Exploring the Design Space Governing the Lateral Buckle Capacity of Subsea Pipelines
Publication: Journal of Pipeline Systems Engineering and Practice
Volume 10, Issue 1
Abstract
Three analytical methods are used to evaluate the lateral buckle capacity of perfectly straight pipelines supported by a seafloor foundation: the beam-on-elastic-foundation method, the Kerr thermal buckling method, and the Rayleigh-Ritz method. These analytical methods and a numerical finite element method including the pipeline out-of-straightness characteristics are used to investigate the design space for pipeline buckling through deterministic and Monte Carlo investigations of a typical condition. A regression model is fitted to finite element results and then used to predict responses for other general conditions. Characteristics of observed pipeline out-of-straightness are described and their influence on its buckle capacity is examined. Bounds to the expected pipeline buckle capacity may be established using the four analysis methods.
Get full access to this article
View all available purchase options and get full access to this article.
References
Bathe, K.-J. 1982. Finite element procedures in engineering analyses. Englewood Cliffs, NJ: Prentice-Hall.
Bazant, Z. P., and L. Cedolin. 1991. Stability of structures: Elastic, inelastic, fracture and damage theories. New York: Oxford University Press.
Bjorhovde, R. 1972. “Deterministic and probabilistic approaches to the strength of steel columns.” Ph.D. dissertation, Dept. of Civil and Environmental Engineering, Lehigh Univ.
Chatterjee, S., D. J. White, and M. F. Randolph. 2012. “Numerical simulations of pipe-soil interaction during large lateral movements on clay.” Géotechnique 62 (8): 693–705. https://doi.org/10.1680/geot.10.P.107.
Chen, W. F., and D. J. Han. 1985. Tubular members in offshore structures. Boston: Pitman.
Chen, W. F., and E. M. Lui. 1987. Structural stability: Theory and implementation. New York: Elsevier.
Cheuk, C. Y., D. J. White, and M. D. Bolton. 2007. “Large-scale modelling of soil-pipe interaction during large amplitude cyclic-movements of partially embedded pipelines.” Can. Geotech. J. 44 (8): 977–996. https://doi.org/10.1139/T07-037.
Dingle, H. R. C., D. J. White, and C. Gaudin. 2008. “Mechanisms of pipe embedment and lateral breakout on soft clay.” Can. Geotech. J. 45 (5): 636–652. https://doi.org/10.1139/T08-009.
DNV (Det Norske Veritas). 2010. “On-bottom stability design of submarine pipelines.” Recommended Practice DNV-RP-F109. Oslo, Norway: DNV.
Galambos, T. V. 1998. Guide to stability design criteria for metal structures. 5th ed. New York: Wiley.
Hobbs, R. E. 1984. “In-service buckling of heated pipelines.” J. Transp. Eng. 110 (2): 175–189. https://doi.org/10.1061/(ASCE)0733-947X(1984)110:2(175).
Kerr, A. D. 1978. “Analysis of thermal track buckling in the lateral plane.” Acta Mech. 30 (1–2): 17–50. https://doi.org/10.1007/BF01177436.
Marshall, P. W. 1992. Design of welded tubular connections: Basis and use of AWS code provisions. New York: Elsevier.
MathWorks. 2016. Matlab user manuals. Natick, MA: MathWorks.
McCarron, W. O. 2015. “Subsea flowline buckle capacity considering uncertainty in pipe-soil interaction.” Comput. Geotech. 68: 17–27. https://doi.org/10.1016/j.compgeo.2015.03.005.
McCarron, W. O. 2016. “Limit analysis and finite element evaluations of pipe-soil interaction resistance.” Can. Geotech. J. 53 (1): 14–21. https://doi.org/10.1139/cgj-2014-0409.
McCarron, W. O. 2017. “Limit analysis method for evaluating soil resistance to lateral motions of pipelines partially embedded in a seafloor.” Int. J. Geomech. 17 (9): 04017066. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000961.
Najjar, S. S., R. B. Gilbert, E. Liedtke, B. McCarron, and A. G. Young. 2007. “Residual shear strength for interfaces between pipelines and clays at low effective normal stresses.” J. Geotech. Geoenviron. Eng. 133 (6): 695–706. https://doi.org/10.1061/(ASCE)1090-0241(2007)133:6(695).
SAFEBUCK. 2011. Safe design of pipelines with lateral buckling: Design guideline. Aberdeen, UK: Atkins Ltd.
SAFEBUCK. 2014. Feedback from operating pipelines. Aberdeen, UK: Atkins Ltd.
Sparks, C. P. 1984. “The influence of tension, pressure and weight on pipe and riser deformations and stresses.” Trans. Am. Soc. Mech. Eng. 106 (1): 46–54. https://doi.org/10.1115/1.3231023.
Timoshenko, S. P., and J. M. Gere. 1961. Theory of elastic stability. New York: McGraw-Hill.
Toma, S., and W. F. Chen. 1979. “Analysis of fabricated tubular columns.” J. Struct. Div. 105 (11): 2343–2366.
White, D. J., E. C. Clukey, M. F. Randolph, N. P. Boylan, M. F. Bransby, A. Zakeri, A. J. Hill, and C. Jaeck. 2017. “The state of knowledge of pipe-soil interaction for on-bottom pipeline design.” In Proc., Offshore Technology Conf. Houston: Offshore Technology Conference.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Nov 28, 2017
Accepted: Jul 10, 2018
Published online: Nov 21, 2018
Published in print: Feb 1, 2019
Discussion open until: Apr 21, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.