Scouring Damage to Buried Pipes Caused by Leakage Jets: Experimental Study
Publication: Journal of Pipeline Systems Engineering and Practice
Volume 9, Issue 4
Abstract
This paper reports on an experimental study on the scouring of pipe materials on the outside of leaks caused by soil fluidization. A base experiment was designed consisting of a 3 mm diameter hole angled at 45° to the horizontal in a 110 mm diameter unplasticized polyvinyl chloride (uPVC) pipe. Five parameters were investigated in a sensitivity analysis: soil particle size, leakage flow rate, leak orientation, cover depth, and pipe material. The development of the scour patterns was measured at regular intervals. It was found that the leak jet orientation had the greatest impact on the scouring rate, followed by the leakage flow rate, sand particle size, pipe material, and cover depth.
Get full access to this article
View all available purchase options and get full access to this article.
References
Alsaydalani, M. O. A., and C. R. I. Clayton. 2014. “Internal fluidization in granular soils.” J. Geotech. Geoenviron. Eng. 140 (3): 1–10. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001039.
Bailey, N. D. 2015. “Development and testing of experimental equipment to measure pore pressure and dynamic pressure at points outside a pipe leak.” M.Sc. dissertation, Univ. of Cape Town.
Barbhuiya, A. K., and S. Dey. 2004. “Local scour at abutments: A review.” Sadhana 29 (5): 449–476. https://doi.org/10.1007/BF02703255.
Briaud, J. L., F. C. K. Ting, H. C. Chen, Y. Cao, S. W. Han, and K. W. Kwak. 2001. “Erosion function apparatus for scour rate predictions.” J. Geotech. Geoenviron. Eng. 127 (2): 105–113. https://doi.org/10.1061/(ASCE)1090-0241(2001)127:2(105).
Cardoso, A. H., and R. Bettess. 1999. “Effects of time and channel geometry on scour at bridge abutments.” J. Hydraul. Eng. 125 (4): 388–399. https://doi.org/10.1061/(ASCE)0733-9429(1999)125:4(388).
Clayton, C. R. I., and J. E. van Zyl. 2007. “The effect of pressure on leakage in water distribution systems.” Proc. ICE—Water Manage. 160 (WM2): 109–114. https://doi.org/10.1680/wama.2007.160.2.109.
Consol. 2014. “Consol mineral products.” Accessed October 13, 2015. http://www.consol.co.za/business/products/minerals.
Craig, R. F. 2004. Craig’s soil mechanics. London: Taylor & Francis.
Finnemore, E. J., and J. B. Franzini. 2001. Fluid mechanics with engineering applications. New York: McGraw-Hill.
Gent, M., M. Menéndez, S. Torno, J. Toraño, and A. Schenk. 2012. “Experimental evaluation of the physical properties required of abrasives for optimizing waterjet cutting of ductile materials.” Wear 284–285 (Apr): 43–51. https://doi.org/10.1016/j.wear.2012.02.012.
Goddard, J. B. 1994. “Abrasion resistance of piping systems.” Accessed April 19, 2014. http://www.ads-pipe.com/pdf/detret/technicalnote2.116-abrasionresistance.pdf.
Ha, C.-S., Y. Kim, W.-K. Lee, W.-J. Cho, and Y. Kim. 1998. “Fracture toughness and properties of plasticized PVC and thermoplastic polyurethane blends.” Polymer 39 (20): 4765–4772. https://doi.org/10.1016/S0032-3861(97)10326-3.
Lambert, A. 2001. “What do we know about pressure: Leakage relationships in distribution systems?” In Proc., IWA Conf. System Approach to Leakage Control and Water Distribution Systems Management, 1–8. London: International Water Association.
Majid, Z. A., and R. Mohsin. 2013. “Multiple failures of API 5L X42 natural gas pipeline.” Eng. Fail. Anal. 31 (Jul): 421–429. https://doi.org/10.1016/j.engfailanal.2013.02.012.
Majid, Z. A., R. Mohsin, Z. Yaacob, and Z. Hassan. 2010. “Failure analysis of natural gas pipes.” Eng. Fail. Anal. 17 (4): 818–837. https://doi.org/10.1016/j.engfailanal.2009.10.016.
Majid, Z. A., R. Mohsin, and M. Z. Yusof. 2012. “Experimental and computational failure analysis of natural gas pipe.” Eng. Fail. Anal. 19 (Jan): 32–42. https://doi.org/10.1016/j.engfailanal.2011.09.004.
Niven, R. K., and N. Khalili. 1998. “In situ fluidisation by a single internal vertical jet.” J. Hydraul. Res. 36 (2): 199–228. https://doi.org/10.1080/00221689809498633.
Pike, S. 2013. “Scouring patterns of pipes outside leaks due to soil agitation.” Undergraduate dissertation, Univ. of Cape Town.
Pike, S. 2016. “Experimental investigation of leakage-induced pipe erosion outside of pipe leaks.” M.Sc. dissertation, Univ. of Cape Town.
Simarro, G., C. M. S. Fael, and A. H. Cardoso. 2011. “Estimating equilibrium scour depth at cylindrical piers in experimental studies.” J. Hydraul. Eng. 137 (9): 1089–1093. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000410.
van Zyl, J., M. Alsaydalani, C. Clayton, T. Bird, and A. Dennis. 2013. “Soil fluidisation outside leaks in water distribution pipes—Preliminary observations.” Proc. ICE—Water Manage. 166 (10): 546–555.
Walski, T., W. Bazts, E. T. Posluszny, M. Weir, and B. E. Whitman. 2006. “Modeling leakage reduction through pressure control.” Am. Water Works Assoc. 98 (4): 147–155. https://doi.org/10.1002/j.1551-8833.2006.tb07642.x.
Yang, F., and V. Hlavacek. 1999. “Improvement of PVC wearability by addition of additives.” Powder Technol. 103 (2): 182–188. https://doi.org/10.1016/S0032-5910(99)00026-1.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Jan 19, 2017
Accepted: Feb 23, 2018
Published online: Jul 24, 2018
Published in print: Nov 1, 2018
Discussion open until: Dec 24, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.