AC Pipe in North America: Inventory, Breakage, and Working Environments
Publication: Journal of Pipeline Systems Engineering and Practice
Volume 1, Issue 4
Abstract
Asbestos cement (AC) pipe constitutes a significant portion of the water distribution pipes still in service in many North American cities. To understand the state of the AC pipe inventory in North America, a survey was conducted of utilities with a large percentage of AC pipes in their water distribution systems. The survey included questions about pipe inventory, breakage, working environments, rehabilitation/replacement practices, and safety- and health-related management practices. This paper summarizes data from the inventory, breakage, and working environment portions of the survey. The survey obtained relatively complete inventory information for pipe length, size, years of service, breakage condition, and water quality. Information about the nature of the soils surrounding AC pipes was limited. The survey indicated that utility managers’ perceptions of water and soil environments were not always consistent with water and soil test results. Survey data analysis identified pipe age, water quality, and pipe size as important factors contributing to the failure of AC pipes in North America.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers wish to acknowledge the financial support of the National Research Council and the Water Research Foundation (formerly AwwaRF). We also thank Dr. Jian Zhang, the project manager of the WRF project, and members of the project advisor committee, Toni Lyons, Steve MacKellar, Showri Nandagiri, and Julie Spacht, for their critiques during the development of the survey questionnaire. We greatly appreciate the cooperation of the 20 participating utilities for submitting detailed AC pipe information.
References
American Water Works Association (AWWA). (2003). “Standard for asbestos cement distribution pipe 4 in. through 16 in. for water and other liquids.” AWWA C400-03, Denver.
American Water Works Association (AWWA). (2004). Water stats 2002 distribution system survey, Denver.
American Water Works Association Research Foundation (AwwaRF) and DVGW-Technologiezentrum Wasser. (1996). Internal corrosion of water distribution system, 2nd Ed., Denver.
ASTM. (1998). “Standard test methods for asbestos-cement pipe.” ASTM C500-98, Philadelphia.
Carde, C., and Francois, R. (1997). “Effect of the leaching of calcium hydroxide from cement paste on mechanical and physical properties.” Cem. Concr. Res., 27(4), 539–550.
Conroy, P., Cooke, J., and Mills, D. Patel, A., and Russell, A. (2005). Managing the risks presented by pipeburst, redundant and live asbestos cement water distribution mains: Condition assessment methodology for asbestos cement pipe, U.K. Water Industry Research, London.
Eick, H. (1960). “Korrosionsfragen aus dem transportwasser bei asbestzement-druckrohren.” Vom Wasser, 27, 208–305.
Hu, Y., and Hubble, D. (2007). “Factors contributing to the failure of AC water mains.” Can. J. Civ. Eng., 34, 608–621.
Jarvis, B. (1998). “Asbestos-cement pipe corrosion—Interim report.” Rep. Prepared for Customer Services Div., Water Corporation, Western Australia, Australia.
Kirmeyer, G. J., Richards, W., and Smith, C. D. (1994). An assessment of water distribution systems and associated research needs, Distribution Systems, American Water Works Association research Foundation (AwwaRF), Denver.
Little, R. C. (1958). “Sulphur in soils. III: A study of the readily soluble sulfate content and of the total sulphur content of soil.” J. Sci. Food. Agric., 9(5), 273–281.
Makar, J. M., Desnoyers, R., and McDonald, S. Z. (2001). “Failure modes and mechanisms in gray cast iron pipes.” Proc., Int. Conf. on Underground Infrastructure Research: Underground Infrastructure Research: Municipal, Industrial and Environmental Applications, Balkema, Lisse, The Netherlands, 1–10.
Manson, P. W., and Blair, L. R. (1962). “Sulfate resistance of asbestos-cement pipe.” Mater. Res. Stand., 2(10), 828–835.
Marks, R. L., and Hutchcroft, C. R. (1968). “Resistance of asbestos/cement pipe to corrosive soil conditions.” Water and Wastes Eng., 5, 49–53.
Matti, M. A., and Al-Adeebt, A. (1985). “Sulfate attack on asbestos pipes.” The International Journal of Cement Composites and Lightweight Concrete, 7, 169–176.
Mordak, J., and Wheeler, J. (1988). Deterioration of asbestos cement water mains.” Final Rep. Prepared for the Dept. of the Environment, Water Research Center, Wiltshire, U.K.
Moser, A. P. (2001). Buried pipe design, McGraw-Hill, New York.
Nebesar, B., and Riley, G. W. (1983). “Asbestos/cement pipe corrosion: Part 1—Historical, technological, economic, and statistical background.” CANMET Rep. No. 83-16E, Canada Centre for Mineral and Energy Technology, Energy, Mines, and Resources, Ottawa, Ont., Canada.
Rajani, B. B., and McDonald, S. E. (1995). “Water mains break data on different pipe materials for 1992 and 1993.” Rep. Prepared for National Research Council Canada, National research Council Canada, Ottawa, Ont., Canada.
Rajani, B. B., and Zhan, C. (1996). “On the estimation of frost load.” Can. Geotech. J., 33, 629–641.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Jan 6, 2010
Accepted: May 21, 2010
Published online: Oct 15, 2010
Published in print: Nov 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.