Strength and Permeability of No-Fines Concrete Made with Supplementary Cementitious Materials
Publication: Journal of Materials in Civil Engineering
Volume 34, Issue 1
Abstract
No-fines concrete (NFC) has a large volume of voids and a porous nature which reduces the rainwater runoff, recharges the groundwater table, and reduces noise from vehicle tire movement. The elimination of sand and the high amount of voids in NFC leads to a decrease in the strength. Therefore it can be used only in limited practical applications. An attempt was made in this study to improve its strength without compromising its porosity and permeability properties by utilizing optimum levels of supplementary cementitious materials (SCM)—rice husk ash (RHA) and silica fume (SF)—as partial replacement of cement. Results indicated significant improvement in compressive strength by 16.40% with 10% replacement of cement by SF at 90 days, and 25.04% increase with 5% RHA at 90 days. The results were well supported by microstructural analysis of NFC mixes with SCM replacement, which showed a dense and compact micrograph. Permeability and porosity decreased very marginally with SF and RHA replacement at optimum levels without much affecting the drainage properties. The improved compressive and flexural strength and abrasion resistance of NFC with RHA and SF as SCMs indicated applicability in medium-traffic applications.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
References
ACI (American Concrete Institute). 2006. Pervious concrete. ACI 522R-06. Farmington Hills, MI: ACI.
ACI (American Concrete Institute). 2010. Report on pervious concrete. ACI Committee 522. Farmington Hills, MI: ACI.
Adil, G., J. T. Kevern, and D. Mann. 2020. “Influence of silica fume on mechanical and durability of pervious concrete.” Constr. Build. Mater. 247 (Jun): 118453. https://doi.org/10.1016/j.conbuildmat.2020.118453.
Anderson, I., and M. M. Dewoolkar. 2015. “Laboratory freezing-and-thawing durability of fly ash pervious concrete in a simulated field environment.” ACI Mater. J. 112 (5): 603–611. https://doi.org/10.14359/51687921.
ASTM. 2012. Standard test method for density and void content of hardened pervious concrete. ASTM C1754-12. West Conshohocken, PA: ASTM.
ASTM. 2013. Standard test method for density, absorption, and voids in hardened concrete. ASTM C642. West Conshohocken, PA: ASTM.
ASTM. 2015. Standard test method for determining potential resistance to degradation of pervious concrete by impact and abrasion. ASTM C1747/C1747M. West Conshohocken, PA: ASTM.
ASTM. 2017. Standard specification for Portland cement. ASTM C150. West Conshohocken, PA: ASTM.
Bhutta, M. A. R., K. Tsuruta, and J. Mirza. 2012. “Evaluation of high-performance porous concrete properties.” Constr. Build. Mater. 31 (Jun): 67–73. https://doi.org/10.1016/j.conbuildmat.2011.12.024.
BIS (Bureau of Indian Standards). 1959. Indian standard methods of tests for strength of concrete. IS 516. New Delhi, India: BIS.
BIS (Bureau of Indian Standards). 1999. Splitting tensile strength of concrete—Method of test. IS 5816. New Delhi, India: BIS.
BIS (Bureau of Indian Standards). 2013. Ordinary Portland cement, 43 grade—Specification. IS 8112. New Delhi, India: BIS.
Chindaprasirt, P., S. Hatanaka, T. Chareerat, N. Mishima, and Y. Yuasa. 2008. “Cement paste characteristics and porous concrete properties.” Constr. Build. Mater. 22 (5): 894–901. https://doi.org/10.1016/j.conbuildmat.2006.12.007.
Chopra, D., R. Siddique, and Kunal. 2015. “Strength, permeability and microstructure of self-compacting concrete containing rice husk ash.” Biosyst. Eng. 130 (Feb): 72–80. https://doi.org/10.1016/j.biosystemseng.2014.12.005.
Dinakar, P., P. K. Sahoo, and G. Sriram. 2013. “Effect of metakaolin content on the properties of high strength concrete.” Int. J. Concr. Struct. Mater. 7 (3): 215–223. https://doi.org/10.1007/s40069-013-0045-0.
Dong, J. W., Y. B. Pei, and L. Q. Wang. 2002. “Study and application of environment-friendly concrete protection and lining materials.” China Water Resour. 80 (2): 64–65.
Ganesan, K., K. Rajagopal, and K. Thangavel. 2008. “Rice husk ash blended cement: Assessment of optimal level of replacement for strength and permeability properties of concrete.” Constr. Build. Mater. 22 (8): 1675–1683. https://doi.org/10.1016/j.conbuildmat.2007.06.011.
Gill, A. S., and R. Siddique. 2017. “Strength and micro-structural properties of self-compacting concrete containing metakaolin and rice husk ash.” Constr. Build. Mater. 157 (Dec): 51–64. https://doi.org/10.1016/j.conbuildmat.2017.09.088.
Gill, A. S., and R. Siddique. 2018. “Durability properties of self-compacting concrete incorporating metakaolin and rice husk ash.” Constr. Build. Mater. 176 (Jul): 323–332. https://doi.org/10.1016/j.conbuildmat.2018.05.054.
Givi, A. N., S. A. Rashid, F. N. A. Aziz, and M. A. M. Salleh. 2010. “Contribution of rice husk ash to the properties of mortar and concrete: A review.” J. Am. Sci. 6 (3): 157–165.
Grubeša, I. N., I. Barišić, V. Ducman, and L. Korat. 2018. “Draining capability of single-sized pervious concrete.” Constr. Build. Mater. 169 (Apr): 252–260. https://doi.org/10.1016/j.conbuildmat.2018.03.037.
Güneyisi, E., M. Gesoǧlu, S. Karaoǧlu, and K. Mermerdaş. 2012. “Strength, permeability and shrinkage cracking of silica fume and metakaolin concretes.” Constr. Build. Mater. 34 (Sep): 120–130. https://doi.org/10.1016/j.conbuildmat.2012.02.017.
Hesami, S., S. Ahmadi, and M. Nematzadeh. 2014. “Effects of rice husk ash and fiber on mechanical properties of pervious concrete pavement.” Constr. Build. Mater. 53 (Feb): 680–691. https://doi.org/10.1016/j.conbuildmat.2013.11.070.
Huang, Y., and X. Yu. 2007. “No-fines concrete as ecologic stream bank erosion control.” In Geo-Denver 2007: Geotechnics of Soil Erosion, Geotechnical Special Publication 6, edited by G. Biscontin, 1–9. Reston, VA: ASCE.
IRC (Indian Roads Congress). 2017. Guidelines for cement concrete mix design for pavements. IRC 44. New Delhi, India: IRC.
JSA (Japanese Standards Association). 2016. Precast unreinforced concrete products. JIS A 5371. Tokyo: JSA.
Karthikeyan, B., and G. Dhinakaran. 2018. “Influence of ultrafine and silica fume on performance of unreinforced and fiber reinforced concrete.” Constr. Build. Mater. 161 (Feb): 570–576. https://doi.org/10.1016/j.conbuildmat.2017.11.133.
Kevern, J. T. 2013. “Mix design development for Portland cement pervious concrete in cold weather climates.” J. Chem. Inf. Model. 53 (9): 1689–1699.
Lang, L., H. Duan, and B. Chen. 2019. “Properties of pervious concrete made from steel slag and magnesium phosphate cement.” Constr. Build. Mater. 209 (Jun): 95–104. https://doi.org/10.1016/j.conbuildmat.2019.03.123.
Le, H. T., S. T. Nguyen, and H.-M. Ludwig. 2014. “A study on high performance fine-grained concrete containing rice husk ash.” Int. J. Concr. Struct. Mater. 8 (4): 301–307. https://doi.org/10.1007/s40069-014-0078-z.
Li, H., M.-H. Zhang, and J.-P. Ou. 2006. “Abrasion resistance of concrete containing nano-particles for pavement.” Wear 260 (11–12): 1262–1266. https://doi.org/10.1016/j.wear.2005.08.006.
Lian, C., and Y. Zhuge. 2010. “Optimum mix design of enhanced permeable concrete—An experimental investigation.” Constr. Build. Mater. 24 (12): 2664–2671. https://doi.org/10.1016/j.conbuildmat.2010.04.057.
Lohan, S. K., H. S. Jat, A. K. Yadav, H. S. Sidhu, M. L. Jat, M. Choudhary, J. K. Peter, and P. C. Sharma. 2018. “Burning issues of paddy residue management in north-west states of India.” Renewable Sustainable Energy Rev. 81 (Jun): 693–706. https://doi.org/10.1016/j.rser.2017.08.057.
Mehta, A., and D. K. Ashish. 2019. “Silica fume and waste glass in cement concrete production: A review.” J. Build. Eng. 29 (Mar): 100888. https://doi.org/10.1016/j.jobe.2019.100888.
Mehta, A., and R. Siddique. 2018. “Sustainable geopolymer concrete using ground granulated blast furnace slag and rice husk ash: Strength and permeability properties.” J. Cleaner Prod. 205 (Dec): 49–57. https://doi.org/10.1016/j.jclepro.2018.08.313.
Mosaberpanah, M. A., and S. A. Umar. 2020. “Utilizing rice husk ash as supplement to cementitious materials on performance of ultra high performance concrete: A review.” Mater. Today Sustainability 7–8 (Mar): 100030. https://doi.org/10.1016/j.mtsust.2019.100030.
Moulick, K. K. 2015. “Prospective use of rice husk ash to produce concrete in India.” Int. J. Civ. Environ. Eng. 9 (3): 324–329. https://doi.org/10.5281/zenodo.1338184.
Nguyen, D. H., M. Boutouil, N. Sebaibi, L. Leleyter, and F. Baraud. 2013. “Valorization of seashell by-products in pervious concrete pavers.” Constr. Build. Mater. 49 (Dec): 151–160. https://doi.org/10.1016/j.conbuildmat.2013.08.017.
NRMCA (National Ready Mixed Concrete Association). 2004. “Freeze thaw resistance of pervious concrete.” NRMCA 20 (May): 78–84.
Olutoge, F. A., and P. A. Adesina. 2019. “Effects of rice husk ash prepared from charcoal-powered incinerator on the strength and durability properties of concrete.” Constr. Build. Mater. 196 (Jan): 386–394. https://doi.org/10.1016/j.conbuildmat.2018.11.138.
Padhi, R. S., R. K. Patra, B. B. Mukharjee, and T. Dey. 2018. “Influence of incorporation of rice husk ash and coarse recycled concrete aggregates on properties of concrete.” Constr. Build. Mater. 173 (Jun): 289–297. https://doi.org/10.1016/j.conbuildmat.2018.03.270.
Saboo, N., S. Shivhare, K. K. Kori, and A. K. Chandrappa. 2019. “Effect of fly ash and metakaolin on pervious concrete properties.” Constr. Build. Mater. 223 (Oct): 322–328. https://doi.org/10.1016/j.conbuildmat.2019.06.185.
Sanusi, G., D. Dauda, and I. Khalil. 2014. “An assessment of the durability properties of binary concrete containing rice husk ash.” Civ. Environ. Res. 6 (12): 22–30.
Shannag, M. J. 2000. “High strength concrete containing natural pozzolan and silica fume.” Cem. Concr. Compos. 22 (6): 399–406. https://doi.org/10.1016/S0958-9465(00)00037-8.
Shen, W., L. Shan, T. Zhang, H. Ma, Z. Cai, and H. Shi. 2013. “Investigation on polymer–rubber aggregate modified porous concrete.” Constr. Build. Mater. 38 (Jan): 667–674. https://doi.org/10.1016/j.conbuildmat.2012.09.006.
Siddique, R. 2007. Waste materials and by-products in concrete. Berlin: Springer.
Siddique, R. 2011. “Utilization of silica fume in concrete: Review of hardened properties.” In Resources, conservation and recycling. Amsterdam, Netherlands: Elsevier. https://doi.org/10.1016/j.resconrec.2011.06.012.
Siddique, R., K. Singh, P. Kunal, M. Singh, V. Corinaldesi, and A. Rajor. 2016. “Properties of bacterial rice husk ash concrete.” Constr. Build. Mater. 121 (Sep): 112–119. https://doi.org/10.1016/j.conbuildmat.2016.05.146.
Tennis, P. D., M. L. Leming, and D. J. Akers. 2004. Pervious concrete pavements. Skokie, IL: Portland Cement Association.
Torres, A., J. Hu, and A. Ramos. 2015. “The effect of the cementitious paste thickness on the performance of pervious concrete.” Constr. Build. Mater. 95 (Oct): 850–859. https://doi.org/10.1016/j.conbuildmat.2015.07.187.
USGS. 2011. Mineral commodity summaries. Washington, DC: USGS.
USGS. 2020. Mineral commodity summaries. Washington, DC: USGS.
Van Tuan, N., G. Ye, K. Van Breugel, A. L. A. Fraaij, and D. D. Bui. 2011. “The study of using rice husk ash to produce ultra high performance concrete.” Constr. Build. Mater. 25 (4): 2030–2035. https://doi.org/10.1016/j.conbuildmat.2010.11.046.
Yang, J., and G. Jiang. 2003. “Experimental study on properties of pervious concrete pavement materials.” Cem. Concr. Res. 33 (3): 381–386. https://doi.org/10.1016/S0008-8846(02)00966-3.
Yue, Y., J. J. Wang, and Y. Bai. 2018. “Tracing the status of silica fume in cementitious materials with Raman microscope.” Constr. Build. Mater. 159 (Jan): 610–616. https://doi.org/10.1016/j.conbuildmat.2017.11.015.
Zaetang, Y., A. Wongsa, V. Sata, and P. Chindaprasirt. 2017. “Influence of mineral additives on the properties of pervious concrete.” Indian J. Eng. Mater. Sci. 24 (6): 507–515.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Dec 1, 2020
Accepted: May 20, 2021
Published online: Oct 26, 2021
Published in print: Jan 1, 2022
Discussion open until: Mar 26, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Amit Kumar, Gyani Jail Singh, Babu Lal Chauhan, Rajesh Kumar, Strength and Durability Performance of Recycled Aggregate Structural Concrete with Silica Fume, Furnace Slag, and M-Fine, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-17547, 36, 7, (2024).
- Avishreshth Singh, Krishna Prapoorna Biligiri, Prasanna Venkatesh Sampath, Engineering properties and lifecycle impacts of Pervious All-Road All-weather Multilayered pavement, Resources, Conservation and Recycling, 10.1016/j.resconrec.2022.106186, 180, (106186), (2022).