Technical Papers
Jun 28, 2022

Effect of Antistripping Additives on the Cohesion, Adhesion, and Performance of Different Asphalt Mixtures in Dry and Wet Conditions

Publication: Journal of Materials in Civil Engineering
Volume 34, Issue 9

Abstract

Most available tests of asphalt mixture performance against moisture damage or the effect of additives examined the asphalt mixture’s overall performance. Considering the different mechanisms of moisture damage, studying antistripping additives’ effect on failure mechanisms might provide a better view of the asphalt mixture’s performance against moisture. Accordingly, herein, the effects of various antistripping additives, including a liquid antistripping additive (dodecylamine) and a nano-magnesium hydroxide additive, each at two bitumen weight percentages, with two types of aggregates with different mineralogical properties and a PG 64-16 bitumen on moisture damage mechanism were investigated. The cohesion and adhesion mechanisms of moisture damage were examined using the pull off test, and the asphalt mixture’s overall performance was assessed using the indirect tensile strength (ITS) test in multiple dry and wet conditions (1, 2, and 3 freeze-thaw cycles) according to the modified Lottman test. The results revealed that the use of 0.4% dodecylamine and 1% nano-magnesium hydroxide in the mixtures made with lime aggregates increases the tensile strength ratio (TSR) from 62.67% to 85.4% and 84.8%, respectively. In mixtures made with granite aggregates, TSR increased from 54.45% to 72.49% and 71.35%, respectively. The failure mechanisms’ assessment showed that the use of 1% nano-magnesium hydroxide in mixtures made with granite aggregate elevated the pull off in the adhesion failure mechanism by 80%, and the pull off increased by 70% in the cohesion failure mechanism. Moreover, the pull off increased by 63% for limestone mixtures in the cohesion failure mechanism and by 56% in the adhesion failure mechanism. The dodecylamine additive with the highest pull off and ITS ratio in all freeze-thaw cycles was more suitable than nano-magnesium hydroxide to promote the asphalt mixtures’ overall performance against moisture. The statistical analysis also indicated the significant effect of dodecylamine and nano-magnesium hydroxide additives on asphalt mixtures’ moisture sensitivity reduction at a 95% confidence level. The findings show that some additives have a stronger effect on adhesion strength and some effect on cohesion strength, but the additive that better improves the overall asphalt mix performance depends on mix design characteristics and aggregate and bitumen type.

Get full access to this article

View all available purchase options and get full access to this article.

Data Availability Statement

No data, models, or code were generated or used during the study.

References

AASHTO. 2015. Standard method of test for determining asphalt binder bond strength by means of the binder bond strength (BBS) test. AASHTO TP91. Washington, DC: AASHTO.
Abdullah, M. E., K. A. Zamhari, N. Nayan, M. R. Hainin, and M. Hermadi. 2011. “Storage stability and physical properties of asphalt modified with nanoclay and warm asphalt additives.” In Proc., 19th Annual Int. Conf. on Composites/Nano Engineering (ICCE-19), 24–30. Shanghai, China: Materials and Nanomaterials Institute.
Aksoy, A., K. Şamlioglu, S. Tayfur, and H. Özen. 2005. “Effects of various additives on the moisture damage sensitivity of asphalt mixtures.” Constr. Build. Mater. 19 (1): 11–18. https://doi.org/10.1016/j.conbuildmat.2004.05.003.
Ameri, M., H. Ziari, A. Yousefi, and A. Behnood. 2021. “Moisture susceptibility of asphalt mixtures: Thermodynamic evaluation of the effects of antistripping additives.” J. Mater. Civ. Eng. 33 (2): 04020457. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003561.
Arabani, M., and G. H. Hamedi. 2011. “Using the surface free energy method to evaluate the effects of polymeric aggregate treatment on moisture damage in hot-mix asphalt.” J. Mater. Civ. Eng. 23 (6): 802–811. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000228.
Arabani, M., and G. H. Hamedi. 2014. “Using the surface free energy method to evaluate the effects of liquid antistrip additives on moisture sensitivity in hot mix asphalt.” Int. J. Pavement Eng. 15 (1): 66–78. https://doi.org/10.1080/10298436.2013.778410.
Arabani, M., Z. Ranjbar Pirbasti, and G. H. Hamedi. 2020. “Evaluation of the effect of dust and soot on runoff acidity and moisture sensitivity of asphalt mixtures using thermodynamic and mechanical methods.” J. Mater. Civ. Eng. 32 (11): 04020313. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003397.
Chaturabong, P., and H. U. Bahia. 2018. “Effect of moisture on the cohesion of asphalt mastics and bonding with surface of aggregates.” Road Mater. Pavement Des. 19 (3): 741–753. https://doi.org/10.1080/14680629.2016.1267659.
Esmaeili, N., G. H. Hamedi, and M. Khodadadi. 2019. “Determination of the stripping process of asphalt mixtures and the effective mix design and SFE parameters on its different phases.” Constr. Build. Mater. 213 (Jul): 167–181. https://doi.org/10.1016/j.conbuildmat.2019.04.043.
Gamelin, F.-X., G. Baquet, S. Berthoin, D. Thevenet, C. Nourry, S. Nottin, and L. Bosquet. 2009. “Effect of high intensity intermittent training on heart rate variability in prepubescent children.” Eur. J. Appl. Physiol. 105 (5): 731–738. https://doi.org/10.1007/s00421-008-0955-8.
Gorkem, C., and B. Sengoz. 2009. “Predicting stripping and moisture induced damage of asphalt concrete prepared with polymer modified bitumen and hydrated lime.” Constr. Build. Mater. 23 (6): 2227–2236. https://doi.org/10.1016/j.conbuildmat.2008.12.001.
Hamedi, G. H., F. Moghadas Nejad, and K. Oveisi. 2015. “Investigating the effects of using nanomaterials on moisture damage of HMA.” Road Mater. Pavement Des. 16 (3): 536–552. https://doi.org/10.1080/14680629.2015.1020850.
Hamedi, G. H., F. M. Nejad, and K. Oveisi. 2016. “Estimating the moisture damage of asphalt mixture modified with nano zinc oxide.” Mater. Struct. 49 (4): 1165–1174. https://doi.org/10.1617/s11527-015-0566-x.
Hamedi, G. H., K. G. Shamami, and M. M. Pakenari. 2020. “Effect of ultra-high-molecular-weight polyethylene on the performance characteristics of hot mix asphalt.” Constr. Build. Mater. 258 (Oct): 119729. https://doi.org/10.1016/j.conbuildmat.2020.119729.
Kanitpong, K., and H. Bahia. 2005. “Relating adhesion and cohesion of asphalts to the effect of moisture on laboratory performance of asphalt mixtures.” Transp. Res. Rec. 1901 (1): 33–43. https://doi.org/10.1177/0361198105190100105.
Kim, Y.-R., J. S. Lutif, A. Bhasin, and D. N. Little. 2008. “Evaluation of moisture damage mechanisms and effects of hydrated lime in asphalt mixtures through measurements of mixture component properties and performance testing.” J. Mater. Civ. Eng. 20 (10): 659–667. https://doi.org/10.1061/(ASCE)0899-1561(2008)20:10(659).
Kumari, L., W. Li, C. H. Vannoy, R. M. Leblanc, and D. Wang. 2009. “Synthesis, characterization and optical properties of Mg (OH) 2 micro-/nanostructure and its conversion to MgO.” Ceram. Int. 35 (8): 3355–3364. https://doi.org/10.1016/j.ceramint.2009.05.035.
Mansour, F., and V. Vahid. 2016. “Effect of Liquid Nano material and hydrated lime in improving the moisture behaviour of HMA.” Transp. Res. Procedia 17 (Jan): 506–512. https://doi.org/10.1016/j.trpro.2016.11.101.
Mirabdolazimi, S., A. Kargari, and M. M. Pakenari. 2021a. “New achievement in moisture sensitivity of nano-silica modified asphalt mixture with a combined effect of bitumen type and traffic condition.” Int. J. Pavement Res. Technol. 14 (1): 105–115. https://doi.org/10.1007/s42947-020-0043-y.
Mirabdolazimi, S. M., M. M. Pakenari, and A. Kargari. 2021b. “Effect of nanosilica on moisture susceptibility of asphalt emulsion mixture.” Arabian J. Sci. Eng. 46 (11): 11139–11151. https://doi.org/10.1007/s13369-021-05696-3.
Mirzababaei, P., F. Moghadas Nejad, and K. Naderi. 2020. “Effect of liquid silane-based anti-stripping additives on rheological properties of asphalt binder and hot mix asphalt moisture sensitivity.” Road Mater. Pavement Des. 21 (2): 570–585. https://doi.org/10.1080/14680629.2018.1507920.
Pilarska, A. A., Ł. Klapiszewski, and T. Jesionowski. 2017. “Recent development in the synthesis, modification and application of Mg (OH) 2 and MgO: A review.” Powder Technol. 319 (Sep): 373–407. https://doi.org/10.1016/j.powtec.2017.07.009.
Qiu, L., R. Xie, P. Ding, and B. Qu. 2003. “Preparation and characterization of Mg (OH) 2 nanoparticles and flame-retardant property of its nanocomposites with EVA.” Compos. Struct. 62 (3–4): 391–395. https://doi.org/10.1016/j.compstruct.2003.09.010.
Sebaaly, P. E., E. Y. Hajj, T. Sathanathan, and S. Shivakolunthar. 2017. “A comprehensive evaluation of moisture damage of asphalt concrete mixtures.” Int. J. Pavement Eng. 18 (2): 169–182. https://doi.org/10.1080/10298436.2015.1065404.
Shen, J., B. Huang, X. Shu, and B. Tang. 2011. “Size effect of sub nano-scaled hydrated lime on selected properties of HMA.” Int. J. Pavement Res. Technol. 4 (4): 252.
Vishal, U., V. Chowdary, A. Padmarekha, and J. Murali Krishnan. 2020. “Influence of moisture damage on fatigue of warm mix and hot mix asphalt mixture.” J. Mater. Civ. Eng. 32 (9): 04020247. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003321.

Information & Authors

Information

Published In

Go to Journal of Materials in Civil Engineering
Journal of Materials in Civil Engineering
Volume 34Issue 9September 2022

History

Received: Oct 11, 2021
Accepted: Jan 14, 2022
Published online: Jun 28, 2022
Published in print: Sep 1, 2022
Discussion open until: Nov 28, 2022

Permissions

Request permissions for this article.

Authors

Affiliations

Assistant Professor, Dept. of Civil Engineering, Univ. of Guilan, P.O. Box 1477893855, Rasht, Islamic Republic of Iran (corresponding author). ORCID: https://orcid.org/0000-0003-4421-3721. Email: [email protected]
Kiumars Ghalandari Shamami [email protected]
M.Sc. Graduated, Dept. of Civil Engineering, Univ. of Guilan, P.O. Box 1477893855, Rasht, Islamic Republic of Iran. Email: [email protected]
Kaveh Ghasemdoost Abadi [email protected]
M.Sc. Graduated, Dept. of Civil Engineering, Univ. of Guilan, P.O. Box 1477893855, Rasht, Islamic Republic of Iran. Email: [email protected]

Metrics & Citations

Metrics

Citations

Download citation

If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.

Cited by

  • Effect of Nano-Cobalt Oxide on the Rheological Behavior of Asphalt Binder and Mechanical Characteristics of Hot Mix Asphalt, Advances in Civil Engineering, 10.1155/2023/7353949, 2023, (1-11), (2023).
  • Assessing the effect of short and long-term aging on moisture damage of hot mix asphalt using two different methods, International Journal of Pavement Engineering, 10.1080/10298436.2023.2168661, 24, 1, (2023).

View Options

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Media

Figures

Other

Tables

Share

Share

Copy the content Link

Share with email

Email a colleague

Share