Diffusion Resistance to Two Opposite-Side Chloride Ions of Concrete Based on the Diffusion Constant
Publication: Journal of Materials in Civil Engineering
Volume 34, Issue 5
Abstract
A new theoretical calculation method for the two opposite-side chloride diffusions was established, which is different from traditional diffusion calculations and the value-taking rule of error function. A new parameter, , a diffuse constant of the object being diffused, is proposed to reflect the internal diffusion characteristics of the object, and the concrete studied in this paper has a value between 2 and 3—closer to 3. By performing comparison experiments with a stronger effect of superposition and accumulation in concrete under two opposite-side chloride ion, diffusion can be found, which is consistent with the calculation results. In order to improve the resistance of concrete to two opposite-side chloride codiffusion, the concrete modified by nanosilica and nanotitania was designed in this study. Due to its excellent microstructure and porosity properties, the concrete modified by nanosilica at 1.5% and nanotitania at 0.5% cement weight showed an excellent resistance to the single-side chloride ion diffusion, and the same goes for two opposite-side diffusions.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article. Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The research is supported by the National Natural Science Foundation of China (NSFC) (Grant No. 41977230); the National Key Research and Development Project (Grant Nos. 2017YFC1501203 and 2017YFC1501201); the Special Fund Key Project of Applied Science and Technology Research and Development in Guangdong (Grant No. 2015B090925016 and 2016B010124007); the Research Foundation of Education Bureau of Hunan Province (Grant Nos. 16C0439, 16C0431, and 19C0519); Science and Technology Plan Project of Hengyang City, China (Grant No. 2019jh010652); Hunan Institute of Technology Undergraduate Teaching Engineering Construction Project, China (Grant No. AX1807); and Hunan Institute of Technology Undergraduate Research-Based Learning and Innovative Experimental Program, China (Grant Nos. HGDC1816 and HGDC1841).
References
ACI (American Concrete Institute). 2001. “Control of cracking in concrete structures.” ACI Committee 224 (Jan): 224.
Angst, U., B. Elsener, and C. K. Larsen. 2009. “Vennesland critical chloride content in reinforced concrete—A review.” Cem. Concr. Res. 39 (5): 1122–1138. https://doi.org/10.1016/j.cemconres.2009.08.006.
Ann, K. Y., J. H. Ahn, and J. S. Ryou. 2009. “The importance of chloride content at the concrete surface in assessing the time to corrosion of steel in concrete structures.” Constr. Build. Mater. 23 (4): 239–245. https://doi.org/10.1016/j.conbuildmat.2007.12.014.
ASTM. 2012. Standard test method for acid-soluble chloride in mortar and concrete. West Conshohocken, PA: ASTM.
Avril, S., A. Vautrin, P. Hamelin, and Y. Surrel. 2005. “A multi-scale approach for crack width prediction in reinforced-concrete beams repaired with composites.” Compos. Sci. Technol. 65 (3–4): 445–453. https://doi.org/10.1016/j.compscitech.2004.09.026.
Buratti, N., B. Ferracuti, and M. Savoia. 2013. “Concrete crack reduction in tunnel linings by steel fibre-reinforced concretes.” Constr. Build. Mater. 44 (1): 249–259. https://doi.org/10.1016/j.conbuildmat.2013.02.063.
Correia, J., J. Brito, and A. Pereira. 2006. “Effects on concrete durability of using recycled ceramic aggregates.” Mater. Struct. 39 (2): 169–177. https://doi.org/10.1617/s11527-005-9014-7.
Crank, J. 1975. The mathematics of diffusion. London: Oxford Press.
Gjørv, O. E. 2016. “Durability design and sustainability of new major concrete infrastructure.” J. Sustainable Cem. Based Mater. 5 (1): 269–282. https://doi.org/10.1080/21650373.2016.1169231.
Gjørv, O. E., and Ø. Vennesland. 1979. “Diffusion of chloride ions from seawater into concrete.” Cem. Concr. Res. 9 (2): 229–238. https://doi.org/10.1016/0008-8846(79)90029-2.
Han, S. H., W. S. Park, and E. I. Yang. 2013. “Evaluation of concrete durability due to carbonation in harbor concrete structures.” Constr. Build. Mater. 48 (Jan): 1045–1049. https://doi.org/10.1016/j.conbuildmat.2013.07.057.
Idiart, A. E., C. M. López, and I. Carol. 2011. “Chemo-mechanical analysis of concrete cracking and degradation due to external sulfate attack: A meso-scale model.” Cem. Concr. Compos. 33 (3): 411–423. https://doi.org/10.1016/j.cemconcomp.2010.12.001.
Keck, R. H. 2001. “Improving concrete durability with cementitious materials.” Concr. Int. 23 (9): 47–51.
Li, H., H. G. Xiao, X. C. Guan, Z. T. Wang, and L. Yu. 2014. “Chloride diffusion in concrete containing nano- under coupled effect of scouring.” Compos. Part B 56 (Apr): 698–704. https://doi.org/10.1016/j.compositesb.2013.09.024.
Liu, H. K., N. H. Tai, and W. H. Lee. 2002. “Effect of seawater on compressive strength of concrete cylinders reinforced by non-adhesive wound hybrid polymer composites.” Compos. Sci. Technol. 62 (16): 2131–2141. https://doi.org/10.1016/S0266-3538(02)00153-7.
Liu, R., H. G. Xiao, H. Li, L. Sun, Z. Y. Pi, G. Q. Waqar, T. Du, and L. Yu. 2018. “Effects of nanosilica on the permeability-related properties of cement-based composites with different water/cement ratios.” J. Mater. Sci. 53 (7):4974–4986. https://doi.org/10.1007/s10853-017-1906-8.
Mehta, P. K. 1983. “Mechanism of sulfate attack on portland cement concrete—Another look.” Cem. Concr. Res. 13 (Apr): 401–406. https://doi.org/10.1016/0008-8846(83)90040-6.
Monteiro, P. J. M., A. P. Kirchheim, S. Chae, P. Fischer, A. A. MacDowell, E. Schaible, and H. R. Wenk. 2009. “Characterizing the nano and micro structure of concrete to improve its durability.” Cem. Concr. Compos. 31 (8): 577–584. https://doi.org/10.1016/j.cemconcomp.2008.12.007.
Mukhopadhyay, A. K. 2011. “Next-generation nano-based concrete construction products: A review.” Nanotechnol. Civ. Infrastruct. 2011 (1): 207–223.
Rodrguezcamacho, R. E., and R. Uribeafif. 2002. “Importance of using the natural pozzolans on concrete durability.” Cem. Concr. Res. 32 (1): 1851–1858.
Scarfato, P., L. D. Maio, M. L. Fariello, P. Russo, and L. Incarnato. 2012. “Preparation and evaluation of polymer/clay nanocomposite surface treatments for concrete durability enhancement.” Cem. Concr. Compos. 34 (11): 297–305. https://doi.org/10.1016/j.cemconcomp.2011.11.006.
Scheffler, C., S. L. Gao, R. Plonka, E. Mäder, S. Hempel, M. Butler, and V. Mechtcherine. 2009. “Interphase modification of alkali-resistant glass fibres and carbon fibres for textile reinforced concrete I: Fibre properties and durability.” Compos. Sci. Technol. 69 (3–4): 531–538. https://doi.org/10.1016/j.compscitech.2008.11.027.
Shaikh, F. U. A., and S. W. M. Supit. 2015. “Chloride induced corrosion durability of high volume fly ash concretes containing nano particles.” Constr. Build. Mater. 99 (Jan): 208–225. https://doi.org/10.1016/j.conbuildmat.2015.09.030.
Shi, X., X. Ning, K. Fortune, and J. Gong. 2012. “Durability of steel reinforced concrete in chloride environments: An overview.” Constr. Build. Mater. 30 (May): 125–138. https://doi.org/10.1016/j.conbuildmat.2011.12.038.
Thomas, M. 1996. “Chloride thresholds in marine concrete.” Cem. Concr. Res. 26 (4): 513–519. https://doi.org/10.1016/0008-8846(96)00035-X.
Vaghela, A. R., and G. R. Vesmawala. 2018. “Mechanical properties of nano concrete.” Adv. Struct. Integr. 2018 (1): 137–145.
Ying, J. W., B. Zhou, and J. Z. Xiao. 2017. “Pore structure and chloride diffusivity of recycled aggregate concrete with nano- and nano-TiO2.” Constr. Build. Mater. 150 (Jan): 49–55. https://doi.org/10.1016/j.conbuildmat.2017.05.168.
Yu, L., and F. Xu. 2020. “Bilateral chloride diffusion model of nanocomposite concrete in marine engineering.” Constr. Build. Mater. 263 (Apr): 120634. https://doi.org/10.1016/j.conbuildmat.2020.120634.
Yu, L., C. Y. Zhou, Z. Liu, F. Xu, W. X. Liu, H. Y. Zeng, and C. H. Liu. 2019. “Scouring abrasion properties of nanomodified concrete under the action of chloride diffusion.” Constr. Build. Mater. 208 (May): 296–303. https://doi.org/10.1016/j.conbuildmat.2019.02.161.
Yue, Z. W., J. P. Li, B. Yang, W. Shao, and T. Lv. 2014. “Solve chloride ions diffusion problem by separation variable method for reinforced concrete slab in marine environment.” J. Chinese Soc. Corrosion Protect. 34 (1): 95–100.
Zhang, B. L., H. B. Tan, W. G. Shen, G. L. Xu, B. G. Ma, and X. L. Ji. 2018. “Nano-silica and silica fume modified cement mortar used as Surface Protection Material to enhance the impermeability.” Cem. Concr. Compos. 92 (Sep): 7–17. https://doi.org/10.1016/j.cemconcomp.2018.05.012.
Zhang, T., and O. E. Gjørv. 1996. “Diffusion behavior of chloride ions in concrete.” Cem. Concr. Res. 26 (6): 907–917. https://doi.org/10.1016/0008-8846(96)00069-5.
Zhao, J. Q., M. Zhou, Q. M. Jiang, J. M. Fang, and Q. Y. Ge. 2019. “Analytical solution for chloride ions bilateral diffusion.” IOP Conf. Series-Earth Environ. Sci. 218 (1): 012018. https://doi.org/10.1088/1755-1315/218/1/012018.
Zhou, C. Y., L. Yu, Z. R. Huang, Z. Liu, and L. H. Zhang. 2021. “Analysis of microstructure and spatially dependent permeability of soft soil during consolidation deformation.” Soils Found. 61 (3): 708–733. https://doi.org/10.1016/j.sandf.2021.02.004.
Zhou, C. Y., L. Yu, F. F. You, Z. Liu, Y. H. Liang, and L. H. Zhang. 2020. “Coupled seepage and stress model and experiment verification for creep behavior of soft rock.” Int. J. Geomech. 20 (9): 04020146. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001774.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Jul 17, 2021
Accepted: Sep 16, 2021
Published online: Feb 24, 2022
Published in print: May 1, 2022
Discussion open until: Jul 24, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.