Simulation of Behavior of In-Service Metal Culverts
Publication: Journal of Pipeline Systems Engineering and Practice
Volume 5, Issue 2
Abstract
As part of an experimental program, a large number of in-service culverts were tested to investigate the influence of several parameters on field performance of culverts. These parameters included cover depth, load application, size, shape, and other properties of corrugated metal culverts. Response of 14 test culverts was simulated using a two-dimensional finite element program and a three-dimensional finite difference program. Deflections predicted from the two-dimensional analyses were larger than the deflections measured in the field. However, the experimental and calculated thrust forces were similar. Deflections and thrust forces predicted from the three-dimensional analysis were similar to the experimental results. The critical factors affecting the response of the culverts include cover depth, culvert size, metal thickness, and elastic modulus and other properties of backfill soil. The influence of these parameters on the culvert behavior is investigated through numerical simulations using the established modeling properties.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Funding for this research was provided by the Ohio Department of Transportation (ODOT) and is gratefully acknowledged. The authors thank the ODOT Office of Structural Engineering and, in particular, technical liaisons Amjad Waheed, P.E., and Bill Krouse, P.E., for their assistance with the project.
References
AASHTO. (2002). Standard specifications for highway bridges, 17th Ed., AASHTO, Washington, DC.
Chang, C. S., Espinoza, J. M., and Selig, E. T. (1980). “Computer analysis of Newton Creek culvert.” J. Geotech. Eng. Div., 531–556.
Chelliah, D. (1992). “Experimental and numerical analysis of a pipe arch culvert subjected to exceptional live load.” M.S. thesis, Ohio Univ., Athens, OH.
Cook, R. D., Malkus, D. S., and Plesha, M. E. (1989). Concepts and applications of finite element analysis, 3rd Ed., Wiley, New York.
Duncan, J. M. (2004). “Friction angles for sand, gravel and rock.” Lecture Notes for the Kenneth L. Lee Memorial Seminar. Long Beach, CA.
Duncan, J. M., Byrne, P., Wong, K. S., and Mabry, P. (1980). “Strength, stress-strain and bulk modulus parameters for finite element analyses of stresses and movements in soil masses.”, College of Engineering, Univ. of California, Berkeley, CA.
(Fast Lagrangian Analysis of Continua in 3 Dimensions), Version 3.0. [computer software]. Itasca Consulting Group, Minneapolis, MN.
Katona, M. G., Meinhert, D. F., Orillac, R., and Lee, C. H. (1979). “Structural evaluation of new concepts for long-span culverts and culvert installations.”, Federal Highway Administration, Washington, DC.
Katona, M. G., Smith, J. M., Odello, R. S., and Allgood, J. R. (1976). “CANDE–a modern approach for the structural design and analysis of buried culverts.”, U.S. Naval Civil Engineering Lab., Port Hueneme, CA.
Kerh, T., and Yee, T. C. (2000). “Analysis of a deformed three-dimensional culvert structure using neural networks.” J. Adv. Eng. Software, 31(5), 367–375.
Kunecki, B., and Ebeltoft, R. (2007). “Full-scale test of steel pipe-arch culvert and finite element analysis by two commercial codes.” Proc., TRB 2007 Annual Meeting, Transportation Research Board, Washington DC, 1–11.
Limpeteeprakarn, T. (2006). “Modeling of flexible pipe for culvert application under shallow burial condition.” Ph.D. dissertation, Florida Atlantic Univ., Boca Raton, FL.
McVay, M. C. (1982). “Evaluation of numerical modeling of buried conduits.” Ph.D. dissertation, Univ. of Massachusetts, Amherst, MA.
McVay, M. C., and Selig, E. T. (1982). “Performance and analysis of a long-span culvert.” Transportation Research Record 878, Transportation Research Board, Washington, DC, 23–29.
Moore, I. D., Becerril, D., Sezen, H., and Sheldon, T. (2012). “Structural design of culvert joints.”, National Cooperative Highway Research Program, Transportation Research Board, National Research Council, Washington DC.
Moore, I. D., and Brachman, R. W. (1994). “Three-dimensional analysis of flexible circular culverts.” J. Geotech. Eng., 1829–1844.
Moore, I. D., and Taleb, B. (1999). “Metal culvert response to live loading: Performance of three-dimensional analysis.” Transportation Research Record 1656, Transportation Research Board, Washington, DC, 37–44.
Musser, S. C. (1989). “CANDE-89 User Manual.”, Federal Highway Administration, Washington, DC.
Rauch, A. F. (1990). “Experimental and numerical investigation of a deep-corrugated steel, box-type culvert.” M.S. thesis, Ohio Univ., Athens, OH.
Sargand, S., Masada, T., and Moreland, A. (2008). “Measured field performance and computer analysis of large-diameter multiplate steel pipe culvert installed in ohio.” J. Perform. Constr. Facil., 391–397.
Sezen, H., Yeau, K. Y., and Fox, P. J. (2008). “In-situ load testing of corrugated steel pipe-arch culverts.” J. Perform. Constr. Facil., 245–252.
Sheldon, T., Sezen, H., and Moore, I. D. (2013). “Joint response of existing pipe culverts under surface live loads.” J. Perform. Constr. Facil.,.
Webb, M. C. (1999). “Improved design and construction of large-span culverts.” Ph.D. dissertation, Univ. of Massachusetts, Amherst, MA.
Wu, T. H. (1977). “Field performance of flexible culvert pipes.”, Ohio Dept. of Transportation, Columbus, OH.
Yeau, K. (2010). “Experimental, analytical, and theoretical investigation of corrugated metal culvert behavior.” Ph.D. dissertation, Ohio State Univ., Columbus, OH.
Yeau, K. Y., and Sezen, H. (2012). “Load rating procedures and performance evaluation of metal culverts.” J. Bridge Eng., 71–80.
Yeau, K. Y., Sezen, H., and Fox, P. J. (2008). “Performance of Existing Corrugated Metal Culverts under Live Load Application.” 87th Transportation Research Board Annual Meeting (Paper No. 687), Transportation Research Board, Washington DC.
Yeau, K. Y., Sezen, H., and Fox, P. J. (2009). “Load performance of in situ corrugated steel highway culverts.” J. Perform. Constr. Facil., 32–39.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jun 11, 2011
Accepted: Sep 23, 2013
Published online: Nov 15, 2013
Discussion open until: Apr 15, 2014
Published in print: May 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.