Implementation of the Linear Amplitude Sweep Test to Evaluate Fatigue Resistance of Highly Polymerized Asphalt Binders
Publication: Journal of Materials in Civil Engineering
Volume 34, Issue 5
Abstract
Highly polymerized asphalt binders (HPABs) such as PG 64-40 have been increasingly used in cold regions such as Alaska in recent years. However, there are currently considerable data gaps when it comes to the characterizations of the HPABs, especially their fatigue behaviors. The objective of this study is to apply the linear amplitude sweep (LAS) test with the viscoelastic continuum damage (VECD) model to assess the fatigue resistance of HPABs. Three HPABs (PG 52-40, PG 64-40, and PG 52-46) and one unmodified binder (PG 52-28) were used in the study. The fatigue failure during LAS tests on HPABs was defined, and an analysis protocol using the VECD model was proposed based on the experimental results. The analysis protocol was validated by the agreements of the predicted and measured number of cycles to failure in the time sweep (TS) test. The results indicated that the LAS test with the selected analysis protocol can effectively predict the fatigue lives of HPABs. Both the LAS and TS test results showed that the HPABs had higher fatigue resistance than the unmodified asphalt binder. Among the four binders, the PG 64-40 binder exhibited the longest fatigue lives under repeated loadings.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This study was funded by the ADOT&PF and Center for Environmentally Sustainable Transportation in Cold Climates (CESTiCC). The authors gratefully acknowledge the ADOT&PF and CESTiCC for their financial support.
References
AASHTO. 2017. Standard method of test for determining the fatigue life of compacted asphalt mixtures subjected to repeated flexural bending. AASHTO T 321. Washington, DC: AASHTO.
AASHTO. 2020. Standard method of test for estimating fatigue resistance of asphalt binders using the linear amplitude sweep. AASHTO T 391. Washington, DC: AASHTO.
AASHTO. 2021a. Standard method of test for effect of heat and air on a moving film of asphalt binder (rolling thin-film oven test). AASHTO T 240. Washington, DC: AASHTO.
AASHTO. 2021b. Standard practice for accelerated aging of asphalt binder using a pressurized aging vessel (PAV). AASHTO R 28. Washington, DC: AASHTO.
Abdollahi, S. F., M. Farrokhi, and N. Tabatabaee. 2020. “Development of a computer program for calculation of the alpha parameter in the linear amplitude sweep test and comparison with rheological parameters.” Transp. Res. Rec. 2674 (7): 284–298. https://doi.org/10.1177/0361198120922042.
Ameri, M., M. Reza Seif, M. Abbasi, and A. Khavandi Khiavi. 2017. “Viscoelastic fatigue resistance of asphalt binders modified with crumb rubber and styrene butadiene polymer.” Pet. Sci. Technol. 35 (1): 30–36. https://doi.org/10.1080/10916466.2016.1233246.
Anderson, D. A., Y. M. Le Hir, M. O. Marasteanu, J. P. Planche, D. Martin, and G. Gauthier. 2001. “Evaluation of fatigue criteria for asphalt binders.” Transp. Res. Rec. 1766 (1): 48–56. https://doi.org/10.3141/1766-07.
Anderson, R. M., G. N. King, D. I. Hanson, and P. B. Blankenship. 2011. “Evaluation of the relationship between asphalt binder properties and non-load related cracking.” J. Assoc. Asphalt Paving Technol. 80: 615–663.
Bahia, H. U., D. I. Hanson, M. Zeng, H. Zhai, M. A. Khatri, and R. M. Anderson. 2001. Characterization of modified asphalt binders in Superpave mix design. Washington, DC: National Research Council.
Brown, E. R., P. S. Kandhal, F. L. Roberts, Y. R. Kim, D. Y. Lee, and T. W. Kennedy. 2009. Hot mix asphalt materials, mixture design, and construction. 3rd ed. Lanham, MS: NAPA Research and Education Foundation.
Cao, W., L. N. Mohammad, and P. Barghabany. 2018. “Use of viscoelastic continuum damage theory to correlate fatigue resistance of asphalt binders and mixtures.” Int. J. Geomech. 18 (11): 04018151. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001306.
Cao, W., and C. Wang. 2018. “A new comprehensive analysis framework for fatigue characterization of asphalt binder using the linear amplitude sweep test.” Constr. Build. Mater. 171 (May): 1–12. https://doi.org/10.1016/j.conbuildmat.2018.03.125.
Castelo Branco, V. T., E. Masad, A. Bhasin, and D. N. Little. 2008. “Fatigue analysis of asphalt mixtures independent of mode of loading.” Transp. Res. Rec. 2057 (1): 149–156. https://doi.org/10.3141/2057-18.
Hasan, M. A., M. M. Hasan, B. K. Bairgi, U. A. Mannan, and R. A. Tarefder. 2019. “Utilizing simplified viscoelastic continuum damage model to characterize the fatigue behavior of styrene-butadiene-styrene (SBS) modified binders.” Constr. Build. Mater. 200 (Mar): 159–169. https://doi.org/10.1016/j.conbuildmat.2018.12.048.
Hintz, C., and H. Bahia. 2013. “Simplification of linear amplitude sweep test and specification parameter.” Transp. Res. Rec. 2370 (1): 10–16. https://doi.org/10.3141/2370-02.
Hintz, C., R. Velasquez, C. Johnson, and H. Bahia. 2011. “Modification and validation of linear amplitude sweep test for binder fatigue specification.” Transp. Res. Rec. 2207 (1): 99–106. https://doi.org/10.3141/2207-13.
Johnson, C. M. 2010. “Estimating asphalt binder fatigue resistance using an accelerated test method.” Ph.D. dissertation, Dept. of Civil and Environmental Engineering, Univ. of Wisconsin-Madison.
Kim, Y. R., and D. N. Little. 1990. “One-dimensional constitutive modeling of asphalt concrete.” J. Eng. Mech. 116 (4): 751–772. https://doi.org/10.1061/(ASCE)0733-9399(1990)116:4(751).
Liu, J., and J. Liu. 2019. Laboratory and field evaluation of modified asphalt binders and mixes for Alaskan pavements. Juneau, AK: Alaska DOT & Public Facilities.
Liu, J., J. Liu, A. Zhu, and S. Saboundjian. 2020. “Evaluation of multiple stress-creep recovery test on Alaskan asphalt binders.” J. Mater. Civ. Eng. 32 (10): 04020302. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003337.
Liu, J., K. Yan, and J. Liu. 2018. “Rheological characteristics of polyphosphoric acid–modified asphalt mastic.” J. Mater. Civ. Eng. 30 (12): 06018021. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002555.
Marasteanu, M. O., and D. A. Anderson. 1999. “Improved model for bitumen rheological characterization.” In Vol. 133 of Eurobitume workshop on performance related properties for bituminous binders. Brussels, Belgium: European Bitumen Association.
Notani, M. A., F. Moghadas Nejad, A. Khodaii, and P. Hajikarimi. 2019. “Evaluating fatigue resistance of toner-modified asphalt binders using the linear amplitude sweep test.” Road Mater. Pavement Des. 20 (8): 1927–1940. https://doi.org/10.1080/14680629.2018.1474792.
Sabouri, M., and Y. R. Kim. 2014. “Development of a failure criterion for asphalt mixtures under different modes of fatigue loading.” Transp. Res. Rec. 2447 (1): 117–125. https://doi.org/10.3141/2447-13.
Safaei, F., C. Castorena, and Y. R. Kim. 2016. “Linking asphalt binder fatigue to asphalt mixture fatigue performance using viscoelastic continuum damage modeling.” Mech. Time-Depend. Mater. 20 (3): 299–323. https://doi.org/10.1007/s11043-016-9304-1.
Safaei, F., J. S. Lee, L. A. H. D. Nascimento, C. Hintz, and Y. R. Kim. 2014. “Implications of warm-mix asphalt on long-term oxidative ageing and fatigue performance of asphalt binders and mixtures.” Supplement, Road Mater. Pavement Des. 15 (S1): 45–61. https://doi.org/10.1080/14680629.2014.927050.
Schapery, R. A. 1984. “Correspondence principles and a generalized integral for large deformation and fracture analysis of viscoelastic media.” Int. J. Fract. 25 (3): 195–223. https://doi.org/10.1007/BF01140837.
Shan, L., X. Qi, X. Duan, S. Liu, and J. Chen. 2020. “Effect of styrene-butadiene-styrene (SBS) on the rheological behavior of asphalt binders.” Constr. Build. Mater. 231 (Jan): 117076. https://doi.org/10.1016/j.conbuildmat.2019.117076.
Shenoy, A. 2002. “Fatigue testing and evaluation of asphalt binders using the dynamic shear rheometer.” J. Test. Eval. 30 (4): 303–312. https://doi.org/10.1520/JTE12320J.
Underwood, B. S., C. Baek, and Y. R. Kim. 2012. “Simplified viscoelastic continuum damage model as platform for asphalt concrete fatigue analysis.” Transp. Res. Rec. 2296 (1): 36–45. https://doi.org/10.3141/2296-04.
Wang, C., C. Castorena, J. Zhang, and Y. Richard Kim. 2015. “Unified failure criterion for asphalt binder under cyclic fatigue loading.” Supplement, Road Mater. Pavement Des. 16 (S2): 125–148. https://doi.org/10.1080/14680629.2015.1077010.
Wang, Y. D., B. Keshavarzi, and Y. R. Kim. 2018. “Fatigue performance predictions of asphalt pavements using FlexPAVE with the S-VECD model and failure criterion.” Transp. Res. Rec. 2672 (40): 217–227. https://doi.org/10.1177/0361198118756873.
Wang, Y. D., and Y. R. Kim. 2017. “Development of a pseudo strain energy-based fatigue failure criterion for asphalt mixtures.” Int. J. Pavement Eng. 20 (10): 1182–1192. https://doi.org/10.1080/10298436.2017.1394100.
Wang, Y. D., B. S. Underwood, and Y. R. Kim. 2020. “Development of a fatigue index parameter, , for asphalt mixes using viscoelastic continuum damage theory.” Int. J. Pavement Eng. https://doi.org/10.1080/10298436.2020.1751844.
Zhang, J., M. Sabouri, M. N. Guddati, and Y. R. Kim. 2013. “Development of a failure criterion for asphalt mixtures under fatigue loading.” Supplement, Pavement Des. 14 (S2): 1–15. https://doi.org/10.1080/14680629.2013.812843.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: May 24, 2021
Accepted: Sep 21, 2021
Published online: Feb 24, 2022
Published in print: May 1, 2022
Discussion open until: Jul 24, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Peng Yin, Baofeng Pan, Zihan Li, Damage Mechanism of Asphalt Binder Modified with Phosphogypsum Whisker Composite under the Action of Sea Salt Solution, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-18102, 36, 8, (2024).
- Yutong Liu, Zeliang Yang, Hui Luo, Effects of Anhydrous Calcium Sulfate Whisker and Waste Engine Oil on Performance of Asphalt Binder and Its Mixture, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-16488, 36, 2, (2024).
- Aakash Singh, Ankit Gupta, Miomir Miljković, Intermediate- and high-temperature damage of bitumen modified by HDPE from various sources, Road Materials and Pavement Design, 10.1080/14680629.2023.2181017, (1-14), (2023).
- Yuetan Ma, Yongjie Ding, Kunpeng Zheng, Pawel Polaczyk, Miaomiao Zhang, Rui Xiao, Baoshan Huang, Effects of Immobilized RAP Binder on Asphalt-Aggregate Interaction and Performance of 100% Recycled Asphalt Mixtures, Journal of Materials in Civil Engineering, 10.1061/(ASCE)MT.1943-5533.0004659, 35, 4, (2023).
- Jiachen Shi, Hongren Gong, Fan Yang, Haimei Liang, Lin Cong, Image Processing of Aggregate Skeleton Structure of Asphalt Mixture for Aggregate Uniformity Quantification, Journal of Materials in Civil Engineering, 10.1061/(ASCE)MT.1943-5533.0004559, 35, 1, (2023).
- Ke Shi, Zhen Fu, Feng Ma, Jun Liu, Ruimeng Song, Jiarong Li, Jiasheng Dai, Chen Li, Yalu Wen, Development on the Rheological Properties and Micromorphology of Active Reagent-Rejuvenated SBS-Modified Asphalt, ACS Sustainable Chemistry & Engineering, 10.1021/acssuschemeng.2c05008, 10, 50, (16734-16751), (2022).
- Wenyao Liu, Kezhan Yan, Hongyan Ji, Bonding performance evaluation on WTR-APAO composite modified asphalt as waterproof adhesive layer for concrete bridge, Construction and Building Materials, 10.1016/j.conbuildmat.2022.128667, 349, (128667), (2022).