Flexural Toughness Evolution of Modified Secondary Recycled Concrete
Publication: Journal of Materials in Civil Engineering
Volume 35, Issue 1
Abstract
In this paper, secondary recycled concrete was modified using basalt fiber (BF) and nanosilica (NS) to form modified secondary recycled concrete (MSRC), to promote the recycling of concrete. The flexural toughness and influence of pore size distribution of the MSRC were analyzed through the four-point flexural mechanics test and nuclear magnetic resonance test, respectively. The results showed that with an increase in the content of BF and NS, the fracture of the coarse aggregate increased and the flexural strength of MSRC increases. According to different evaluation standards, the flexural toughness of the MSRC exhibited a similar trend in different evaluation standards. As the NS content increased, the equivalent flexural strength increased, and as the BF content increased from 2 to , the equivalent flexural strength decreased. Additionally, scanning electron microscope and nuclear magnetic resonance spectroscopy showed that NS and BF had significant influence on the pore structure of the MSRC. When the BF content was , the content of micropores was minimal; and with further increase in BF content, the content of micropores increased, the internal defects increased, and the flexural toughness decreased. Moreover, with the increase in NS content, the content of internal pores decreased and the flexural toughness increased. Therefore, the results showed that BF and NS had a significant toughening effect on the MSRC.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and codes generated or used during the paper appear in the published article.
Acknowledgments
This paper was supported by the Henan Natural Science Foundation (Grant Nos. 182300410134 and 212102310293). We are deeply grateful to Professor Ding Yahong, Liang Weimin, Chu Huaibao, Zhang Juan, Yang Jianhui, and Wei Xiang for their assistance during the experiments.
References
Afroz, M., I. Patnaikuni, and S. Venkatesan. 2017. “Chemical durability and performance of modified basalt fiber in concrete medium.” Constr. Build. Mater. 154 (Nov): 191–203. https://doi.org/10.1016/j.conbuildmat.2017.07.153.
Alnahhal, W., and O. Aljidda. 2018. “Flexural behavior of basalt fiber reinforced concrete beams with recycled concrete coarse aggregates.” Constr. Build. Mater. 169 (Apr): 165–178. https://doi.org/10.1016/j.conbuildmat.2018.02.135.
ASTM. 2021. Standard test method for flexural performance of fiber-reinforced concrete. ASTM C1609/C1609M-19a. West Conshohocken, PA: ASTM.
Bernal, J., E. Reyes, J. Massana, N. Leon, and E. Sachez. 2018. “Fresh and mechanical behavior of a self-compacting concrete with additions of nano-silica, silica fume and ternary mixtures.” Constr. Build. Mater. 160 (Jan): 196–210. https://doi.org/10.1016/j.conbuildmat.2017.11.048.
Branston, J., S. Das, S. Y. Kenno, S. Y. Kenno, and C. Taylor. 2016. “Mechanical behaviour of basalt fibre reinforced concrete.” Constr. Build. Mater. 124 (Oct): 878–886. https://doi.org/10.1016/j.conbuildmat.2016.08.009.
CECS (China Association for Engineering Construction Standardization). 2009. Standard for test method for fiber reinforced concrete. CECS 13. Beijing: China Plan Press.
DBV (Deutscher Beton-Verein). 1998. Bemessungsgrundlagen für stahlfaserbeton imtunnelbau. DBV-1998. Wiesbaden, Germany: DBV.
Dong, J. F., Q. Y. Wang, and Z. W. Guan. 2017. “Material properties of basalt fibre reinforced concrete made with recycled earthquake waste.” Constr. Build. Mater. 130 (Jan): 241–251. https://doi.org/10.1016/j.conbuildmat.2016.08.118.
Gao, D. Y., and L. J. Zhang. 2018. “Flexural performance and evaluation method of steel fiber reinforced recycled coarse aggregate concrete.” Constr. Build. Mater. 159 (Jan): 126–136. https://doi.org/10.1016/j.conbuildmat.2017.10.073.
He, Y., X. Zhang, T. Ji, and L. L. Shui. 2019. “Effect of carboxylic density on sulfate sensitivity of polycarboxylate superplasticizers.” KSCE J. Civ. Eng. 23 (12): 5163–5172. https://doi.org/10.1007/s12205-019-2283-4.
High, C., H. M. Seliem, A. El-Safty, and S. H. Rizkalla. 2015. “Use of basalt fibers for concrete structures.” Constr. Build. Mater. 96 (Oct): 37–46. https://doi.org/10.1016/j.conbuildmat.2015.07.138.
Hiroshi, H., and B. Nemkumar. 2008. “Correlating flexural and shear toughness of lightweight fiber-reinforced concrete.” ACI Mater. J. 105 (3): 251–257.
Huda, S. B., and M. S. Alam. 2014. “Mechanical behavior of three generations of 100% repeated recycled coarse aggregate concrete.” Constr. Build. Mater. 65 (Aug): 574–582. https://doi.org/10.1016/j.conbuildmat.2014.05.010.
Jiao, H., Y. Wu, X. Chen, and Y. Yang. 2019. “Flexural toughness of basalt fibre-reinforced shotcrete and industrial-scale testing.” Adv. Mater. Sci. Eng. 2019 (Oct): 6568057. https://doi.org/10.1155/2019/6568057.
Kachouh, N., H. El-Hassan, and T. El-Maaddawy. 2021. “Influence of steel fibers on the flexural performance of concrete incorporating recycled concrete aggregates and dune sand.” J. Sustain. Cem.-Based Mater. 10 (3): 165–192. https://doi.org/10.1080/21650373.2020.1809546.
Katkhuda, H., and N. Shatarat. 2017. “Improving the mechanical properties of recycled concrete aggregate using chopped basalt fibers and acid treatment.” Constr. Build. Mater. 140 (Jun): 328–335. https://doi.org/10.1016/j.conbuildmat.2017.02.128.
León, N., J. Massana, and F. Alonso. 2014. “Effect of and on cement mortars for use in agriculture and livestock production.” Biosyst. Eng. 123 (Dec): 1–11. https://doi.org/10.1016/j.biosystemseng.2014.04.009.
Li, J. J., J. Chen, C. J. Wan, and J. G. Niu. 2021. “Flexural toughness and evaluation method of steel fiber reinforced self-compacting lightweight aggregate concrete.” Constr. Build. Mater. 277 (Mar): 122297. https://doi.org/10.1016/j.conbuildmat.2021.122297.
Li, W., Z. Huang, F. Cao, Z. Sun, and S. P. Shah. 2015. “Effects of nano-silica and nano-limestone on flowability and mechanical properties of ultra-high-performance concrete matrix.” Constr. Build. Mater. 95 (Oct): 366–374. https://doi.org/10.1016/j.conbuildmat.2015.05.137.
Liu, H., M. Hua, P. Zhu, C. Chen, X. Wang, Z. Qian, and Y. Dong. 2021. “Effect of freeze–thaw cycles on carbonation behavior of three generations of repeatedly recycled aggregate concrete.” Appl. Sci. 11 (6): 2643. https://doi.org/10.3390/app11062643.
Liu, Z., Y. Lu, S. Li, S. Zong, and S. Yi. 2020. “Flexural behavior of steel fiber reinforced self-stressing recycled aggregate concrete-filled steel tube.” J. Cleaner Prod. 274 (Nov): 122724. https://doi.org/10.1016/j.jclepro.2020.122724.
Mastali, M., A. Dalvand, and A. R. Sattarifard. 2016. “The impact resistance and mechanical properties of reinforced self-compacting concrete with recycled glass fibre reinforced polymers.” J. Cleaner Prod. 133 (Jun): 228–234. https://doi.org/10.1016/j.jclepro.2016.02.148.
Mehmet, G., G. Erhan, O. H. Oznur, I. Taha, and M. T. Yasemin. 2015. “Failure characteristics of self-compacting concretes made with recycled aggregates.” Constr. Build. Mater. 98 (Nov): 334–344. https://doi.org/10.1016/j.conbuildmat.2015.08.036.
Mohseni, E., F. Naseri, R. Amjadi, M. M. Khotbehasrs, and M. M. Ranjbar. 2016. “Microstructure and durability properties of cement mortars containing and rice husk ash.” Constr. Build. Mater. 114 (Jul): 656–664. https://doi.org/10.1016/j.conbuildmat.2016.03.136.
Mukharjee, B. B., and S. V. Barai. 2014. “Influence of nano-silica on the properties of recycled aggregate concrete.” Constr. Build. Mater. 55 (Mar): 29–37. https://doi.org/10.1016/j.conbuildmat.2014.01.003.
Noaman, A. T., B. H. A. Bakar, and H. M. Akil. 2016. “Experimental investigation on compression toughness of rubberized steel fibre concrete.” Constr. Build. Mater. 115 (Jul): 163–170. https://doi.org/10.1016/j.conbuildmat.2016.04.022.
Oltulu, M., and R. Sahin. 2013. “Effect of , and powders on compressive strengths and capillary water absorption of cement mortar containing fly ash: A comparative study.” Energy Build. 58 (Mar): 292–301. https://doi.org/10.1016/j.enbuild.2012.12.014.
Ramesh, R. B., O. Mirza, and W. H. Kang. 2019. “Mechanical properties of steel fiber reinforced recycled aggregate concrete.” Struct. Concr. 20 (2): 745–755. https://doi.org/10.1002/suco.201800156.
Romualdi, J. P., and G. B. Batson. 1963. “Mechanics of crack arrest in concrete.” J. Eng. Mech. Div. 89 (3): 147–168. https://doi.org/10.1061/JMCEA3.0000381.
Shahjalal, M., K. Islam, J. Rahman, K. S. Ahmed, M. R. Karim, and A. H. M. M. Billah. 2021. “Flexural response of fiber reinforced concrete beams with waste tires rubber and recycled aggregate.” J. Cleaner Prod. 278 (Jan): 123842. https://doi.org/10.1016/j.jclepro.2020.123842.
Wang, J. J., J. H. Xie, J. H. He, M. W. Sun, J. Yang, and L. J. Li. 2020. “Combined use of silica fume and steel fibre to improve fracture properties of recycled aggregate concrete exposed to elevated temperature.” J. Mater. Cycles Waste Manage. 22 (3): 862–877. https://doi.org/10.1007/s10163-020-00990-y.
Wang, Y., P. Hughes, H. Niu, and Y. Fan. 2019. “A new method to improve the properties of recycled aggregate concrete: Composite addition of basalt fiber and nano-silica.” J. Cleaner Prod. 236 (Nov): 117602. https://doi.org/10.1016/j.jclepro.2019.07.077.
Xiao, J., W. Li, Y. Fan, and X. Huang. 2012. “An overview of study on recycled concrete in China (1996–2011).” Constr. Build. Mater. 31 (Jun): 364–383. https://doi.org/10.1016/j.conbuildmat.2011.12.074.
Xu, F., S. Wang, T. Li, B. Liu, B. B. Li, and Y. Zhou. 2021. “Mechanical properties and pore structure of recycled aggregate concrete made with iron ore tailings and polypropylene fibers.” J. Build. Eng. 33 (Jan): 101572. https://doi.org/10.1016/j.jobe.2020.101572.
Yang, L. Y., H. Z. Xie, S. Z. Fang, C. Huang, A. Y. Yang, and Y. J. Chao. 2021. “Experimental study on mechanical properties and damage mechanism of basalt fiber reinforced concrete under uniaxial compression.” Structures 31 (Jun): 330–340. https://doi.org/10.1016/j.istruc.2021.01.071.
Zhao, Y., B. Xu, and J. Hou. 2020. “Influence of maximum aggregate weight ratio on tensile strength and fracture toughness of concrete.” Mech. Mater. 148 (Sep): 103406. https://doi.org/10.1016/j.mechmat.2020.103406.
Zhu, P., Y. Hao, H. Liu, D. Wei, S. Liu, and L. Gu. 2019. “Durability evaluation of three generations of 100% repeatedly recycled coarse aggregate concrete.” Constr. Build. Mater. 210 (Jun): 442–450. https://doi.org/10.1016/j.conbuildmat.2019.03.203.
Zhu, P., X. Zhang, J. Wu, and X. Wang. 2016. “Performance degradation of the repeated recycled aggregate concrete with 70% replacement of three-generation recycled coarse aggregate.” J. Wuhan Univ. Technol. 31 (5): 989–995. https://doi.org/10.1007/s11595-016-1480-y.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Aug 26, 2021
Accepted: Apr 21, 2022
Published online: Nov 1, 2022
Published in print: Jan 1, 2023
Discussion open until: Apr 1, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Leo Gu Li, Ze-Cheng Lu, Pui-Lam Ng, Zhong-Ping Chen, Xiaowei Deng, Reusing Waste Concrete Recycled Powder in Mortar: Paste Substitution versus Cement Substitution, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-17101, 36, 5, (2024).