Influence of Different Dosages of Limestone Dust and Charcoal on the Properties of Lightweight Cement Composites
Publication: Journal of Materials in Civil Engineering
Volume 33, Issue 10
Abstract
This paper presents the characterization of new lightweight cement composites incorporating limestone dust and charcoal. The charcoal is used not only to make the composite lighter in weight but also to improve its hygrothermal performance. Additionally, limestone dust, a waste material, is used instead of sand in the mixtures to improve their sustainability. Results show that the limestone-charcoal-cement composites have low thermal conductivity, while retaining good mechanical strength, high water vapor permeability, and low flammability. It was also found that these composites do not release dangerous substances in concentrations that jeopardize the safety of the environment or human health. Overall, the results suggest that the new limestone-charcoal-cement composites can be applied as lightweight screeds and other construction solutions, such as mortars or plasters that do not require high mechanical strength.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, that support the findings of this study is available from the corresponding author upon reasonable request.
Acknowledgments
The authors are grateful to the Project INOVWALL (POCI-01-0247-FEDER-017889) funded by the Operational Program for Competitiveness and Internationalization (POCI) of Portugal 2020, with the support of the European Regional Development Fund (FEDER). The support provided by the University of Vigo to Guillermo Bastos Costas through a grant that covered a research placement at Itecons is also gratefully acknowledged.
References
Asadi, I., P. Shafigh, Z. F. B. A. Hassan, and N. B. Mahyuddin. 2018. “Thermal conductivity of concrete—A review.” J. Build. Eng. 20 (Nov): 81–93. https://doi.org/10.1016/j.jobe.2018.07.002.
ASTM. 2011. Standard test method for determining specific heat capacity by differential scanning calorimetry. West Conshohocken, PA: ASTM.
Bao, M. Q., M. Morita, and M. Higuchi. 2001. “Utilization of charcoal from wood waste I. Properties of charcoal-cement composite boards.” J. Fac. Agri. Kyushu U. 46 (1): 93–102. https://doi.org/10.5109/24426.
Barnat-Hunek, D., R. Siddique, and G. Łagód. 2017. “Properties of hydrophobised lightweight mortars with expanded cork.” Constr. Build. Mater. 155 (Nov): 15–25. https://doi.org/10.1016/j.conbuildmat.2017.08.052.
Bentz, D. P. 2007. “Transient plane source measurements of the thermal properties of hydrating cement pastes.” Mater. Struct. 40 (10): 1073–1080. https://doi.org/10.1617/s11527-006-9206-9.
CEN (European Committee for Standardization). 2001. Thermal performance of building materials and products. Determination of thermal resistance by means of guarded hot plate and heat flow meter methods. Dry and moist products of medium and low thermal resistance. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2002a. Characterisation of waste—Leaching—Compliance test for leaching of granular waste materials and sludges—Part 2: One stage batch test at a liquid to solid ratio of for materials with particle size below 4 mm (without or with size reduction). Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2002b. Hygrothermal performance of building materials and products—Determination of water absorption coefficient by partial immersion. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2005. Advanced technical ceramics. Monolithic ceramics. Thermo-physical properties. Determination of specific heat capacity. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2008. Tests for mechanical and physical properties of aggregates—Part 7: Determination of the particle density of filler—Pyknometer method. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2009a. Testing hardened concrete—Part 3: Compressive strength of test specimens. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2009b. Testing hardened concrete—Part 5: Flexural strength of test specimens. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2009c. Testing hardened concrete Part 6: Tensile splitting strength of test specimens. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2009d. Testing hardened concrete—Part 7: Density of hardened concrete. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2010. Reaction to fire tests—Ignitability of products subjected to direct impingement of flame—Part 2: Single-flame source test. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2011. Reaction to fire tests—Ignitability of products subjected to direct impingement of flame—Part 2: Single-flame source test—Technical Corrigendum 1. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2012. Tests for geometrical properties of aggregates—Part 1: Determination of particle size distribution—Sieving method. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2014. Reaction to fire tests for building products—Building products excluding floorings exposed to the thermal attack by a single burning item. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2016a. Hygrothermal performance of building materials and products—Determination of water absorption coefficient by partial immersion—Amendment 1. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2016b. Specification for mortar for masonry—Part 1: Rendering and plastering mortar. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2018. Fire classification of construction products and building elements—Part 1: Classification using data from reaction to fire tests. Brussels, Belgium: CEN.
Corinaldesi, A. V. 2016. “Mazzoli and RCharacterization of lightweight mortars containing wood processing by-products waste.” Constr. Build. Mater. 123 (Oct): 281–289. https://doi.org/10.1016/j.conbuildmat.2016.07.011.
Das, O., A. K. Sarmah, and D. Bhattacharyya. 2015. “Structure–mechanics property relationship of waste derived biochars.” Sci. Total Environ. 538 (Dec): 611–620. https://doi.org/10.1016/j.scitotenv.2015.08.073.
Dewald, U., and M. Achternbosch. 2016. “Why more sustainable cements failed so far? Disruptive innovations and their barriers in a basic industry.” Environ. Innov. Soc. Transit. 19 (Jun): 15–30. https://doi.org/10.1016/j.eist.2015.10.001.
Dixit, A., S. Gupta, S. D. Pang, and H. W. Kua. 2019. “Waste Valorisation using biochar for cement replacement and internal curing in ultra-high performance concrete.” J. Clean. Prod. 238 (Nov): 117876. https://doi.org/10.1016/j.jclepro.2019.117876.
Duchesne, J. 2020. “Alternative supplementary cementitious materials for sustainable concrete structures: a review on characterization and properties.” Waste Biomass Valor. 2020 (Apr): 1–18. https://doi.org/10.1007/s12649-020-01068-4.
European Commission. 2003. 2003/33/EC: Council decision of 19 December 2002 establishing criteria and procedures for the acceptance of waste at landfills pursuant to Article 16 of and Annex II to Directive 1999/31/EC. Brussels, Belgium: European Commission.
European Commission. 2010. Europe 2020: A strategy for smart, sustainable and inclusive growth. Brussels, Belgium: European Commission.
European Commission. 2016. Commission recommendation 2016/1318 of 29 July 2016 on guidelines for the promotion of nearly zero-energy buildings and best practices to ensure that, by 2020, all new buildings are nearly zero-energy buildings. Brussels, Belgium: European Commission.
European Commission. 2020. “CP-DS: Legislation on substances in construction products.” Accessed August 31, 2020. https://ec.europa.eu/growth/tools-databases/cp-ds/.
Eurostat. 2012. Eurostat pocketbooks. Energy, transport and environment indicators. 2012 edition. Rue Mercier, Luxembourg: Publications Office of the European Union.
Eurostat. 2017. Eurostat Eurobase data base Final energy consumption by sector—[tsdpc320]. Brussels, Belgium: European Commission.
Felekoglu, B. 2007. “Utilisation of high volumes of limestone quarry wastes in concrete industry (self-compacting concrete case).” Resour. Conserv. Recycl. 51 (4): 770–791. https://doi.org/10.1016/j.resconrec.2006.12.004.
Galetakis, M., and A. Soultana. 2016. “A review on the utilisation of quarry and ornamental stone industry fine by-products in the construction sector.” Constr. Build. Mater. 102 (Jan): 769–781. https://doi.org/10.1016/j.conbuildmat.2015.10.204.
Gupta, M., J. Yang, and C. Roy. 2003. “Specific heat and thermal conductivity of softwood bark and softwood char particles.” Fuel 82 (8): 919–927. https://doi.org/10.1016/S0016-2361(02)00398-8.
Gupta, S., and H. W. Kua. 2017. “Factors determining the potential of biochar as a carbon capturing and sequestering construction material: Critical review.” J. Mater. Civ. Eng. 29 (9): 04017086. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001924.
Gupta, S., and H. W. Kua. 2019. “Carbonaceous micro-filler for cement: Effect of particle size and dosage of biochar on fresh and hardened properties of cement mortar.” Sci. Total Environ. 662 (Apr): 952–962. https://doi.org/10.1016/j.scitotenv.2019.01.269.
Gupta, S., H. W. Kua, and H. J. Koh. 2018. “Application of biochar from food and woodwaste as green admixture for cement mortar.” Sci. Total Environ. 619–620 (Apr): 419–435. https://doi.org/10.1016/j.scitotenv.2017.11.044.
Hawkins, P., P. D. Tennis, and R. J. Detwiler. 2003. The use of limestone in Portland cement: A state-of-the-art review. Skokie, IL: Portland Cement Association.
Horgnies, M., I. Dubois-Brugger, and E. M. Gartner. 2012. “NOx de-pollution by hardened concrete and the influence of activated charcoal additions.” Cem. Concr. Res. 42 (10): 1348–1355. https://doi.org/10.1016/j.cemconres.2012.06.007.
Huang, L., G. Krigsvoll, F. Johansen, Y. Liu, and X. Zhang. 2018. “Carbon emission of global construction sector.” Renew. Sust. Energy Rev. 81 (Jan): 1906–1916. https://doi.org/10.1016/j.rser.2017.06.001.
ICC (International Code Council). 2017. 2018 international building code. Washington, DC: ICC.
ISO. 1991. Thermal insulation—Determination of steady-state thermal resistance and related properties—Guarded hot plate apparatus. Geneva: ISO.
ISO. 2007. Building materials and products—Hygrothermal properties—Tabulated design values and procedures for determining declared and design thermal values. Geneva: ISO.
ISO. 2010. Reaction to fire tests for products—Determination of the gross heat of combustion (calorific value). Geneva: ISO.
ISO. 2014. Plastics—Differential scanning calorimetry (DSC)—Part 4: Determination of specific heat capacity. Geneva: ISO.
ISO. 2016. Hygrothermal performance of building materials and products—Determination of water vapour transmission properties—Cup method. Geneva: ISO.
Juenger, M. C. G., R. Snellings, and S. A. Bernal. 2019. “Supplementary cementitious materials: New sources, characterization, and performance insights.” Cem. Concr. Res. 122 (Aug): 257–273. https://doi.org/10.1016/j.cemconres.2019.05.008.
Karade, S. R. 2016. “Potential of cork cement composite as a thermal insulation material.” Key Eng. Mater. 666 (Oct): 17–29. https://doi.org/10.4028/www.scientific.net/KEM.666.17.
Khedari, J., B. Suttisonk, N. Pratinthong, and J. Hirunlabh. 2001. “New lightweight composite construction materials with low thermal conductivity.” Cem. Concr. Comp. 23 (1): 65–70. https://doi.org/10.1016/S0958-9465(00)00072-X.
Kumar, S., P. Kolay, S. Malla, and S. Mishra. 2011. “Effect of multiwalled carbon nanotubes on mechanical strength of cement paste.” J. Mater. Civ. Eng. 24 (1): 84–91. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000350.
Kwapinski, W., C. M. P. Byrne, E. Kryachko, P. Wolfram, C. Adley, J. J. Leahy, E. H. Novotny, and M. H. B. Hayes. 2010. “Biochar from Biomass and Waste.” Waste Biomass Valori. 1 (2): 177–189. https://doi.org/10.1007/s12649-010-9024-8.
Lakhani, R., R. Kumar, and P. Tomar. 2014. “Utilization of stone waste in the development of value added products: A state of the art review.” J. Eng. Sci. Technol. Rev. 7 (3): 180–187. https://doi.org/10.25103/jestr.073.29.
Lehmann, J., J. Gaunt, and M. Rondon. 2006. “Bio-char sequestration in terrestrial ecosystems—A review.” Mitig. Adapt. Strat. Glob. Change 11 (2): 403–427. https://doi.org/10.1007/s11027-005-9006-5.
Lehmann, J., and S. Joseph. 2009. “Biochar for environmental management: An introduction.” In Biochar for environmental management: Science and technology, 1–12. London: Earthscan.
Licht, S., X. Liu, G. Licht, X. Wang, A. Swesi, and Y. Chan. 2019. “Amplified CO2 reduction of greenhouse gas emissions with C2CNT carbon nanotube composites.” Mater. Today Sustainability 6 (Dec): 100023. https://doi.org/10.1016/j.mtsust.2019.100023.
Lothenbach, B., K. Scrivener, and R. D. Hooton. 2011. “Supplementary cementitious materials.” Cem. Concr. Res. 41 (12): 1244–1256. https://doi.org/10.1016/j.cemconres.2010.12.001.
Miki, M., S. Kohamada, T. Okamuro, T. Kikuchi, and K. Hatakeyama. 2005. “Electromagnetic wave absorption characteristics of cement mortar board containing Bincho-charcoal powder.” J. Jpn. Soc. Powder Metall. 52 (8): 635–639. https://doi.org/10.2497/jjspm.52.635.
Moreira, A., J. António, and A. Tadeu. 2014. “Lightweight Screed containing Cork Granules: Mechanical and Hygrothermal Characterization.” Cem. Concr. Comp. 49 (May): 1–8. https://doi.org/10.1016/j.cemconcomp.2014.01.012.
Newman, J., and P. Owens. 2003. “Properties of lightweight concrete.” In Advanced concrete technology: Constituent materials, edited by J. Newman and B. S. Choo. Oxford, UK: Butterworth-Heinemann.
Novriansyah, A., and T. P. Utama. 2017. “A study of cement additive from varied heating temperature of coconut shell charcoal to increase cement strength.” In Proc., MATEC Web of Conf. Les Ulis, France: EDP Sciences.
Pacheco-Torgal, F. 2014. “Eco-efficient construction and building materials research under the EU Framework Programme Horizon 2020.” Constr. Build. Mater. 51 (Jan): 151–162. https://doi.org/10.1016/j.conbuildmat.2013.10.058.
Peng, L. L. X., and C. H. Ye. 2011. “Temperature- and duration-dependent rice straw-derived biochar: Characteristics and its effects on soil properties of an Ultisol in southern China.” Sun. Soil Tillage Res. 112 (2): 159–166. https://doi.org/10.1016/j.still.2011.01.002.
Pfundstein, M., R. Gellert, M. Spitzner, and A. Rudolphi. 2008. Insulating materials: Principles, materials, applications. Basel, Switzerland: Birkhäuser.
Ramezani, M., Y. H. Kim, and Z. Sun. 2019a. “Modeling the mechanical properties of cementitious materials containing CNTs.” Cem. Concr. Comp. 104 (Nov): 103347. https://doi.org/10.1016/j.cemconcomp.2019.103347.
Ramezani, M., Y. H. Kim, and Z. Sun. 2019b. “Mechanical properties of carbon nanotube reinforced cementitious materials: Database and statistical analysis.” Mag. Concr. Res. 72 (20): 1047–1071. https://doi.org/10.1680/jmacr.19.00093.
Ramos, N. M., J. Q. Delgado, E. Barreira, and V. P. de Freitas. 2009. “Hygrothermal properties applied in numerical simulation: Interstitial condensation analysis.” J. Build. Apprais. 5 (2): 161–170. https://doi.org/10.1057/jba.2009.27.
Rana, A., P. Kalla, H. K. Verma, and J. K. Mohnot. 2016. “Recycling of dimensional stone waste in concrete: A review.” J. Clean. Prod. 135 (Nov): 312–331. https://doi.org/10.1016/j.jclepro.2016.06.126.
Rashad, A. M. 2016. “A comprehensive overview about recycling rubber as fine aggregate replacement in traditional cementitious materials.” Int. J. Sustain. Built. Environ. 5 (1): 46–82. https://doi.org/10.1016/j.ijsbe.2015.11.003.
RILEM. 1978. Functional classification of lightweight concretes: Recommendation LC2. Bagneux, France: RILEM Publications.
Salas, D. A., A. D. Ramirez, C. R. Rodríguez, D. M. Petroche, A. J. Boero, and J. Duque-Rivera. 2016. “Environmental impacts, life cycle assessment and potential improvement measures for cement production: A literature review.” J. Clean. Prod. 113 (Feb): 114–122. https://doi.org/10.1016/j.jclepro.2015.11.078.
Salgado-Delgado, R., A. Olarte-Paredes, A. M. Salgado-Delgado, Z. Vargas-Galarza, T. Lopez-Lara, J. B. Hernández-Zaragoza, I. Rico-Rodríguez, and G. Martínez-Barrera. 2016. “An analysis of the thermal conductivity of composite materials (CPC-30R/charcoal from sugarcane bagasse) using the hot insulated plate technique.” Adv. Mater. Sci. Eng. 2016 (Jan): 4950576. https://doi.org/10.1155/2016/4950576.
Schmidt, H. P. 2012. “55 uses of biochar.” Ithaka J. 1 (May): 286–289.
Schmidt, H.-P. 2013. “Biochar as a building material - cities as carbon sinks.” Accessed March 22, 2019. http://www.ithaka-journal.net/pflanzenkohle-zum-hauser-bauen-stadte-als-kohlenstoffsenken?lang=en.
Shah, S. P., P. Hou, and M. S. Konsta-Gdoutos. 2016. “Nano-modification of cementitious material: Toward a stronger and durable concrete.” J. Sustain. Cem. Based Mater. 5 (1–2): 1–22. https://doi.org/10.1080/21650373.2015.1086286.
Sharan, S., and D. B. Raijiwala. 2017. “Investigations on the properties of coconut shell charcoal concrete.” Int. J. Civ. Eng. Technol. 8 (4): 1376–1383.
Simões, I., N. Simões, and A. Tadeu. 2012. “Thermal delay simulation in multilayer systems using analytical solutions.” Energy Build. 49 (Jun): 631–639. https://doi.org/10.1016/j.enbuild.2012.03.005.
Sirico, A., P. Bernardi, B. Belletti, A. Malcevschi, and E. Moretti. 2020. “Mechanical characterization of cement-based materials containing biochar from gasification.” Constr. Build. Mater. 246 (Jun): 118490. https://doi.org/10.1016/j.conbuildmat.2020.118490.
Tripathi, M., J. N. Sahu, and P. Ganesan. 2016. “Effect of process parameters on production of biochar from biomass waste through pyrolysis: A review.” Renew. Sust. Energ. Rev. 55 (Mar): 467–481. https://doi.org/10.1016/j.rser.2015.10.122.
Turgut, P. 2007. “Cement composites with limestone dust and different grades of wood sawdust.” Build. Environ. 42 (11): 3801–3807. https://doi.org/10.1016/j.buildenv.2006.11.008.
Wang, R., and C. Meyer. 2012. “Performance of cement mortar made with recycled high impact polystyrene.” Cem. Concr. Comp. 34 (9): 975–981. https://doi.org/10.1016/j.cemconcomp.2012.06.014.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: May 29, 2019
Accepted: Feb 16, 2021
Published online: Jul 23, 2021
Published in print: Oct 1, 2021
Discussion open until: Dec 23, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Jesús Alberto Pulido-Arcas, Vicente Flores-Alés, Alexis Pérez-Fargallo, Coating mortars with improved physical properties, economic cost, and carbon footprint, Case Studies in Construction Materials, 10.1016/j.cscm.2022.e01095, 16, (e01095), (2022).