Localizing Pipe Wall Features Using Acoustic Wave Propagation in Water Bar Inside of Pipe
Publication: Journal of Pipeline Systems Engineering and Practice
Volume 10, Issue 4
Abstract
Acoustic wave propagation has been widely applied for the detection of anomalies in buried pipelines. Anomalies such as joints, damages, and defects in a pipe change the stiffness of the pipe, and investigating the interaction of the acoustic wave with these pipe features is a reputable approach to detect and locate them. Acoustic wave propagation–based nondestructive evaluation (NDE) through integrated actuators and sensors has been used extensively for condition assessment of different types of pipes in the last decade. This study illustrates the effects of the presence of joints on acoustic wave propagation inside the fluid bar in a buried pipe. Presence of the joint increases the local thickness and consequently the speed of the acoustic wave in the fluid bar. To identify joints, acoustic wave propagation was studied when a wave passes through a joint. Finite-element (FE) software was used to carry out simulations, and obtained results showed a good agreement with field data. A 93% increase in accuracy of localizing joints was achieved.
Get full access to this article
View all available purchase options and get full access to this article.
References
Breon, L. J. 2016. “Ultrasonic guided wave propagation in pipes with elbows.” Ph.D. thesis, Pennsylvania State Univ.
Graf, T. 2014. “Acoustic wave propagation in water filled buried plastic pipes. In Proc., COMSOL Conf. Cambridge, UK.
Gresil, M., A. Poohsai, and N. Chandarana. 2017. “Guided wave propagation and damage detection in composite pipes using piezoelectric sensors.” Procedia Eng. 188 (Jan): 148. https://doi.org/10.1016/j.proeng.2017.04.468.
Howard, R., and F. Cegla. 2017. “Detectability of corrosion damage with circumferential guided waves in reflection and transmission.” NDT E Int. 91 (Apr): 108–119. https://doi.org/10.1016/j.ndteint.2017.07.004.
Khalili, A., A. Alavinasab, M. Kennedy, and C. White. 2018. “Investigation of acoustic wave propagation and attenuation in a damaged buried pipe.” In Proc., Pipelines, 259–268. Reston, VA: ASCE.
Khalili, A., A. Alavinasab, M. Kennedy, and C. White. 2019. “Does acoustic wave propagation detect damage in large diameter cast iron?” In Proc., Pipelines 2019: Multidisciplinary Topics, Utility Engineering, 253–262. Reston, VA: ASCE.
Khalili, A., R. Jha, and D. Samaratunga. 2016. “Spectrally formulated user-defined element in conventional finite element environment for wave motion analysis in 2-D composite structures.” Eur. J. Comput. Mech. 25 (6): 446–474. https://doi.org/10.1080/17797179.2016.1253364.
Khalili, A., R. Jha, and D. Samaratunga. 2017. “The wavelet spectral finite element-based user-defined element in Abaqus for wave propagation in one-dimensional composite structures.” Simul.: Trans. Soc. Model. Simul. Int. 93 (5): 397–408. https://doi.org/10.1177/0037549716687377.
Kondis, A. 2005. “Acoustical wave propagation in buried water filled pipes.” M.Sc. thesis, Dept. of Civil and Environmental Engineering, Massachusetts Institute of Technology Whittle.
Kong, X., V. Nguyen, and R. Mascarenhas. 2011. “Recent advances in pipe wall assessment technology.” In Proc., Pipelines, 714–724. Reston, VA: ASCE.
Long, R., P. Cawley, and M. Lowe. 2003a. “Acoustic wave propagation in buried iron water pipes.” Proc. Roy. Soc. London. Ser. A: Math. Phys. Eng. Sci. 459 (2039): 2749–2770. https://doi.org/10.1098/rspa.2003.1148.
Long, R., M. Lowe, and P. Cawley. 2003b. “Attenuation characteristics of the fundamental modes that propagate in buried iron water pipes.” Ultrasonics 41 (7): 509–519. https://doi.org/10.1016/S0041-624X(03)00166-5.
Morse, P. M. 1939. “Some aspects of the theory of room acoustics.” J. Acoust. Soc. Am. 11 (1): 205. https://doi.org/10.1121/1.1916007.
Paulson, P., and V. Nguyen. 2010. “Pipe wall evaluation using acoustic pulses.” In Proc., Pipelines, 711–718. Reston, VA: ASCE.
Pavić, G. 2006. “Experimental identification of physical parameters of fluid-filled pipes using acoustical signal processing.” Appl. Acoust. 67 (9): 864–881. https://doi.org/10.1016/j.apacoust.2006.01.002.
Plona, T. J., B. K. Sinha, S. Kostek, and S. K. Chang. 1992. “Axisymmetric wave propagation in fluid-loaded cylindrical shells: Theory versus experiment.” J. Acoust. Soc. Am. 92 (2): 1144–1155. https://doi.org/10.1121/1.404040.
Sinha, B. K., T. J. Plona, S. Kostek, and S. K. Chang. 1992. “Axisymmetric wave propagation in fluid-loaded cylindrical shells. I: Theory.” J. Acoust. Soc. Am. 92 (2): 1132. https://doi.org/10.1121/1.404040.
Stroebele, A., T. Wagner, and P. O. Paulson. 2015. “Developing an inline pipe wall screening tool for assessing and managing metallic pipe.” In Proc., Pipelines, 900–910. Reston, VA: ASCE.
Thomson, J., and L. Wang. 2009. State of technology review report on condition assessment of ferrous water transmission and distribution systems. Washington, DC: EPA.
Wöckel, S., U. Steinmann, and H. Arndt. 2015. “Low frequency guided wave transmission in water pipe systems.” Proc. Eng. 120: 1257–1260. https://doi.org/10.1016/j.proeng.2015.08.843.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Aug 22, 2018
Accepted: Mar 18, 2019
Published online: Aug 26, 2019
Published in print: Nov 1, 2019
Discussion open until: Jan 26, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.