Abstract
The main objective of this study is to quantitatively determine the magnetic field capability of a Helmholtz coil in orienting steel fibers and show the correlation between the fiber orientation and tensile strength of steel fiber-reinforced concrete (SFRC) materials. Using X-ray computed tomography (CT), the exact distribution of fiber orientations was computed for both the magnetized and nonmagnetized samples containing 3, 5, 7, and 9 mm long fibers. The probability of a fiber being aligned parallel to the length of the specimen increased by 28.33%, 44.05%, 49.33%, and 27.12% for fibers with lengths of 3, 5, 7, and 9 mm, respectively. Finally, the uniaxial tensile strength of each sample was determined using direct tension tests. The average tensile strengths of the samples increased 0.51, 0.46, 0.64, and 0.76 MPa for the 3, 5, 7, and 9 mm fiber lengths, respectively. On average, the tensile strength of the samples increased by 27% after being exposed to an external magnetic field.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
Computed tomography work was supported by the US National Science Foundation (Grant No. 1840138).
References
ASTM. 2007. Standard test method for flow of hydraulic cement mortar. ASTM C1437. West Conshohocken, PA: ASTM.
ASTM. 2013. Tensile strength of concrete surfaces and the bond strength. ASTM C1583. West Conshohocken, PA: ASTM.
Barnett, S. J., J. F. Lataste, T. Parry, S. G. Millard, and M. N. Soutsos. 2010. “Assessment of fibre orientation in ultra high performance fibre reinforced concrete and its effect on flexural strength.” Mater. Struct. 43 (7): 1009–1023. https://doi.org/10.1617/s11527-009-9562-3.
Chen, H. J., Y. L. Yu, and C. W. Tang. 2020. “Mechanical properties of ultra-high performance concrete before and after exposure to high temperatures.” Materials (Basel) 13 (3): 1–17. https://doi.org/10.3390/ma13030770.
Chu, S. H. 2019. “Effect of paste volume on fresh and hardened properties of concrete.” Constr. Build. Mater. 218 (Sep): 284–294. https://doi.org/10.1016/j.conbuildmat.2019.05.131.
Chu, S. H., and A. K. H. Kwan. 2019. “A new bond model for reinforcing bars in steel fibre reinforced concrete.” Cem. Concr. Compos. 104 (Nov): 103405. https://doi.org/10.1016/j.cemconcomp.2019.103405.
Ciambella, J., D. C. Stanier, and S. S. Rahatekar. 2017. “Magnetic alignment of short carbon fibres in curing composites.” Composites, Part B 109 (Jan): 129–137. https://doi.org/10.1016/j.compositesb.2016.10.038.
Darwin, D., C. W. Dolan, and A. H. Nilson. 2016. Design of concrete structures. New York: McGraw-Hill.
Dehghan-Niri, E., B. Weldon, and R. Foudazi. 2019. Electromagnetic-based multi-directional alignment method and apparatus for fibers in composite materials. Washington, DC: US Patent and Trademark Office.
Edgington, J., and D. J. Hannant. 1972. “Steel fiber reinforced concrete. The effect on fibre orientation of compaction by vibration.” Mater. Constr. 5 (1): 41–44. https://doi.org/10.1007/BF02479076.
Ferreira, S. R., M. Pepe, E. Martinelli, F. de Andrade Silva, and R. D. Toledo Filho. 2018. “Influence of natural fibers characteristics on the interface mechanics with cement based matrices.” Composites, Part B 140 (May): 183–196. https://doi.org/10.1016/j.compositesb.2017.12.016.
Garcia, E. Y. F. 2019. “Bond strength assessment of ultra-high performance concrete for shear key applications in concrete bridges.” Ph.D. thesis, Dept. of Civil Engineering, New Mexico State Univ.
Gonzalez, R., and R. Woods. 2008. Digital image processing. New York: Pearson.
Graybeal, B. A. 2006. Material property characterization of ultra-high performance concrete. Washington, DC: Federal Highway Administration, Office of Infrastructure Research and Development.
Groeneveld, A. B., T. M. Ahlborn, C. K. Crane, and W. R. Long. 2017. Effect of fiber orientation on dynamic compressive properties of an ultra-high performance concrete. Washington, DC: Transportation Research International Documentation.
Gyawali, S. R. 2008. “Design and construction of Helmholtz coil for biomagnetic studies on soybean.” M.S. thesis, Dept. of Electrical Engineering. Univ. of Missouri–Columbia.
Islam, N. E. 2008. “Design and construction of Helmholtz Coil for biometric for biomagnetic studies on soybean.” Master thesis, Dept. of Electrical Engineering, Univ. of Missouri-Columbia.
Juárez-Badillo, E. 1999. “Stress-strain relationship of confined high-strength plain and fiber concrete.” J. Mater. Civ. Eng. 11 (4): 363. https://doi.org/10.1061/(ASCE)0899-1561(1999)11:4(363).
Kang, S. T., and J. K. Kim. 2011. “The relation between fiber orientation and tensile behavior in an ultra high performance fiber reinforced cementitious composites (UHPFRCC).” Cem. Concr. Res. 41 (10): 1001–1014. https://doi.org/10.1016/j.cemconres.2011.05.009.
Kim, S. W., S. T. Kang, J. J. Park, and G. S. Ryu. 2008. “Effect of filling method on fibre orientation & dispersion and mechanical properties of UHPC.” In Proc., 2nd Int. Symp. on UHPC, 185–195. Kassel, Germany: Kassel University Press.
Kimura, T., M. Yamato, W. Koshimizu, M. Koike, and T. Kawai. 2000. “Magnetic orientation of polymer fibers in suspension.” Langmuir 16 (2): 858–861. https://doi.org/10.1021/la990761j.
Kwan, A. K. H., and S. H. Chu. 2018. “Direct tension behaviour of steel fibre reinforced concrete measured by a new test method.” Eng. Struct. 176 (Dec): 324–336. https://doi.org/10.1016/j.engstruct.2018.09.010.
Laranjeira, F., A. Aguado, C. Molins, S. Grünewald, J. Walraven, and S. Cavalaro. 2012. “Framework to predict the orientation of fibers in FRC: A novel philosophy.” Cem. Concr. Res. 42 (6): 752–768. https://doi.org/10.1016/j.cemconres.2012.02.013.
Laranjeira, F., S. Grünewald, J. Walraven, C. Blom, C. Molins, and A. Aguado. 2011. “Characterization of the orientation profile of steel fiber reinforced concrete.” Mater. Struct. 44 (6): 1093–1111. https://doi.org/10.1617/s11527-010-9686-5.
Li, H., R. Mu, L. Qing, H. Chen, and Y. Ma. 2018. “The influence of fiber orientation on bleeding of steel fiber reinforced cementitious composites.” Cem. Concr. Compos. 92 (May): 125–134. https://doi.org/10.1016/j.cemconcomp.2018.05.018.
Lutz, M. 2013. Learning Python. 5th ed. Sebastopol, CA: O’Reilly Media.
Mobasher, B., A. Castro-Montero, and S. P. Shah. 1990. “A study of fracture in fiber-reinforced cement-based composites using laser holographic interferometry.” Exp. Mech. 30 (3): 286–294. https://doi.org/10.1007/BF02322824.
Mortazavian, S., and A. Fatemi. 2015. “Effects of fiber orientation and anisotropy on tensile strength and elastic modulus of short fiber reinforced polymer composites.” Composites, Part B 72 (Apr): 116–129. https://doi.org/10.1016/j.compositesb.2014.11.041.
Mu, R., H. Li, L. Qing, J. Lin, and Q. Zhao. 2017. “Aligning steel fibers in cement mortar using electro-magnetic field.” Constr. Build. Mater. 131 (Jan): 309–316. https://doi.org/10.1016/j.conbuildmat.2016.11.081.
Püspöki, Z., M. Storath, D. Sage, and M. Unser. 2016. “Transforms and operators for directional bioimage analysis: A survey.” In Focus on bio-image informatics, 69–93. Cham, Switzerland: Springer.
Reddy, B. S. K., V. G. Ghorpade, and H. S. Rao. 2013. “Effect of magnetic field exposure time on workability and compressive strength of magnetic water concrete.” Int. J. Adv. Eng. Technol. 4 (3): 120–122.
Stähli, P., R. Custer, and J. G. M. Van Mier. 2008. “On flow properties, fibre distribution, fibre orientation and flexural behaviour of FRC.” Mater. Struct. 41 (1): 189–196. https://doi.org/10.1617/s11527-007-9229-x.
Subburaj, K. 2012. CT scanning: Techniques and applications. Rijeka, Croatia: InTech.
Villar, V. P., N. F. Medina, M. M. Alonso, S. G. Diez, and F. Puertas. 2019a. “Assessment of parameters governing the steel fiber alignment in fresh cement-based composites.” Constr. Build. Mater. 207 (May): 548–562. https://doi.org/10.1016/j.conbuildmat.2019.02.036.
Villar, V. P., N. F. Medina, and F. Hernández-Olivares. 2019b. “A model about dynamic parameters through magnetic fields during the alignment of steel fibres reinforcing cementitious composites.” Constr. Build. Mater. 201 (Mar): 340–349. https://doi.org/10.1016/j.conbuildmat.2018.12.105.
Wijffels, M. J. H. 2013. “Magnetically orienting steel fibres in self-compacting concrete.” Ph.D. thesis, Dept. of the Built Environment, Eindhoven Univ. of Technology.
Wijffels, M. J. H., R. J. M. Wolfs, A. S. J. Suiker, and T. A. M. Salet. 2017. “Magnetic orientation of steel fibres in self-compacting concrete beams: Effect on failure behaviour.” Cem. Concr. Compos. 80 (Jul): 342–355. https://doi.org/10.1016/j.cemconcomp.2017.04.005.
Wille, K., A. E. Naaman, S. El-Tawil, and G. J. Parra-Montesinos. 2012. “Ultra-high performance concrete and fiber reinforced concrete: Achieving strength and ductility without heat curing.” Mater. Struct. 45 (3): 309–324. https://doi.org/10.1617/s11527-011-9767-0.
Xue, W., J. Chen, F. Xie, and B. Feng. 2018. “Orientation of steel fibers in magnetically driven concrete and mortar.” Materials (Basel) 11 (1): 1–12. https://doi.org/10.3390/ma11010170.
Yoo, D. Y., N. Banthia, S. T. Kang, and Y. S. Yoon. 2016. “Effect of fiber orientation on the rate-dependent flexural behavior of ultra-high-performance fiber-reinforced concrete.” Compos. Struct. 157 (Dec): 62–70. https://doi.org/10.1016/j.compstruct.2016.08.023.
Yoo, D. Y., S. T. Kang, and Y. S. Yoon. 2014. “Effect of fiber length and placement method on flexural behavior, tension-softening curve, and fiber distribution characteristics of UHPFRC.” Constr. Build. Mater. 64 (Aug): 67–81. https://doi.org/10.1016/j.conbuildmat.2014.04.007.
Zhang, P., Q. Li, Y. Chen, Y. Shi, and Y. F. Ling. 2019. “Durability of steel fiber-reinforced concrete containing nano-particles.” Materials (Basel) 12 (13): 2184. https://doi.org/10.3390/ma12132184.
Zhang, P., Y. N. Zhao, Q. F. Li, T. H. Zhang, and P. Wang. 2014a. “Mechanical properties of fly ash concrete composite reinforced with nano- and steel fibre.” Current Sci. 106 (11): 1529–1537.
Zhang, P., Y. N. Zhao, C. H. Liu, P. Wang, and T. H. Zhang. 2014b. “Combined effect of nano- particles and steel fibers on flexural properties of concrete composite containing fly ash.” Sci. Eng. Compos. Mater. 21 (4): 597–605. https://doi.org/10.1515/secm-2013-0179.
Zhou, B., and Y. Uchida. 2013. “Fiber orientation in ultra high performance fiber reinforced concrete and its visualization.” In Proc., 8th Int. Conf. on Fracture Mechanics of Concrete and Concrete Structures, 228–235. Gifu, Japan: Gifu Univ.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Mar 18, 2021
Accepted: Jun 23, 2021
Published online: Nov 26, 2021
Published in print: Feb 1, 2022
Discussion open until: Apr 26, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.