Use of BFRP Wrap for Rehabilitation of Pipeline in Bending with Various Corrosion Depths
Publication: Journal of Pipeline Systems Engineering and Practice
Volume 11, Issue 1
Abstract
The feasibility and effectiveness of basalt fiber reinforced polymer (BFRP) wrap in the rehabilitation of corroded pipes under bending and internal pressure was investigated by using experimental tests and numerical analyses. The experimental program consisted of eight pipe specimens with diameter-to-thickness ratio (D/t) of 34.5 tested under four-point bending and internal pressure. Corrosion defects were simulated on specimens by reducing the wall thickness. The corroded specimens were repaired by using BFRP-composite wrap. The numerical modeling, conducted by using a commercially available program, studied the effect of the fiber orientation of BFRP wrap and the number of layers of BFRP wrap. The results indicated that increasing the amount of BFRP layers can successfully increase the bending capacity of the pipe, and there is an optimum thickness of BFRP fabric. When the findings of this study were compared to the current guidelines, it was found that this standard does not take the ovalization effect of in-plane bending into consideration.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research work was completed with the financial assistance received from Natural Sciences and Engineering Research Council of Canada (NSERC), located in Ottawa, Canada.
References
AEA Technology Consulting. 2001. Temporary/permanent pipe repair: Guidelines. Abingdon, UK: AEA Technology Consulting.
API (American Petroleum Institute). 2013. Specification for line pipe. Washington, DC: API.
ASME. 2015. Repair of pressure equipment and piping. ASME PCC-2. New York: ASME.
ASTM. 2015. Standard test method for compressive properties of rigid plastics. ASTM D695/D695. West Conshohocken, PA: ASTM.
ASTM. 2017. Standard test method for tensile properties of polymer matrix composite materials. ASTM D3039/D3039M. West Conshohocken, PA: ASTM.
Canadian Standard Association (CSA). 2016. Oil and gas pipeline systems. CSA Z662-15. Toronto: CSA.
Chan, P., K. Tshai, M. Johnson, H. Choo, S. Li, and K. Zakaria. 2014. “Burst strength of carbon fibre reinforced polyethylene strip pipeline repair system: A numerical and experimental approach.” J. Compos. Mater. 49 (6): 749–56. https://doi.org/10.1177/0021998314525652.
Duic, J., S. Kenno, and S. Das. 2018. “Flexural rehabilitation and strengthening of concrete beams with BFRP composite.” J. Compos. Constr. 22 (4): 04018016. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000851.
Elchalakani, M. 2016. “Rehabilitation of corroded steel CHS under combined bending and bearing using CFRP.” J. Constr. Steel Res. 125 (Oct): 26–42. https://doi.org/10.1016/j.jcsr.2016.06.008.
Elgabbas, F., E. A. Ahmed, and B. Benmokrane. 2015. “Physical and mechanical characteristics of new basalt-FRP bars for reinforcing concrete structures.” Constr. Build. Mater. 95 (Oct): 623–635. https://doi.org/10.1016/j.conbuildmat.2015.07.036.
EPA. 2006. “Composite wrap for non-leaking pipeline defects.” Accessed September 10, 2018. www.epa.gov/sites/production/files/2016-06/documents/ll_compwrap.pdf.
Hashin, Z. 1980. “Failure criteria for unidirectional fibre composites.” J. Appl. Mech. 47 (2): 329–334. https://doi.org/10.1115/1.3153664.
Hashin, Z., and A. Rotem. 1973. “A fatigue failure criterion for fiber-reinforced materials.” J. Compos. Mater. 7 (4): 448–464. https://doi.org/10.1177/002199837300700404.
Koch, G. H., M. P. Brongers, N. G. Thompson, Y. P. Virmani, and J. H. Payer. 2002. Corrosion costs and preventive strategies in the United States. McLen, VA: Federal Highway Administration.
Lim, K. S., S. N. A. Azraai, N. M. Noor, and N. Yahaya. 2016. “An overview of corroded pipe repair techniques using composite materials.” Int. J. Mater. Metall. Eng. 10 (1): 19–25.
Limam, A., L. H. Lee, E. Corona, and S. Kyriakides. 2010. “Inelastic wrinkling and collapse of tubes under combined bending and internal pressure.” Int. J. Mech. Sci. 52 (5): 637–647. https://doi.org/10.1016/j.ijmecsci.2009.06.008.
Prabhu, S. 2016. “Corrosion prevention for buried pipelines.” Accessed September 10, 2018. www.corrosionpedia.com/2/2652/corrosion-prevention/corrosion-prevention-for-buried-pipelines.
Rohem, N. R. F., L. J. Pacheco, S. Budhe, M. D. Banea, E. M. Sampaio, and S. De Barros. 2016. “Development and qualification of a new polymeric matrix laminated composite for pipe repair.” Compos. Struct. 152 (Sep): 737–745. https://doi.org/10.1016/j.compstruct.2016.05.091.
Ross, A. 2006. “Basalt fibers: Alternative to glass?” Accessed September 10, 2018. https://www.compositesworld.com/articles/basalt-fibers-alternative-to-glass.
Shouman, A., and F. Taheri. 2009. “An investigation into the behaviour of composite repaired.” In ASME 2009 28th Int. Conf. on Ocean, Offshore and Arctic Engineering, 111–118. New York: ASME.
Toutanji, H., and S. Dempsey. 2001. “Stress modeling of pipelines strengthened with advanced composites materials.” Thin Walled Struct. 39 (2): 153–165. https://doi.org/10.1016/S0263-8231(00)00049-5.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Sep 24, 2018
Accepted: Apr 2, 2019
Published online: Sep 18, 2019
Published in print: Feb 1, 2020
Discussion open until: Feb 18, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.