Improving the Properties of Soft Clay Using Cement, Slag, and Nanosilica: Experimental and Statistical Modeling
Publication: Journal of Materials in Civil Engineering
Volume 34, Issue 4
Abstract
Efficient utilization of problematic soils such as soft clay by imparting additional strength using various stabilization techniques is done to improve soil properties. The application of nanomaterials in the area of soil stabilization has great potential to create a stiff skeleton, especially when blended with cementitious materials. Using the response surface method, this study focused on studying the effects of single and blended cementitious systems, comprising cement (0% to 20%), slag (0% to 20%), and nanosilica (0% to 2.4%), on the properties of soft clay in wet conditions [water-to-soil ratio () of 53% to 87%]. The mechanical [California bearing ratio (CBR), unconfined compressive strength up to 91 days] and durability (freezing-thawing durability factor) properties of stabilized clay were investigated, and the bulk trends were corroborated by thermogravimetry and microscopy analyses. Based on statistical analysis, incremental addition of cement, slag, and nanosilica led to the systematic increase in the properties of soft clay, albeit to different extents and with different mechanisms. At the low (53%), superior mechanical and durability properties were obtained for soft clay stabilized with the ternary binder comprising cement, slag, and nanosilica. Numerical optimization showed that stabilizing this weak type of soft/expansive clay is possible, but the results (proportions, performance, cost) varied based on the target design criteria and application.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or codes that support the findings of this study are available from the corresponding author upon reasonable request (raw data for CBR, compressions, freezing-thawing tests, and calcium hydroxide contents in the mixtures).
Acknowledgments
The authors greatly appreciate the financial support of the City of Winnipeg and the Natural Sciences and Engineering Research Council of Canada. The IKO Construction Materials Testing Facility at the University of Manitoba where these experiments were conducted was instrumental to this research.
References
ACI (American Concrete Institute). 2009. Report on soil cement. Farmington Hills, MI: ACI.
Ahmed, A., and K. Ugai. 2011. “Environmental effects on durability of soil stabilized with recycled gypsum.” Cold Reg. Sci. Technol. 66 (2–3): 84–92. https://doi.org/10.1016/j.coldregions.2010.12.004.
Anagnostopoulos, C. A. 2015. “Strength properties of an epoxy resin and cement-stabilized silty clay soil.” Appl. Clay Sci. 114 (Sep): 517–529. https://doi.org/10.1016/j.clay.2015.07.007.
ASTM. 2012. Standard test methods for laboratory compaction characteristics of soil using standard effort (12,400 ft-lbf/ft3 (600 kN-m/m3)). ASTM D698-12e2. West Conshohocken, PA: ASTM.
ASTM. 2014. Standard test methods for specific gravity of soil solids by water pycnometer. ASTM D854-14. West Conshohocken, PA: ASTM.
ASTM. 2015a. Standard specification for chemical admixtures for concrete. ASTM C494/C494M-15. West Conshohocken, PA: ASTM.
ASTM. 2015b. Standard test method for resistance of concrete to rapid freezing and thawing. ASTM C666/C666M-15. West Conshohocken, PA: ASTM.
ASTM. 2016a. Standard test method for California bearing ratio (CBR) of laboratory-compacted soils. ASTM D1883-16. West Conshohocken, PA: ASTM.
ASTM. 2016b. Standard test methods for freezing and thawing compacted soil-cement mixtures. ASTM D560/D560M-16. West Conshohocken, PA: ASTM.
ASTM. 2017a. Standard practice for classification of soils for engineering purposes (unified soil classification system). ASTM D2487-17. West Conshohocken, PA: ASTM.
ASTM. 2017b. Standard test methods for compressive strength of molded soil-cement cylinders. ASTM D1633-17. West Conshohocken, PA: ASTM.
ASTM. 2017c. Standard test methods for liquid limit, plastic limit, and plasticity index of soils. ASTM D4318-17e1. West Conshohocken, PA: ASTM.
ASTM. 2017d. Standard test method for particle-size distribution (gradation) of fine-grained soils using the sedimentation (hydrometer) analysis. ASTM D7928-17. West Conshohocken, PA: ASTM.
ASTM. 2019. Standard test methods for laboratory determination of water (moisture) content of soil and rock by mass. ASTM D2216-19. West Conshohocken, PA: ASTM.
Bellezza, I., and E. Fratalocchi. 2006. “Effectiveness of cement on hydraulic conductivity of compacted soil-cement mixtures.” Proc. Inst. Civ. Eng. Ground Improv. 10 (2): 77–90. https://doi.org/10.1680/grim.2006.10.2.77.
Carpenter, S. H., M. R. Crovetti, K. L. Smith, and T. Wilson. 1992. Soil and base stabilization and associated drainage considerations. Washington, DC: Office of Technology Applications, Federal Highway Administration.
Changizi, F., and A. Haddad. 2015. “Strength properties of soft clay treated with mixture of nano- and recycled polyester fiber.” J. Rock Mech. Geotech. Eng. 7 (4): 367–378. https://doi.org/10.1016/j.jrmge.2015.03.013.
COW (City of Winnipeg). 2020. Sub-grade, sub-base and base course construction. CW 3110. Winnipeg, MB, Canada: COW.
CSA (Canadian Standards Association). 2018. Cementitious materials for use in concrete. CSA-A3001-13. Mississauga, ON, Canada: CSA.
Cui, Z. D., P. P. He, and W. H. Yang. 2014. “Mechanical properties of a silty clay subjected to freezing–thawing.” Cold Reg. Sci. Technol. 98 (Feb): 26–34. https://doi.org/10.1016/j.coldregions.2013.10.009.
Design-Expert. 2018. Software for design of experiments. Minneapolis: Stat-Ease.
Disu, A. A., and P. K. Kolay. 2021. “A critical appraisal of soil Stabilization using geopolymers: The past, present and future.” Int. J. Geosynth. Ground Eng. 7 (2): 1–16. https://doi.org/10.1007/s40891-021-00267-w.
Ghazy, A., and M. T. Bassuoni. 2017. “Shrinkage of nano-modified fly ash concrete as a repair material.” ACI Mater. J. 114 (6): 877–888.
Ghazy, A., M. T. Bassuoni, and A. Shalaby. 2016. “Nano-modified fly ash concrete: A repair option for concrete pavements.” ACI Mater. J. 113 (2): 231–242.
Gupta, D., and A. Kumar. 2017. “Performance evaluation of cement-stabilized pond ash-rice husk ash-clay mixture as a highway construction material.” J. Rock Mech. Geotech. Eng. 9 (1): 159–169. https://doi.org/10.1016/j.jrmge.2016.05.010.
Haruehansapong, S., T. Pulngern, and S. Chucheepsakul. 2014. “Effect of the particle size of nanosilica on the compressive strength and the optimum replacement content of cement mortar containing nano-SiO2.” Constr. Build. Mater. 50 (Jan): 471–477. https://doi.org/10.1016/j.conbuildmat.2013.10.002.
Huang, Y., and L. Wang. 2016. “Experimental studies on nanomaterials for soil improvement: A review.” Environ. Earth Sci. 75 (6): 497. https://doi.org/10.1007/s12665-015-5118-8.
Kalhor, A., M. Ghazavi, M. Roustaei, and S. M. Mirhosseini. 2019. “Influence of nano- on geotechnical properties of fine soils subjected to freeze-thaw cycles.” Cold Reg. Sci. Technol. 161 (May): 129–136. https://doi.org/10.1016/j.coldregions.2019.03.011.
Kamaruddin, F. A., V. Anggraini, B. Kim Huat, and H. Nahazanan. 2020. “Wetting/drying behavior of lime and alkaline activation stabilized marine clay reinforced with modified coir fiber.” Materials 13 (12): 2753. https://doi.org/10.3390/ma13122753.
Kavak, A., and F. Tüylüce. 2012. Treatment of marine clay with hydrated lime and quicklime. West Conshohocken, PA: ASTM.
Kiliç, R., Ö. Küçükali, and K. Ulamiş. 2016. “Stabilization of high plasticity clay with lime and gypsum (Ankara, Turkey).” Bull. Eng. Geol. Environ. 75 (2): 735–744. https://doi.org/10.1007/s10064-015-0757-2.
Kitazume, M., and T. Satoh. 2005. “Quality control in central Japan international airport construction.” Proc. Inst. Civ. Eng. Ground Improv. 9 (2): 59–66. https://doi.org/10.1680/grim.2005.9.2.59.
Korpa, A., T. Kowald, and R. Trettin. 2008. “Hydration behaviour, structure and morphology of hydration phases in advanced cement-based systems containing micro and nanoscale pozzolanic additives.” Cem. Concr. Res. 38 (7): 955–962. https://doi.org/10.1016/j.cemconres.2008.02.010.
Liu, Y., L. Q. He, Y. J. Jiang, M. M. Sun, E. J. Chen, and F. H. Lee. 2019. “Effect of in situ water content variation on the spatial variation of strength of deep cement-mixed clay.” Géotechnique 69 (5): 391–405. https://doi.org/10.1680/jgeot.17.P.149.
Liu, Y., Y. J. Jiang, H. Xiao, and F. H. Lee. 2017. “Determination of representative strength of deep cement-mixed clay from core strength data.” Géotechnique 67 (4): 350–364. https://doi.org/10.1680/jgeot.16.P.105.
Mehta, P. K., and P. J. M. Monteiro. 2014. Concrete. New York: McGraw-Hill.
Mohammed, A. 2018. “Property correlations and statistical variations in the geotechnical properties of (CH) clay soils.” Geotech. Geol. Eng. 36 (Nov): 267–281. https://doi.org/10.1007/s10706-017-0325-6.
Montgomery, D. C. 2017. Design and analysis of experiments. 9th ed. New York: Wiley.
Neville, A. M. 2011. Properties of concrete. London: Prentice Hall.
Pan, Y., G. Shi, Y. Liu, and F. H. Lee. 2018. “Effect of spatial variability on performance of cement-treated soil slab during deep excavation.” Constr. Build. Mater. 188 (Nov): 505–519. https://doi.org/10.1016/j.conbuildmat.2018.08.112.
PCA (Portland Cement Association). 1956. Soil-cement laboratory handbook. Skokie, IL: PCA.
Rayón, E., M. P. Arrieta, T. Pasíes, J. López, and J. L. Jordá. 2018. “Enhancing the mechanical features of clay surfaces by the absorption of nano- particles in aqueous media: Case study on Bronze Age clay objects.” Cem. Concr. Compos. 93 (Oct): 107–117. https://doi.org/10.1016/j.cemconcomp.2018.07.005.
Said, A. M., M. S. Zeidan, M. T. Bassuoni, and Y. Tian. 2012. “Properties of concrete incorporating nano-silica.” Constr. Build. Mater. 36 (Nov): 838–844. https://doi.org/10.1016/j.conbuildmat.2012.06.044.
Salimi, M., and A. Ghorbani. 2020. “Mechanical and compressibility characteristics of a soft clay stabilized by slag-based mixtures and geopolymers.” Appl. Clay Sci. 184 (Jan): 105390. https://doi.org/10.1016/j.clay.2019.105390.
Senff, L., J. Labrincha, V. M. Ferreira, D. Hotza, and W. Repette. 2009. “Effect of nano-silica on rheology and fresh properties of cement pastes and mortars.” Constr. Build. Mater. 23 (7): 2487–2491. https://doi.org/10.1016/j.conbuildmat.2009.02.005.
Seyedi, S., S. Mirkazemi, and M. Baziar. 2013. “Appliction of nanomaterial to stabilize a weak soil.” In Proc., 7th Int. Conf. on Case Hist. Geotech. Eng., 1–8. Rolla, MO: Missouri Univ. of Science and Technology. https://scholarsmine.mst.edu/icchge/7icchge/session_06/5.
Sharma, K., and A. Kumar. 2021. “Geotechnical behaviour of copper slag mixed with different proportions of soil, lime, fly ash and cement—A review.” In Proc., Sustainable Environment Infrastructure, 103–116. Cham, Switzerland: Springer.
Shibi, T., and T. Kamei. 2014. “Effect of freeze-thaw cycles on the strength and physical properties of cement-stabilised soil containing recycled bassanite and coal ash.” Cold Reg. Sci. Technol. 106 (Oct): 36–45. https://doi.org/10.1016/j.coldregions.2014.06.005.
Singh, D., T. Kumar, and A. Kaushal. 2021. “Influence of fly ash, lime, lines obtained from demolished structures waste on geotechnical and strength characteristics of soil.” In Proc., Sustainable Environment Infrastructure, 327–334. Cham, Switzerland: Springer.
Singh, L. P., S. R. Karade, S. K. Bhattacharyya, M. M. Yousuf, and S. Ahalawat. 2013. “Beneficial role of nanosilica in cement based materials—A review.” Constr. Build. Mater. 47 (Oct): 1069–1077. https://doi.org/10.1016/j.conbuildmat.2013.05.052.
Tan, T. S., Y. T. Lu, K. K. Phoon, and M. Karthikeyan. 2011. “Innovative approaches to land reclamation in Singapore.” In Advances in ground technology and geo-information, 85–102. Singapore: Geotechnical Society of Singapore. https://doi.org/10.3850/978-981-07-0188-8_P176.
Teerawattanasuk, C., and P. Voottipruex. 2014. “Influence of clay and silt proportions on cement-treated fine-grained soil.” J. Mater. Civ. Eng. 26 (3): 420–428. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000813.
Terzaghi, K., R. B. Peck, and G. Mesri. 1996. Soil mechanics in engineering practice. New York: Wiley.
Tinoco, J., A. Alberto, P. da Venda, A. G. Correia, and L. Lemos. 2016. “A data-driven approach for prediction of laboratory soil-cement mixtures.” Procedia Eng. 143 (Jan): 566–573. https://doi.org/10.1016/j.proeng.2016.06.073.
USACE. 1994. Soil stabilization for pavements. Washington, DC: USACE.
Wang, S. F., P. Yang, and Z. H. Yang. 2018. “Characterization of freeze–thaw effects within clay by 3D X-ray computed tomography.” Cold Reg. Sci. Technol. 148 (Apr): 13–21. https://doi.org/10.1016/j.coldregions.2018.01.001.
Yadu, L., and R. K. Tripathi. 2013. “Effects of granulated blast furnace slag in the engineering behaviour of stabilized soft soil.” Procedia Eng. 51 (Jan): 125–131. https://doi.org/10.1016/j.proeng.2013.01.019.
Yoobanpot, N., P. Jamsawang, and S. Horpibulsuk. 2017. “Strength behavior and microstructural characteristics of soft clay stabilized with cement kiln dust and fly ash residue.” Appl. Clay Sci. 141 (Jun): 146–156. https://doi.org/10.1016/j.clay.2017.02.028.
Yu, H. L., X. L. Na, and Z. H. Yang. 2015. “Characterization of frozen soil-cement mixture for berm construction in cold regions.” Sci. Cold Arid Reg. 7 (4): 299–306. https://doi.org/10.3724/SP.J.1226.2015.00300.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 34 • Issue 4 • April 2022
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Jun 2, 2021
Accepted: Sep 2, 2021
Published online: Jan 24, 2022
Published in print: Apr 1, 2022
Discussion open until: Jun 24, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- A. Eissa, A. M. Yasien, M. T. Bassuoni, M. Alfaro, Performance of Treated Soft Clay with Nano-Modified Cementitious Binders at Reference and Cold Temperatures, International Journal of Geosynthetics and Ground Engineering, 10.1007/s40891-022-00398-8, 8, 5, (2022).
- Afshin Khoshand, Ata Alishirinpourfarkhad, Morteza Solhianari, Bardia Tabiatnejad, Characterization and mechanism analysis of stabilized/solidified oil-contaminated soils, Arabian Journal of Geosciences, 10.1007/s12517-022-10613-5, 15, 15, (2022).