Effect of Asphalt Mortar Viscoelasticity on Microstructural Fracture Behavior of Asphalt Mixture Based on Cohesive Zone Model
Publication: Journal of Materials in Civil Engineering
Volume 34, Issue 7
Abstract
Racking in asphalt pavements has always been the leading cause of pavement damage. This study aims at investigating the effects of mesostructure characteristics of asphalt mixture on the fracture behavior of semicircular bending (SCB) samples. To fulfill this objective, a two-dimensional (2D) finite-element model (FEM) of an asphalt mixture considering viscoelastic properties was established by using digital image processing (DIP) technology and a cohesive zone model (CZM). The FEM method was validated based on experimental results. On this basis, the whole process of crack initiation and propagation, the damage distribution of cohesive elements, and the effects of mesostructure characteristics (such as voids, interface strength between aggregate and asphalt mortar, and initial crack length) on damage and fracture behavior of SCB samples were analyzed. It was observed that with increasing porosity, the ultimate bearing capacity of the specimen decreased, and the cracks propagated towards the path with more air voids. The air voids far away from the crack propagation path had minimal effect on the ultimate bearing capacity of the specimen but could induce new damaged cohesive elements. With the decrease of the interface strength of aggregate-asphalt mortar, the maximum bearing capacity of the samples decreased, and the proportion of the cohesive elements with more significant damage at the interface increased accordingly. The resulting bearing capacity, fracture energy, and creep dissipation energy of the specimens reduced gradually with increasing initial crack length.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This study was supported by the Fundamental Research Funds for the Central Universities, CHD under Grant No. 300102211505.
References
Adhikari, S., and Z. You. 2011. “Investigating the sensitivity of aggregate size within sand mastic by modeling the microstructure of an asphalt mixture.” J. Mater. Civ. Eng. 23 (5): 580–586. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000212.
Airey, G. D., A. E. Hunter, and A. C. Collop. 2008. “The effect of asphalt mixture gradation and compaction energy on aggregate degradation.” Constr. Build. Mater. 22 (5): 972–980. https://doi.org/10.1016/j.conbuildmat.2006.11.022.
Apeagyei, A. K., J. R. A. Grenfell, and G. D. Airey. 2014. “Observation of reversible moisture damage in asphalt mixtures.” Constr. Build. Mater. 60 (Jun): 73–80. https://doi.org/10.1016/j.conbuildmat.2014.02.033.
Arega, Z. A., A. Bhasin, and T. De Kesel. 2013. “Influence of extended aging on the properties of asphalt composites produced using hot and warm mix methods.” Constr. Build. Mater. 44 (Jul): 168–174. https://doi.org/10.1016/j.conbuildmat.2013.02.081.
Arshadi, A., and H. Bahia. 2015. “Development of an image-based multi-scale finite-element approach to predict mechanical response of asphalt mixtures.” Road Mater. Pavement Des. 16 (Aug): 214–229. https://doi.org/10.1080/14680629.2015.1077007.
Castillo, D., S. Caro, M. Darabi, and E. Masad. 2018. “Influence of aggregate morphology on the mechanical performance of asphalt mixtures.” Road Mater. Pavement Des. 19 (4): 972–991. https://doi.org/10.1080/14680629.2017.1283357.
Chen, J., H. Wang, H. Dan, and Y. Xie. 2018. “Random modeling of three-dimensional heterogeneous microstructure of asphalt concrete for mechanical analysis.” J. Eng. Mech. 144 (9): 04018083. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001505.
Coenen, A. R., M. E. Kutay, N. R. Sefidmazgi, and H. U. Bahia. 2012. “Aggregate structure characterisation of asphalt mixtures using two-dimensional image analysis.” Road Mater. Pavement Des. 13 (3): 433–454. https://doi.org/10.1080/14680629.2012.711923.
Ding, B., X. Zou, Z. Peng, and X. Liu. 2018a. “Evaluation of fracture resistance of asphalt mixtures using the single-edge notched beams.” Adv. Mater. Sci. Eng. 2018 (3): 1–9. https://doi.org/10.1155/2018/8026798.
Ding, H., J. Gyasi, S. A. Hesp, P. Marks, Y. Nie, M. Somuah, S. Tabib, N. Tetteh, and I. Ubaid. 2018b. “Performance grading of extracted and recovered asphalt cements.” Constr. Build. Mater. 187 (Oct): 996–1003. https://doi.org/10.1016/j.conbuildmat.2018.07.243.
Ding, H., Y. Qiu, and A. Rahman. 2019. “Low-temperature reversible aging properties of selected asphalt binders based on thermal analysis.” J. Mater. Civ. Eng. 31 (3): 04018402. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002625.
Ding, H., Y. Qiu, and A. Rahman. 2020. “Influence of thermal history on the intermediate and low-temperature reversible aging properties of asphalt binders.” Road Mater. Pavement Des. 21 (8): 2126–2142. https://doi.org/10.1080/14680629.2019.1593227.
Falchetto, A. C., K. H. Moon, C. B. Lee, and M. P. Wistuba. 2017. “Correlation of low temperature fracture and strength properties between SCB and IDT tests using a simple 2D FEM approach.” Road Mater. Pavement Des. 18 (May): 329–338. https://doi.org/10.1080/14680629.2017.1304258.
Falchetto, A. C., K. H. Moon, D. Wang, C. Riccardi, and M. P. Wistuba. 2018. “Comparison of low-temperature fracture and strength properties of asphalt mixture obtained from IDT and SCB under different testing configurations.” Road Mater. Pavement Des. 19 (3): 591–604. https://doi.org/10.1080/14680629.2018.1418722.
Kim, H., M. P. Wagoner, and W. G. Buttlar. 2009. “Micromechanical fracture modeling of asphalt concrete using a single-edge notched beam test.” Mater. Struct. 42 (5): 677–689. https://doi.org/10.1617/s11527-008-9412-8.
Kim, Y.-R., F. A. C. de Freitas, J. S. Jung, and Y. Sim. 2015. “Characterization of bitumen fracture using tensile tests incorporated with viscoelastic cohesive zone model.” Constr. Build. Mater. 88 (Jul): 1–9. https://doi.org/10.1016/j.conbuildmat.2015.04.002.
Kim, Y.-R., and F. T. Sacramento Aragao. 2013. “Microstructure modeling of rate-dependent fracture behavior in bituminous paving mixtures.” Finite Elem. Anal. Des. 63 (Jan): 23–32. https://doi.org/10.1016/j.finel.2012.08.004.
Kollmann, J., P. Liu, G. Lu, D. Wang, M. Oeser, and S. Leischner. 2019a. “Investigation of the microstructural fracture behaviour of asphalt mixtures using the finite element method.” Constr. Build. Mater. 227 (Dec): 117078. https://doi.org/10.1016/j.conbuildmat.2019.117078.
Kollmann, J., G. Lu, P. Liu, Q. Xing, D. Wang, M. Oeser, and S. Leischner. 2019b. “Parameter optimisation of a 2D finite element model to investigate the microstructural fracture behaviour of asphalt mixtures.” Theor. Appl. Fract. Mech. 103 (3): 102319. https://doi.org/10.1016/j.tafmec.2019.102319.
Liu, P., J. Hu, D. Wang, M. Oeser, S. Alber, W. Ressel, and G. C. Falla. 2017a. “Modelling and evaluation of aggregate morphology on asphalt compression behavior.” Constr. Build. Mater. 133 (Feb): 196–208. https://doi.org/10.1016/j.conbuildmat.2016.12.041.
Liu, P., J. Hu, H. Wang, G. C. Falla, D. Wang, and M. Oeser. 2018a. “Influence of temperature on the mechanical response of asphalt mixtures using microstructural analysis and finite-element simulations.” J. Mater. Civ. Eng. 30 (12): 04018327. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002531.
Liu, P., D. Wang, and M. Oeser. 2017b. “Application of semi-analytical finite element method to analyze asphalt pavement response under heavy traffic loads.” J. Traffic Transp. Eng. English Ed. 4 (2): 206–214. https://doi.org/10.1016/j.jtte.2017.03.003.
Liu, P., Q. Xing, D. Wang, and M. Oeser. 2017c. “Application of dynamic analysis in semi-analytical finite element method.” Materials (Basel) 10 (9): 1010. https://doi.org/10.3390/ma10091010.
Liu, P., Q. Xing, D. Wang, and M. Oeser. 2018b. “Application of linear viscoelastic properties in semianalytical finite element method with recursive time integration to analyze asphalt pavement structure.” Adv. Civ. Eng. 2018 (1): 1–15. https://doi.org/10.1155/2018/9045820.
Lo Presti, D., R. Khan, N. A. Hassan, G. Airey, and A. Collop. 2014. “Laboratory mix design of asphalt mixture containing reclaimed material.” Adv. Mater. Sci. Eng. 2014 (507082): 653–659. https://doi.org/10.1155/2014/507082.
Moriyoshi, A., N. Takahashi, O. Ikeda, M. Kawashima, and T. Akabane. 2013. “Strain distribution in asphalt mixtures during the wheel tracking test at high temperatures.” Constr. Build. Mater. 40 (Mar): 1128–1135. https://doi.org/10.1016/j.conbuildmat.2012.11.040.
Qiu, Y., H. Ding, A. Rahman, and E. Yang. 2020a. “Using combined Avrami-Ozawa method to evaluate low-temperature reversible aging in asphalt binders.” Road Mater. Pavement Des. 21 (1): 78–93. https://doi.org/10.1080/14680629.2018.1479291.
Qiu, Y., H. Ding, and T. Su. 2020b. “Non-isothermal low-temperature reversible aging of commercial wax-based warm mix asphalts.” Int. J. Pavement Eng. 8: 1–9. https://doi.org/10.1080/10298436.2020.1757670.
Qiu, Y., H. Ding, and P. Zheng. 2020c. “Toward a better understanding of the low-temperature reversible aging phenomenon in asphalt binder.” Int. J. Pavement Eng. 62: 1–10. https://doi.org/10.1080/10298436.2020.1740926.
Rami, K. Z., S. Amelian, Y.-R. Kim, T. You, and D. N. Little. 2017. “Modeling the 3D fracture-associated behavior of viscoelastic asphalt mixtures using 2D microstructures.” Eng. Fract. Mech. 182 (Sep): 86–99. https://doi.org/10.1016/j.engfracmech.2017.07.015.
Sefidmazgi, N. R., and H. U. Bahia. 2014. “Effect of compaction conditions on aggregate packing using 2-dimensional image analysis and the relation to performance of HMA.” Mater. Struct. 47 (8): 1313–1324. https://doi.org/10.1617/s11527-014-0275-x.
Sefidmazgi, N. R., L. Tashman, and H. Bahia. 2012. “Internal structure characterization of asphalt mixtures for rutting performance using imaging analysis.” Road Mater. Pavement Des. 13 (Jun): 21–37. https://doi.org/10.1080/14680629.2012.657045.
Shen, D. H., M. F. Kuo, and J. C. Du. 2005. “Properties of gap-aggregate gradation asphalt mixture and permanent deformation.” Constr. Build. Mater. 19 (2): 147–153. https://doi.org/10.1016/j.conbuildmat.2004.05.005.
Wang, H., C. Wang, Z. You, X. Yang, and Z. Huang. 2018a. “Characterising the asphalt concrete fracture performance from X-ray CT Imaging and finite element modelling.” Int. J. Pavement Eng. 19 (3): 307–318. https://doi.org/10.1080/10298436.2017.1347440.
Wang, H., J. Wang, and J. Chen. 2014. “Micromechanical analysis of asphalt mixture fracture with adhesive and cohesive failure.” Eng. Fract. Mech. 132 (Dec): 104–119. https://doi.org/10.1016/j.engfracmech.2014.10.029.
Wang, H., J. Wang, and J. Chen. 2018b. “Fracture simulation of asphalt concrete with randomly generated aggregate microstructure.” Road Mater. Pavement Des. 19 (7): 1674–1691. https://doi.org/10.1080/14680629.2017.1345778.
Yin, A., X. Yang, H. Gao, and H. Zhu. 2012. “Tensile fracture simulation of random heterogeneous asphalt mixture with cohesive crack model.” Eng. Fract. Mech. 92 (Sep): 40–55. https://doi.org/10.1016/j.engfracmech.2012.05.016.
Yin, A., X. Yang, G. Zeng, and H. Gao. 2014. “Fracture simulation of pre-cracked heterogeneous asphalt mixture beam with movable three-point bending load.” Constr. Build. Mater. 65 (Aug): 232–242. https://doi.org/10.1016/j.conbuildmat.2014.04.119.
Yin, A., X. Yang, G. Zeng, and H. Gao. 2015a. “Experimental and numerical investigation of fracture behavior of asphalt mixture under direct shear loading.” Constr. Build. Mater. 86 ((Jul): 21–32. https://doi.org/10.1016/j.conbuildmat.2015.03.099.
Yin, A., X. Yang, C. Zhang, G. Zeng, and Z. Yang. 2015b. “Three-dimensional heterogeneous fracture simulation of asphalt mixture under uniaxial tension with cohesive crack model.” Constr. Build. Mater. 76 (Feb): 103–117. https://doi.org/10.1016/j.conbuildmat.2014.11.065.
Zhao, Y., J. Jiang, L. Zhou, and F. Ni. 2020a. “Improving the calculation accuracy of FEM for asphalt mixtures in simulation of SCB test considering the mesostructure characteristics.” Int. J. Pavement Eng. 23 (1): 1–15. https://doi.org/10.1080/10298436.2020.1733566.
Zhao, Y., L. Jiang, J. Jiang, and F. Ni. 2020b. “Accuracy improvement for two-dimensional finite-element modeling while considering asphalt mixture meso-structure characteristics in indirect tensile test simulation.” J. Mater. Civ. Eng. 32 (10): 04020275. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003359.
Zhao, Y., F. Ni, L. Zhou, and J. Jiang. 2017. “Heterogeneous fracture simulation of asphalt mixture under SCB test with cohesive crack model.” Road Mater. Pavement Des. 18 (6): 1411–1422. https://doi.org/10.1080/14680629.2016.1230071.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Aug 6, 2021
Accepted: Nov 1, 2021
Published online: Apr 20, 2022
Published in print: Jul 1, 2022
Discussion open until: Sep 20, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Tuo Huang, Zhaoyang Wang, Hongwu Dong, Haoyun Qin, Hongfu Liu, Zhonglu Cao, Time-Temperature-Stress Equivalent Characteristics and Nonlinear Viscoelastic Model of Asphalt Mixture under Triaxial Compressive Stress State, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-16679, 36, 2, (2024).
- Yunlian Song, Yu Sun, Low-Temperature Crack Resistance of Basalt Fiber-Reinforced Phase-Change Asphalt Mixture Based on Digital-Image Correlation Technology, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-15265, 35, 6, (2023).
- Haopeng Zhang, Yanjun Qiu, Investigation of wax inhibition efficiency based on alkane structures in model asphalt for sustainable utilization of wax inhibitors, Journal of Molecular Liquids, 10.1016/j.molliq.2023.121353, 375, (121353), (2023).
- Fei Liu, Baofeng Pan, Jiaruo Bian, Changjun Zhou, Experimental investigation on the performance of the asphalt mixture with ceramic fiber, Journal of Cleaner Production, 10.1016/j.jclepro.2022.135585, 384, (135585), (2023).
- Dongdong Han, Guoqiang Liu, Tao Yang, Yichang Xie, Yongli Zhao, A phase-field cohesive zone model for fracture simulation of asphalt mixture, Engineering Fracture Mechanics, 10.1016/j.engfracmech.2023.109149, 281, (109149), (2023).
- Haopeng Zhang, Qingshan Xie, Haibo Ding, Yanjun Qiu, Inhibiting wax precipitation in asphalt binder from perspective of dispersing asphaltenes, Construction and Building Materials, 10.1016/j.conbuildmat.2023.130662, 370, (130662), (2023).
- Haopeng Zhang, Hong Zhang, Haibo Ding, Enhui Yang, Yanjun Qiu, Thermal stress calculation of wax-based warm mix asphalt considering thermorheologically complex behavior, Construction and Building Materials, 10.1016/j.conbuildmat.2023.130488, 368, (130488), (2023).
- Jiaqi Chen, Xu Ouyang, Xiao Sun, Numerical Investigation of Asphalt Concrete Fracture Based on Heterogeneous Structure and Cohesive Zone Model, Applied Sciences, 10.3390/app122111150, 12, 21, (11150), (2022).
- Enhui Yang, Qinlong Yang, Jie Li, Haopeng Zhang, Haibo Di, Yanjun Qiu, Establishment of icing prediction model of asphalt pavement based on support vector regression algorithm and Bayesian optimization, Construction and Building Materials, 10.1016/j.conbuildmat.2022.128955, 351, (128955), (2022).
- Tao Li, Guanghui Zhao, Guolu Zhang, Litong Wang, Study on progressive damage performance of basalt‐fiber wound composite tube, Polymer Composites, 10.1002/pc.26933, 43, 11, (7977-7991), (2022).