Acoustic Emission Leak Detection on a Metal Pipeline Buried in Sandy Soil
Publication: Journal of Pipeline Systems Engineering and Practice
Volume 4, Issue 3
Abstract
An acoustic emission (AE) method was used to detect leaks and discern their location under flow conditions in a 304.8-m-long, 305-mm-diameter buried steel pipeline at the New Jersey Institute of Technology/U.S. Environmental Protection Agency (NJIT/USEPA) Buried Pipeline Test Facility in Edison, New Jersey. A leak was successfully detected, and its discernible location was indicated to within 0.3 m, with a sensor separation of 65.5 m, and with water in the pipeline flowing at . Encouraging results were also obtained for a leak that was discernible at a sensor separation of 21.3 m under the same flow conditions. Previous static pressure leak testing on this pipeline detected a leak at sensor separations of up to 192.9 m, and it is expected that mitigating the effects of both externally produced and flow-induced background noise will allow for the detection of smaller leak rates under greater flow conditions. These results demonstrated that effective AE leak detection could be performed under flow conditions on water-filled buried metal pipelines in sandy soils.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was sponsored through the Northeast Hazardous Substance Research Center (NHSRC) of the United States Environmental Protection Agency under Grant No. R-825512-01. The contents of this paper reflect the views of the authors, who are responsible for the facts and the accuracy of the information presented herein. The contents do not necessarily reflect views or policies of NJIT, NHSRC, or USEPA. This paper does not constitute a standard, specification, or regulation. The authors wish to thank Dr. Warren Chen and Mr. Alex Samayoa, formerly of PAC, for their assistance and support, Mahesh Khanolkar and Sim Liu of NJIT for their assistance in the performance of the AE testing, and also anonymous reviewers whose contributions substantially improved the presentation of the paper.
References
Ahadi, M., and Bakhtiar, M. S. (2010). “Leak detection in water-filled plastic pipes through the application of tuned wavelet transforms to acoustic emission signals.” Appl. Acoust., 71(7), 634–639.
American Petroleum Institute (API). (1998). “Results of range-finding testing of leak detection and leak location technologies for underground pipelines.”, American Petroleum Institute, Washington, DC.
ASTM. (2012a). “Standard practice for leak detection and location using surface-mounted acoustic emission sensors.” E1211/E1211M-12, West Conshohocken, PA.
ASTM. (2012b). “Standard terminology for nondestructive examinations.” E1316-11b, West Conshohocken, PA.
Carlyle, J. M., and Kelly, V. (2000). “Maximum acoustic leak sensor spacing experiments part 1–navy line.” Carlyle Consulting Report, Carlyle Consulting, Yardley, PA.
da Silva, H. V., Morooka, C. K., Guilherme, I. R., Fonseca, T. V. da., and Mendes, J. R. P. (2005). “Leak detection in petroleum pipelines using a fuzzy system.” J. Petrol. Sci. Eng., 49(3–4), 223–238.
Fantozzi, M. (2000). “Acoustic emission technique the solution for leakage detection and location on water pipelines.” Proc., 15th World Conf. on Non_Destructive Testing, AIPnD—Italian Society for Non-Destructive Testing and Monitoring Diagnostics, Brescia, Italy, 〈http://www.ndt.net/article/wcndt00/papers/idn183/idn183.htm〉.
Gao, Y., Brenna, M. J., Joseph, P. F., Muggleton, J. M., and Hunaidi, O. (2005). “On the selection of acoustic/vibration sensors for leak detection in plastic water pipes.” J. Sound Vib., 283(3–5), 927–941.
Heim, P. M. (1979). “Conducting leak detection search.” J. Am. Water Works Assoc., 71(2), 66–69.
Hessel, G., Schmitt, W., Vorst, K. V., and Welss, F.-P. (1999). “Aneural network approach for acoustic leak monitoring in the VVER-440 pressure vessel head.” Prog. Nucl. Energy, 34(3), 173–183.
Hunaidi, O., Chu, W., Wang, A., and Guan, W. (1999). “Leak detection methods for plastic water distribution pipes.” Prog. Nucl. Energy, 34(3), 173–218.
Hyun, S.-Y., Jo, Y.-S., and Oh, H.-C., and Kirn, S.-Y. (2003). “An experimental study on a ground-penetrating radar for detecting water-leaks in buried water transfer pipes.” Proc. 6th Int. Symp. on Antennas, Propagation and EM Theory, IEEE, 596–599.
Juliano, T. M., and Meegoda, J. N. (2001). “Intelligent systems for conveyance and storage infrastructures.” Proc., SPIE–Int. Soc. Optical Eng., Vol. 4576, SPIE, Bellingham, WA, 126–137.
Khulief, Y. A., Khalifa, A., Mansour, R. B., and Habib, M. A. (2012). “Acoustic detection of leaks in water pipelines using measurements inside pipe.” J. Pipeline Syst. Eng. Pract., 3(2), 47–54.
Mandal, S. K., Chan, F. T. S., and Tiwari, M. K. (2012). “Leak detection of pipeline: An integrated approach of rough set theory and artificial bee colony trained SVM.” Expert Syst. Appl., 39(3), 3071–3080.
Meegoda, J. N., and Juliano, T. M. (2003). “Research, development, demonstration, and validation of intelligent systems for conveyance and storage infrastructures.”, U.S. Army Industrial Ecology Center, Dover, NJ.
Miller, R. K. (1998). “Procedures for detecting and locating leaks in liquid-filled, buried pipelines using acoustic emission.”, Physical Acoustics Corp., Princeton Junction, NJ.
Miller, R. K., Pollock, A. A., Watts, D. J., Carlyle, J. M., Tafuri, A. N., and Yezzi, J. J. (1999). “A reference standard for the development of acoustic emission pipeline leak detection techniques.” NDT&E International, 32(1), 1–8.
Physical Acoustics Corporation. (2001). Chapter 4, MISTRAS 2001 User’s Manual, Rev.1, Physical Acoustics, Princeton Junction, NJ, 1–4.
Pollock, A. A. (1989). “Acoustic emission inspection.” Metals handbook, 9th Ed., 17, ASM International, Materials Park, Russell Township, OH, 278–294.
Pudar, R. S., and Liggett, J. A. (1992). “Leaks in pipe networks.” J. Hydraul. Eng., 118(7), 1031–1046.
Rewerts, L. E., Roberts, R., and Clark, M. A. (1997). “Dispersion compensation in acoustic emission pipeline leak location.” Review of Progress in QNDE, 16A, D. O. Thompson and D. E. Chimenti, eds., Plenum Press, New York, 427–434.
Rewerts, L. E., Roberts, R., and Clark, M. A. (1998). “The role of propagation characteristics in acoustic emission pipeline leak location.” Review of progress in QNDE, 17A, D. O. Thompson and D. E. Chimenti, eds., Plenum Press, New York, 501–508.
Sneddon, K. W., Olhoeft, G. R., and Powers, M. H. (2000). “Determining and mapping DNAPL saturation values from noninvasive GPR measurements.” Proc., of SAGEEP 2000, V. A. Arlington, M. H. Powers, A.-B. Ibrahim, and L. Cramer, eds., EEGS, Wheat Ridge, CO, 293–302.
Strei, M., Roberts, R., Holland, S., and Chimenti, D. E. (2004). “Leak location in plates: Compensation for multi-mode dispersion.” Review of Quantitative Nondestructive Evaluation, 23, D. O. Thompson and D. E. Chimenti, eds., American Institute of Physics, Melville, NY, 1398–1405.
Weil, G. J. (1993). “Non-contact, remote sensing of buried water pipeline leaks using infrared thermography.” Water Management in the ’90s: A Time for Innovation, Proc., of the 20th Anniversary Conf., K. Hon, ed., ASCE, Reston, VA, 404–407.
Weil, G. J., Graf, R. J., and Forister, L. M. (1994). “Remote sensing pipeline rehabilitation methodologies based upon the utilization of infrared thermography.” Urban Rehabilitation Programs and Techniques, W. A. Macaitis, ed., ASCE, Reston, VA, 173–81.
Wood, B. R. A., and Harris, R. W. (2000). “Structural integrity and remnant life evaluation of pressure equipment from acoustic emission monitoring.” Int. J. Pressure Vessels Piping, 77(2–3), 125–132.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Oct 2, 2011
Accepted: Dec 19, 2012
Published online: Dec 21, 2012
Discussion open until: May 21, 2013
Published in print: Aug 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.