Brief History of Upheaval Buckling Studies for Subsea Buried Pipeline
Publication: Journal of Pipeline Systems Engineering and Practice
Volume 4, Issue 3
Abstract
Since the early seventies, pipelines have become one of the main means of transporting oil and gas offshore in many parts of the world. In-service hydrocarbons must be transported at high temperature and pressure to ease the flow and prevent solidification of the wax fraction. The buckling of subsea pipelines occur because of the introduction of axial compressive forces caused by the constrained expansions set up by thermal and internal pressure actions. Such compressive forces can lead to either lateral buckling in the plane of the seabed or buckling in a vertical plane. To ensure minimal interference with other marine activities, the pipelines can be buried in a trench. In such cases, the lateral soil restraint exceeds the vertical uplift restraint created by the pipe’s submerged weight. Therefore, vertical buckling is of particular interest with respect to entrenched subsea pipelines. The possibility of upheaval buckling in subsea pipelines has been appreciated in the pipeline industry for over 30 years. The recent growth in interest in high-temperature pipelines in China is stimulated because of the frequent failures in Bohai Gulf. This paper describes the history of the theoretical and experimental studies on the subsea buried pipeline vertical buckling, as well as the authors’ experiences with this problem. Engineers could benefit from the literature reviews and summaries in this area. The paper also highlights the design of protective covers for the pipelines, and finally identifies areas for further development.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The work described in this paper was funded by China National Natural Science Foundation (No. 40776055). This research was also supported by the Foundation for Innovative Research Groups of the National Natural Science Foundation of China (Grant No. 51021004).
References
Allan, T. (1968). “One-way buckling of compressed strip under lateral loading.” J. Mech. Eng. Sci., 10(2), 175–181.
American Lifeline Alliance (ALA). (2001). Guidelines for the design of buried pipe, FEMA, ASCE, Washington, DC 〈http://www.americanlifelinesalliance.com/pdf/Update061305.pdf〉.
Anand, S., and Agarwal, S. L. (1981). “Field and laboratory studies for evaluating submarine pipeline frictional resistance.” J. Energy Resour. Technol., 103(3), 250–254.
Andreuzzi, F., and Perrone, A. (2001). “Analytical solution for upheaval buckling in buried pipeline.” Comput. Methods Appl. Mech. Eng., 190(39), 5081–5087.
Bai, Y., and Bai, Q. (2005). “Soil and pipe interaction.” Chapter 5, Subsea pipelines and risers, Elservier Science, Houston, 83–88.
Baldry, J. A. S. (1973). “The buckling of axially loaded buried pipelines.” M.S. thesis, Univ. of Cambridge, Cambridge, UK.
Ballet, J. P., and Hobbs, R. E. (1992). “Asymmetric effects of prop imperfections on the upheaval buckling of pipelines.” Thin-Walled Struct., 13(5), 355–373.
Boer, S., Hulsbergen, C. H., Richards, D. M., Klok, A., and Biaggi, J. P. (1986). “Buckling considerations in the design of the gravel cover for a high temperature oil line.” Proc., 18th Offshore Technology Conf., Offshore Technology Conference, Richardson, TX, 5294, 1–8.
Bouwkamp, J. G., and Stephen, R. M. (1973). “Large diameter pipe under combined loading.” Transp. Engrg. J., 99(3), 521–536.
Bransby, M. F., Newson, T. A., and Brunning, P. (2002). “The upheaval capacity of pipelines in jetted clay backfill.” Int. J. Offshore Polar Eng., 12(4), 280–287.
Cheuka, C. Y., Takeb, W. A., Boltonc, M. D., and Oliveira, J. R. M. S. (2007). “Soil restraint on buckling oil and gas pipelines buried in lumpy clay fill.” Eng. Struct., 29(6), 973–982.
Croll, J. G. A. (1997). “A simplified model of upheaval thermal buckling of subsea pipelines.” Thin-Walled Struct., 29(1–4), 59–78.
Dickin, E. A. (1994). “Uplift resistance of buried pipelines in sand.” Soils Found., 34(2), 41–48.
Einsfeld, R. A., Murray, D. W., and Yoosef-Ghodsi, N. (2003). “Buckling analysis of high-temperature pressurized pipelines with soil-structure interaction.” J. Braz. Soc. Mech. Sci. Eng., 25(2), 164–169.
Friedmann, Y. (1986). “Some aspects of the design of hot buried pipelines.” Offshore Oil and Gas Line Technology Conf., Offshore Technology Conference, Richardson, TX, 1–34.
Friedmann, Y., and Debouvry, B. (1992). “Analytical design method helps prevent buried pipe upheaval.” Pipeline Ind., 11, 63–68.
Gao, X. F., Liu, R., and Yan, S. W. (2011). “Model test based soil spring model and application in pipeline thermal buckling analysis.” China Ocean Eng., 25(3), 507–518.
Gresnigt, M., and van Foeken, R. J. (2001). “Local buckling of UOE and seamless steel pipes.” Int. Offshore and Polar Engineering Conf., The International Society of Offshore and Polar Engineers, California, Vol. 2, 131–142.
Guijt, J. (1990). “Upheaval buckling of offshore pipeline: Overview and introduction.” Proc., 22nd Annual Offshore Technology Conf., Offshore Technology Conference, Richardson, TX, 573–578.
Hesar, M. (2004). “Pipeline-seabed interaction in soft clay.” Proc., 23rd Int. Conf. on Offshore Mechanics and Arctic Engineering, ASME, New York, 1–9.
Hibbitt, H. D., Karlsson, B. I., and Sorensen, P. (2000). ABAQUS theoretical manual, Version 4.5, Offshore Technology Conference, Richardson, TX.
Hobbs, R. E. (1981). “Pipeline buckling caused by axial loads.” J. Constr. Steel Res., 1(2), 2–10.
Hobbs, R. E. (1984). “In-service buckling of heated pipelines.” J. Transp. Eng., 110(2), 175–189.
Hunt, G. W., and Blackmore, A. (1997). “Homoclinic and heteroclinic solutions of upheaval buckling.” Phil. Trans. R. Soc. Lon., 355(4), 2185–2195.
Ju, G. T., and Kyriakides, S. (1988). “Thermal buckling of offshore pipelines.” J. Offshore Mech. Arctic Eng., 110(4), 355–364.
Jukes, P., Eltaher, A., and Sun, J. (2009). “The latest developments in the design and simulation of deepwater subsea oil and gas pipelines using FEA.” Proc., 3rd ISOPE Int. Deep-Ocean Technology Symp.: Deepwater Challenge, IDOT-2009, International Society of Offshore and Polar Engineers, Cupertino, CA, 70–82.
Kerr, A. D. (1974). “On the stability of the railroad track in the vertical plane.” Rail Int., 5, 131–142.
Kerr, A. D. (1978). “Lateral buckling of railroad tracks due to constrained thermal expansion.” Railroad track mechanics and technology, Pergamon Press, Oxford, UK, 315–328.
Klever, F. J., Van Helvoirt, L. C., and Sluyterman, A. C. (1990). “A dedicated finite-element model for analyzing upheaval bucking response of submarine pipelines.” Proc., 22nd Annual Offshore Technology Conf., Houston, 529–538.
Konuk, I., Fredj, A., and Yu, S. (2005). “3-dimensional bifurcations of pipe-in-pipe structures.” Proc., Int. Conf. on Offshore Mechanics and Arctic Engineering—OMAE 3, ASME, New York, 747–753.
Lim, M. L., Kim, M. K., Kim, T. W., and Jang, J. W. (2001). “The behavior analysis of buried pipeline: Considering longitudinal permanent ground deformation.” Proc., Pipelines 2001: Advances in Pipelines Engineering and Construction, J. P. Castronovo, ed., ASCE, Reston, VA, 3, 1–11.
Liu, J. X., Zhang, H. M., Meng, Q. R., and Zhang, H. (2008). “Study examines causes of upheaval buckling in shallow subsea PIP lines.” Oil Gas J., 106(6), 53–57.
Liu, R., Wang, W. G., and Yan, S. W. (2012). “Engineering measures for preventing upheaval buckling of buried submarine pipelines.” Appl. Math. Mech., 36(6), 781–796.
Liu, R., Yan, S. W., and Wu, X. L. (2013). “Model test studies on soil restraint to pipeline buried in Bohai soft clay.” J. Pipeline Syst. Eng. Pract., 4(1), 49–56.
Lyons, C. G. (1973). “Soil resistance to lateral sliding of marine pipelines.” Proc., 5th Offshore Technology Conf., Offshore Technology Conference, Richardson, TX, 479–484.
Maltby, T. C., and Calladine, C. R. (1995a). “An investigation into upheaval buckling of buried pipelines—I. Experimental apparatus and some observations.” Int. J. Mech. Sci., 37(9), 943–963.
Maltby, T. C., and Calladine, C. R. (1995b). “An investigation into upheaval buckling of buried pipelines—II. Theory and analysis of experimental observations.” Int. J. Mech. Sci., 37(9), 965–983.
Mandolini, A., Minutolo, V., and Ruocco, E. (2001). “Coupling of underground pipelines and slowly moving landslides by beam analysis.” Comput. Model. Eng. Sci., 2(1), 39–48.
Moradi, M., and Craig, W. H. (1998). “Observation of upheaval buckling of buried pipelines.” Proc., Centrifuge 98, CRC Press (Taylor and Francis Group), FL, 693–698.
Newson, T., and Deljoui, P. (2006). “Finite element modeling of upheaval buckling of buried offshore pipelines in clayey soils.” Proc., GeoShanghai 06, ASCE, Houston, TX, 351–358.
Nielsen, N. J. R., Lyngberg, B., and Pedersen, P. T. (1990). “Upheaval buckling failures of insulated burial pipelines—A case story.” Proc., 22nd Annual Offshore Technology Conf., Offshore Technology Conference, Richardson, TX, 581–592.
Nielsen, N. J. R., Pedersen, P. T., Grundy, A. K., and Lyngberg, B. S. (1990). “New design criteria of upheaval creep of buried sub-sea pipelines.” J. Offshore Mech. Arctic Eng., 112(4), 290–296.
O’Rourke, M., and Liu, X. (1999). Response of buried pipelines subject research earthquake effects, Multidisciplinary Center for Earthquake Engineering Research, Univ. of Buffalo, Buffalo, NY.
Palmer, A. C., et al. (2003). “Uplift resistance of buried submarine pipelines: Comparison between centrifuge modeling and full-scale tests.” Geotechnique, 53(10), 877–883.
Palmer, A. C., and Baldry, J. A. S. (1974). “Lateral buckling of axially-compressed pipelines.” J. of Petroleum Technol., 26, 1283–1284.
Palmer, A. C., Ellinas, C. P., Richards, D. M., and Guijt, J. (1990). “Design of submarine pipelines against upheaval buckling.” Proc., 22nd Offshore Technology Conf., Offshore Technology Conference, Richardson, TX, 540–550.
Pasqualino, I. P., Alves, J. L. D., and Battista, R. C. (2001). “Failure simulation of a buried pipeline under thermal loading.” Proc., 20th Int. Conf. on Offshore Mechanics and Arctic Engineering, ASME, New York, 291–297.
Pedersen, P. T., and Jensen, J. J. (1988). “Upheaval creep of buried heated pipelines with initial imperfections.” Marine Struct., 1(1), 11–22.
Raoof, M., and Maschner, E. (1993). “Thermal buckling of subsea pipelines.” Proc., OMAE, ASME, New York, 21–29.
Reddy, B. D. (1979). “An experimental study of the plastic buckling of circular cylinders in pure bending.” Int. J. Solids Struct., 15(9), 669–683.
Richards, D. M., and Andronicou, A. (1986). “Seabed irregularity effects on the buckling of heated submarine pipelines.” WEMT Advances in Offshore Technology, Canada, 250–265.
Rubio, N. P., Roehl, D., and Romanel, C. (2007). “A three dimensional contact model for soil-pipe interaction.” J. Mech. Mater. Struct., 2(8), 1501–1513.
Schaminee, P. E. L., Zorn, N. F., and Schotman, G. J. M. (1990). “Soil response for pipeline upheaval buckling analyses: Full-scale laboratory tests and modeling.” OTC 6486, 22nd Annual Offshore Technology Conf., OTC, Houston, TX, 563–572.
Selvadurai, A. P. S., and Pang, S. (1988). “Non-linear effects in soil-pipeline interaction in the ground subsidence zone.” 6th Int. Conf. of Numr. Methods in Geomech., A. A. Balkema, Rotterdam, Netherlands, 1085–1094.
Shaw, P. K., and Bomba, J. G. (1994). “Finite-element analysis of pipeline upheaval buckling.” Proc., Int. Conf. on Offshore Mechanics and Arctic Engineering (OMAE), ASME, New York, 291–296.
Sherman, D. R. (1976). “Tests of circular steel tubes in bending.” J. Struct. Div., 102(ST11), 2181–2195.
Taylor, N., and Gan, A. B. (1986). “Submarine pipeline buckling imperfection studies.” Thin-Walled Struct., 4(4), 295–323.
Taylor, N., Richardson, D., and Gan, A. B. (1985). “On submarine pipeline frictional characteristics in the presence of buckling.” Proc., 4th Int. Symp. on Offshore Mechanics and Arctic Engineering, ASME, New York, 508–515.
Taylor, N., and Tran, V. (1993). “Prop-imperfection subsea pipeline buckling.” Marine Struct., 6(4), 325–358.
Taylor, N., and Tran, V. (1996). “Experimental and theoretical studies in subsea pipeline buckling.” Marine Struct., 9(2), 211–257.
Vanden Berghe, J. F., Cathie, D., and Ballard, J. C. (2005). “Pipeline uplift mechanisms using finite element analysis.” Proc., 16th Int. Conf. of Soil Mechanics and Foundation Engineering, Millpress Science Publishers, Fugro Engineers SA, Brussels, Belgium, 1801–1804.
Villarraga, J. A., Rodríguez, J. F., and Martínez, C. (2004). “Buried pipe modeling with initial imperfections.” J. Pressure Vessel Technol., 126(2), 250–257.
Wang, J., Eltaher, A., Jukes, P., Sun, J., and Wang, F. S. (2009). “Latest developments in upheaval buckling analysis for buried pipelines.” Proc., Int. Offshore and Polar Engineering Conf., The International Society of Offshore and Polar Engineers (ISOPE), California, 594–602.
Zhang, W., and Tuohy, J. (2002). “A three-dimensional finite element analysis of unburied flexible flowline—A case study.” Proc., Int. Conf. on Offshore Mechanics and Arctic Engineering, ASME, New York, 435–442.
Zhou, Z. J., and Murray, D. W. (1993). “Behaviour of buried pipelines subjected to imposed deformations.” 12th Int. Conf. on Offshore and Arctic Engineering, ASCE, Reston, VA, 115–122.
Zhou, Z., and Murray, D. (1996). “Pipeline beam models using stiffness property deformation relations.” J. Transp. Eng., 122(2), 164–172.
Information & Authors
Information
Published In
Journal of Pipeline Systems Engineering and Practice
Volume 4 • Issue 3 • August 2013
Pages: 170 - 183
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jan 19, 2011
Accepted: Sep 21, 2012
Published online: Sep 23, 2012
Discussion open until: Feb 23, 2013
Published in print: Aug 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.