compos. Interfaces 8 (3–4): 307–312. https://doi.org/10.1163/15685540152594767.
Samimi, A., S. Dokhani, N. Neshat, B. Almasinia, and M. Setoudeh. 2012. “The application and new mechanism of universal produce the 3-layer polyethylene coating.” Int. J. Adv. Sci. Tech. Res., India 2 (4): 465–473.
Samimi, A., and S. Zarinabadi. 2011. “An analysis of polyethylene coating corrosion in oil and gas pipelines.” J. Am. Sci. 7 (1): 1032–1036.
Samimi, A., and S. Zarinabadi. 2012. “Application polyurethane as coating in oil and gas pipelines.” Int. J. Sci. Eng. Invest., Fr. 1 (8): 43–45.
Shagiakhmetov, A., D. Tananykhin, and A. Terleev. 2018. “Development of water-shutoff composition on the basis of carboxymethyl cellulose for fractured and fractured-porous oil and gas reservoirs.” Acta Tech. CSAV (Ceskoslovensk Akad. Ved) 63 (3): 475–480.
Tananykhin, D., and R. Khusainov. 2016. “Diffusion of nonionic surfactants diffusion from aqueous solutions into viscous oil.” Pet. Sci. Technol. 34 (24): 1984–1988. https://doi.org/10.1080/10916466.2016.1233245.
Tananykhin, D. S., and A. M. Shagiakhmetov. 2016. “Justification of technology and fluids for treatment of the unconsolidated carbonate reservoirs.” Int. J. Appl. Eng. Res. 11 (1): 744–748.
Xanthos, M. 2012. Functional fillers for plastics. New York: Wiley.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Feb 28, 2019
Accepted: May 29, 2019
Published online: Oct 31, 2019
Published in print: Feb 1, 2020
Discussion open until: Mar 31, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.