Utilizing Photodetection Technique to Assess Moisture Damage of Asphalt Mixtures
Publication: Journal of Materials in Civil Engineering
Volume 33, Issue 11
Abstract
In this study, asphalt mixtures were subjected to the boiling water test, and the stripping potential was quantified in terms of loss index using the photodetection technique. Initially, the change in loss index due to variability in testing protocols like boiling time, drying time, and drying method was evaluated. Subsequently, loss index (LI), and tensile strength ratio (TSR) were determined for three different aggregate types, five liquid anti-stripping additive contents, and four dosages of hydrated lime. Results indicated that LI increased with the increase in boiling time, whereas LI decreased due to moisture. In terms of the drying method, the recommended hot-air-gun drying method was suitable for quantifying stripping. Furthermore, the results of both LI and TSR had a good correlation. The threshold limits for LI with respect to specified TSR requirement was evaluated and was found to be sensitive to variation in aggregate type and additive content. Therefore, LI values estimated using a quick tool could facilitate quality control during the asphalt mixture’s production stage.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The authors acknowledge the support provided by IIT Guwahati. The authors also highly appreciate the laboratory support provided by IRMS Lab, IIT Kanpur, for sample testing using XRF.
References
AASHTO. 2007. Resistance of compacted asphalt mixtures to moisture-induced damage. AASHTO T 283. Washington, DC: AASHTO.
Abuawad, I., I. Al-Qadi, and J. Trepanier. 2015. “Mitigation of moisture damage in asphalt concrete: Testing techniques and additives/modifiers effectiveness.” Constr. Build. Mater. 84 (Jun): 437–443. https://doi.org/10.1016/j.conbuildmat.2015.03.001.
Ångström, A. 1925. “The albedo of various surfaces of ground.” Geogr. Ann. 7 (4): 323–342. https://doi.org/10.1080/20014422.1925.11881121.
ASTM. 2009. Standard test method for low-temperature viscosity of lubricants measured by Brookfield viscometer. ASTM D2983-09. West Conshohocken, PA: ASTM.
ASTM. 2012. Standard practice for effect of water on bituminous-coated aggregate using boiling water. ASTM D3625/D3625M-12. West Conshohocken, PA: ASTM.
ASTM. 2015. Standard test method for solubility of asphalt materials in trichloroethylene. ASTM D2042-15. West Conshohocken, PA: ASTM.
BIS (Bureau of Indian Standards). 1963a. Methods of test for aggregates for concrete. Part I: Particle size and shape. IS 2386. New Delhi, India: BIS.
BIS (Bureau of Indian Standards). 1963b. Methods of test for aggregates for concrete. Part III: Specific gravity, density, voids, absorption and bulking. IS 2386. New Delhi, India: BIS.
BIS (Bureau of Indian Standards). 1963c. Methods of test for aggregates for concrete. Part IV: Mechanical properties. IS 2386. New Delhi, India: BIS.
BIS (Bureau of Indian Standards). 1978a. Methods for testing tar and bituminous materials: Determination of ductility. IS 1208. New Delhi, India: BIS.
BIS (Bureau of Indian Standards). 1978b. Methods for testing tar and bituminous materials: Determination of flash point and fire point. IS 1209. New Delhi, India: BIS.
BIS (Bureau of Indian Standards). 1978c. Methods for testing tar and bituminous materials: Determination of penetration. IS 1203. New Delhi, India: BIS.
BIS (Bureau of Indian Standards). 1978d. Methods for testing tar and bituminous materials: Determination of softening point. IS 1205. New Delhi, India: BIS.
BIS (Bureau of Indian Standards). 1978e. Methods for testing tar and bituminous materials: Determination of specific gravity. IS 1202. New Delhi, India: BIS.
Caro, S., E. Masad, A. Bhasin, and D. N. Little. 2008. “Moisture susceptibility of asphalt mixtures. Part 1: Mechanisms.” Int. J. Pavement Eng. 9 (2): 81–98. https://doi.org/10.1080/10298430701792128.
Cui, P., S. Wu, Y. Xiao, F. Wang, and F. Wang. 2019. “Quantitative evaluation of active based adhesion in aggregate-asphalt by digital image analysis.” J. Adhes. Sci. Technol. 33 (14): 1544–1557. https://doi.org/10.1080/01694243.2019.1602912.
Huang, S. C., J. F. Branthaver, and R. E. Robertson. 2002. “Interaction of asphalt films with aggregate surfaces in the presence of water.” Road Mater. Pavement Des. 3 (1): 23–48. https://doi.org/10.1080/14680629.2002.9689914.
InstroTek Inc. 2019. “ACT (asphalt compatibility tester).” Accessed July 24, 2019. https://web.archive.org/web/20190724125928/https://cdn.shopify.com/s/files/1/1245/4913/files/ACT_Manual_ver_3.pdf?20.
Kandhal, P. S. 1992. Moisture susceptibility of HMA mixes: Identification of problem and recommended solutions. Auburn, AL: National Center for Asphalt Technology.
Kiggundu, B. M., and F. L. Roberts. 1988. Stripping in HMA mixtures: State of the art and critical review of test methods. Auburn, AL: National Center for Asphalt Technology.
Kim, Y. R., J. S. Lutif, A. Bhasin, and D. N. Little. 2008. “Evaluation of moisture damage mechanisms and effects of hydrated lime in asphalt mixtures through measurements of mixture component properties and performance testing.” J. Mater. Civ. Eng. 20 (10): 659–667. https://doi.org/10.1061/(ASCE)0899-1561(2008)20:10(659).
Lee, J. S. 2014. “Performance-based moisture susceptibility evaluation of warm-mix asphalt concrete through laboratory tests.” Transp. Res. Rec. 2446 (1): 17–28. https://doi.org/10.3141/2446-03.
McCann, M., and P. E. Sebaaly. 2003. “Evaluation of moisture sensitivity and performance of lime in hot-mix asphalt: Resilient modulus, tensile strength, and simple shear tests.” Transp. Res. Rec. 1832 (1): 9–16. https://doi.org/10.3141/1832-02.
Mehrara, A., and A. Khodaii. 2013. “A review of state of the art on stripping phenomenon in asphalt concrete.” Constr. Build. Mater. 38 (Jan): 423–442. https://doi.org/10.1016/j.conbuildmat.2012.08.033.
Merusi, F., A. Caruso, R. Roncella, and F. Giuliani. 2010. “Moisture susceptibility and stripping resistance of asphalt mixtures modified with different synthetic waxes.” Transp. Res. Rec. 2180 (1): 110–120. https://doi.org/10.3141/2180-13.
Mirzababaei, P. 2016. “Effect of zycotherm on moisture susceptibility of warm mix asphalt mixtures prepared with different aggregate types and gradations.” Constr. Build. Mater. 116 (Jul): 403–412. https://doi.org/10.1016/j.conbuildmat.2016.04.143.
MoRT&H (Ministry of Road Transport & Highway). 2013. Specifications of road and bridge works. 5th ed. New Delhi, India: Indian Road Congress.
MS-2 (Manual Series-2). 2014. Asphalt mix design methods. 7th ed. Lexington, KY: Asphalt Institute.
Nazirizad, M., A. Kavussi, and A. Abdi. 2015. “Evaluation of the effects of anti-stripping agents on the performance of asphalt mixtures.” Constr. Build. Mater. 84 (Jun): 348–353. https://doi.org/10.1016/j.conbuildmat.2015.03.024.
Park, D. W., W. J. Seo, J. Kim, and H. V. Vo. 2017. “Evaluation of moisture susceptibility of asphalt mixture using liquid anti-stripping agents.” Constr. Build. Mater. 144 (Jul): 399–405. https://doi.org/10.1016/j.conbuildmat.2017.03.214.
Sebaaly, P. E., E. Hajj, T. Sathanathan, and S. Shivakolunthar. 2012. “Impact of lime and liquid additives on life-cycle cost of asphalt pavements.” In Lime: Building on the 100-year legacy of the ASTM Committee C07. West Conshohocken, PA: ASTM.
Sebaaly, P. E., D. Little, A. Bhasin, and E. Y. Hajj. 2007. “Impact of lime and liquid antistrip agents on properties of Idaho hot-mix asphalt mixture.” Transp. Res. Rec. 1998 (1): 65–74. https://doi.org/10.3141/1998-08.
Sulejmani, P., S. Said, S. Agardh, and A. Ahmed. 2019. “Moisture sensitivity of asphalt mixtures using cycling pore pressure conditioning.” Transp. Res. Rec. 2673 (2): 294–303. https://doi.org/10.1177/0361198118823496.
Yang, W. F. 2014. “Effect and its mechanisms of hydrated lime on water stability of hot asphalt mixture.” In Vol. 842 of Advanced materials research, 22–26. Stafa-Zurich, Switzerland: Trans Tech.
Zhu, C., G. Xu, H. Zhang, F. Xiao, S. Amirkhanian, and C. Wu. 2018. “Influence of different anti-stripping agents on the rheological properties of asphalt binder at high temperature.” Constr. Build. Mater. 164 (Mar): 317–325. https://doi.org/10.1016/j.conbuildmat.2017.12.236.
Zou, J., M. Isola, R. Roque, S. Chun, C. Koh, and G. Lopp. 2013. “Effect of hydrated lime on fracture performance of asphalt mixture.” Constr. Build. Mater. 44 (Jul): 302–308. https://doi.org/10.1016/j.conbuildmat.2013.03.019.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Oct 20, 2020
Accepted: Mar 18, 2021
Published online: Aug 31, 2021
Published in print: Nov 1, 2021
Discussion open until: Jan 31, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Arsalan Raza, Imran Khan, Rana Faisal Tufail, Jana Frankovska, Muhammad Umar Mushtaq, Abdellatif Salmi, Youssef Ahmed Awad, Muhammad Faisal Javed, Evaluation of Moisture Damage Potential in Hot Mix Asphalt Using Polymeric Aggregate Treatment, Materials, 10.3390/ma15155437, 15, 15, (5437), (2022).
- Yuanyuan Li, Jun Li, Chao Li, Anqi Chen, Tao Bai, Shimin Tang, Shaopeng Wu, Yangming Gao, Hongbin Zhu, Jianlin Feng, Strength formation mechanism and performance of steel slag self-compacting epoxy resin concrete, Construction and Building Materials, 10.1016/j.conbuildmat.2022.129525, 359, (129525), (2022).