Evaluation of Moisture Damage in Asphalt Mixtures at Macro- and Nanoscales
Publication: Journal of Materials in Civil Engineering
Volume 33, Issue 12
Abstract
The aim of this study was to examine the effects of different additives on the moisture resistance of asphalt binders using atomic force microscopy (AFM), and to correlate the results with those obtained in macroscale tests. To this end, AFM force spectroscopy was conducted on neat and polymer-modified asphalt binders produced using various warm mix asphalt (WMA) technologies. The technologies considered included Sasobit, Advera, foamed WMA, and Evotherm M1. Furthermore, the asphalt mixtures were prepared using the considered asphalt binders and were tested using the AASHTO T 283 test. The results of this study show that the most significant factor affecting the AFM adhesive forces of asphalt binders is the use of polymer additives. However, the interactions between various chemical groups in asphalt binders and the considered additives differ. Finally, it was found that the effect of aggregate-binder adhesive bonds on indirect tensile strength is greater than that of the binder’s cohesive bonds, as the cracking in this AASHTO T 283 test has more tendency to occur at the interface between the aggregate and the binder due to the high stress concentration.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
References
AASHTO. 2014. Standard method of test for resistance of compacted asphalt mixtures to moisture-induced damage. AASHTO T 283. Washington, DC: AASHTO.
Chakravarty, H., and S. Sinha. 2020. “Moisture damage of bituminous pavements and application of nanotechnology in its prevention.” J. Mater. Civ. Eng. 32 (8): 03120003. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003293.
Dave, E. V., J. S. Daniel, and R. B. Mallick. 2018. Moisture susceptibility testing for hot mix asphalt pavements in New England. Burlington, VT: New England Transportation Consortium.
Hung, A. M., and E. H. Fini. 2015. “AFM study of asphalt binder “bee” structures: Origin, mechanical fracture, topological evolution, and experimental artifacts.” RSC Adv. 5 (117): 96972–96982. https://doi.org/10.1039/C5RA13982A.
Jiang, Y., and K. T. Turner. 2016. “Measurement of the strength and range of adhesion using atomic force microscopy.” Extreme Mech. Lett. 9 (Dec): 119–126. https://doi.org/10.1016/j.eml.2016.05.013.
Li, Y., J. Yang, and T. Tan. 2015. “Study on adhesion between asphalt binders and aggregate minerals under ambient conditions using particle-modified atomic force microscope probes.” Constr. Build. Mater. 101 (Dec): 159–165. https://doi.org/10.1016/j.conbuildmat.2015.10.011.
Liu, K., L. Deng, and J. Zheng. 2016. “Nanoscale study on water damage for different warm mix asphalt binders.” Int. J. Pavement Res. Technol. 9 (6): 405–413. https://doi.org/10.1016/j.ijprt.2016.11.001.
Nazzal, M. D., L. Abu-Qtaish, S. Kaya, and D. Powers. 2015. “Using atomic force microscopy to evaluate the nanostructure and nanomechanics of warm mix asphalt.” J. Mater. Civ. Eng. 27 (10): 04015005. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001254.
Tarefder, R. A., and M. Arifuzzaman. 2011. “A study of moisture damage in plastomeric polymer modified asphalt binder using functionalized AFM tips.” J. Syst. Cybern. Inf. 9 (6): 20–29.
Tarefder, R. A., and A. M. Zaman. 2010. “Nanoscale evaluation of moisture damage in polymer modified asphalts.” J. Mater. Civ. Eng. 22 (7): 714–725. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000072.
Wang, H., Y. Guo, A. Shen, X. Yang, and P. Li. 2020. “Effect of nanoclays on moisture susceptibility of SBS-modified asphalt binder.” Adv. Mater. Sci. Eng. 2020 (1): 1–15. https://doi.org/10.1155/2020/2074232.
Xiao, F., W. Zhao, T. Gandhi, and S. N. Amirkhanian. 2010. “Influence of antistripping additives on moisture susceptibility of warm mix asphalt mixtures.” J. Mater. Civ. Eng. 22 (10): 1047–1055. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000111.
Yao, Z., H. Zhu, M. Gong, J. Yang, G. Xu, and Y. Zhong. 2017. “Characterization of asphalt materials’ moisture susceptibility using multiple methods.” Constr. Build. Mater. 155 (Nov): 286–295. https://doi.org/10.1016/j.conbuildmat.2017.08.032.
Yildirim, Y. 2007. “Polymer modified asphalt binders.” Constr. Build. Mater. 21 (1): 66–72. https://doi.org/10.1016/j.conbuildmat.2005.07.007.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Dec 2, 2020
Accepted: Apr 21, 2021
Published online: Sep 30, 2021
Published in print: Dec 1, 2021
Discussion open until: Feb 28, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Jianhua Liu, Mutian Sun, Shaoming Wu, Wenyuan Huang, Zhenyang Fan, Xiaobo Du, A Test Method to Evaluate the Adhesive Property between Asphalt and Aggregate Based on Simulating Actual Working Conditions, Sustainability, 10.3390/su14042160, 14, 4, (2160), (2022).
- Changjun Zhou, Honglin Ren, Jian Ouyang, Shiao Yan, Research of indoor molding of cold recycled foamed asphalt mixture with secondary hot compaction process considered, Construction and Building Materials, 10.1016/j.conbuildmat.2022.126886, 326, (126886), (2022).