Enhanced Ultrasonic Imaging in Concrete Structures with Spatial Apodization Filters
Publication: Journal of Materials in Civil Engineering
Volume 33, Issue 10
Abstract
Ultrasonic wave–based imaging is a popular nondestructive tool used to inspect RC structures. The inherent heterogeneity of concrete poses a great challenge for imaging incipient damage to concrete. This paper presents an algorithm for improving the quality of images obtained from a considerably reduced data set. A set of RC samples was prepared. The reflections of ultrasonic waves were recorded by placing a transmitter and a receiver on the surface of the concrete. The signals were processed to create an image of a section of the specimens, and the images were enhanced through a set of three-step cascading filters. The spatial apodization (SA) filter is first applied to control the spatial directivity of the ultrasonic transducers. At the second level, a contrast improvement (CI) filter is applied to further reduce ghosting. The third filter is the moving average–based reflection localization filter. Images produced by the algorithm are compared with those produced via conventional techniques in terms of clarity and contrast. It is demonstrated that the cascading filters produce a clearer image with a considerably smaller data set.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or codes that support the findings of this study are available from the corresponding author upon reasonable request.
References
Beniwal, S., and A. Ganguli. 2016. “Localized condition monitoring around rebars using focused ultrasonic field and SAFT.” Res. Nondestr. Eval. 27 (1): 48–67. https://doi.org/10.1080/09349847.2015.1052168.
Beniwal, S., D. Ghosh, and A. Ganguli. 2016. “Ultrasonic imaging of concrete using scattered elastic wave modes.” NDT&E Int. 82 (Sep): 26–35. https://doi.org/10.1016/j.ndteint.2016.04.003.
Blum, F., J. Jarzynski, and L. J. Jacobs. 2005. “A focused two-dimensional air-coupled ultrasonic array for non-contact generation.” NDT&E Int. 38 (8): 634–642. https://doi.org/10.1016/j.ndteint.2005.03.002.
Chimenti, D. 2014. “Review of air-coupled ultrasonic materials characterization.” Ultrasonics 54 (7): 1804–1816. https://doi.org/10.1016/j.ultras.2014.02.006.
Choi, H., J. Bittner, and J. S. Popovics. 2016. “Comparison of ultrasonic imaging techniques for full-scale reinforced concrete.” Transp. Res. Rec. 2592 (1): 126–135. https://doi.org/10.3141/2592-14.
Doctor, S., T. Hall, and L. Reid. 1986. “SAFT—The evolution of a signal processing technology for ultrasonic testing.” NDT Int. 19 (3): 163–167. https://doi.org/10.1016/0308-9126(86)90105-7.
Drinkwater, B. W., and P. D. Wilcox. 2006. “Ultrasonic arrays for non-destructive evaluation: A review.” NDT&E Int. 39 (7): 525–541. https://doi.org/10.1016/j.ndteint.2006.03.006.
Fang, C., K. Lundgren, M. Plos, and K. Gylltoft. 2006. “Bond behaviour of corroded reinforcing steel bars in concrete.” Cem. Concr. Res. 36 (10): 1931–1938. https://doi.org/10.1016/j.cemconres.2006.05.008.
Ganguli, A., C. M. Rappaport, D. Abramo, and S. Wadia-Fascetti. 2012. “Synthetic aperture imaging for flaw detection in a concrete medium.” NDT&E Int. 45 (1): 79–90. https://doi.org/10.1016/j.ndteint.2011.09.004.
Ghosh, D., S. Beniwal, A. Ganguli, and A. Mukherjee. 2018. “Reference free imaging of subsurface cracks in concrete using Rayleigh waves.” Struct. Control Health Monit. 25 (10): e2246. https://doi.org/10.1002/stc.2246.
Ghosh, D., R. Kumar, A. Ganguli, and A. Mukherjee. 2020. “Nondestructive evaluation of rebar corrosion–induced damage in concrete through ultrasonic imaging.” J. Mater. Civ. Eng. 32 (10): 04020294. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003398.
Grohmann, M., S. Müller, E. Niederleithinger, and S. Sieber. 2017. “Reverse time migration: Introducing a new imaging technique for ultrasonic measurements in civil engineering.” Near Surf. Geophys. 15 (3): 242–258. https://doi.org/10.3997/1873-0604.2017006.
Grohmann, M., E. Niederleithinger, and S. Buske. 2016. “Geometry determination of a foundation slab using the ultrasonic echo technique and geophysical migration methods.” J. Nondestr. Eval. 35 (1): 17. https://doi.org/10.1007/s10921-016-0334-z.
Hoegh, K., and L. Khazanovich. 2015. “Extended synthetic aperture focusing technique for ultrasonic imaging of concrete.” NDT&E Int. 74 (Sep): 33–42. https://doi.org/10.1016/j.ndteint.2015.05.001.
Hoegh, K., L. Khazanovich, and H. Yu. 2012. “Concrete pavement joint diagnostics with ultrasonic tomography.” Transp. Res. Rec. 2305 (1): 54–61. https://doi.org/10.3141/2305-06.
Kim, G., C.-W. In, J.-Y. Kim, K. E. Kurtis, and L. J. Jacobs. 2014. “Air-coupled detection of nonlinear Rayleigh surface waves in concrete—Application to microcracking detection.” NDT&E Int. 67 (Oct): 64–70. https://doi.org/10.1016/j.ndteint.2014.07.004.
Krause, M., F. Mielentz, B. Milman, W. Müller, V. Schmitz, and H. Wiggenhauser. 2001. “Ultrasonic imaging of concrete members using an array system.” NDT&E Int. 34 (6): 403–408. https://doi.org/10.1016/S0963-8695(01)00007-X.
Kumar, A. 2020. “Phased array ultrasonic imaging using angle beam virtual source full matrix capture-total focusing method.” Ndt & E Int. 116: 102324.
Langenberg, K., M. Berger, T. Kreutter, K. Mayer, and V. Schmitz. 1986. “Synthetic aperture focusing technique signal processing.” NDT Int. 19 (3): 177–189. https://doi.org/10.1016/0308-9126(86)90107-0.
Li, Z.-W., W.-F. Zhu, X.-Z. Meng, G.-P. Fan, and Y.-L. He. 2020. “Multi-layer imaging method for void defects in ballastless track using forward ray tracing with SAFT.” Measurement 173 (Mar): 108532. https://doi.org/10.1016/j.measurement.2020.108532.
Majhi, S., A. Mukherjee, N. V. George, and B. Uy. 2019. “Corrosion detection in steel bar: A time-frequency approach.” NDT&E Int. 107 (Oct): 102150. https://doi.org/10.1016/j.ndteint.2019.102150.
Mayer, K., K.-J. Langenberg, M. Krause, B. Milmann, and F. Mielentz. 2008. “Characterization of reflector types by phase-sensitive ultrasonic data processing and imaging.” J. Nondestr. Eval. 27 (1–3): 35–45. https://doi.org/10.1007/s10921-008-0035-3.
McCann, D., and M. Forde. 2001. “Review of NDT methods in the assessment of concrete and masonry structures.” NDT&E Int. 34 (2): 71–84. https://doi.org/10.1016/S0963-8695(00)00032-3.
Ohara, Y., M. C. Remillieux, T. Onuma, K. Tsunoda, T. Tsuji, and T. Mihara. 2020. “Toward an ultra-high resolution phased-array system for 3D ultrasonic imaging of solids.” Appl Phys Lett 117 (11): 111902. https://doi.org/10.1063/5.0021282.
Schabowicz, K., and V. Suvorov. 2014. “Nondestructive testing of a bottom surface and construction of its profile by ultrasonic tomography.” Russ. J. Nondestr. Test. 50 (2): 109–119. https://doi.org/10.1134/S1061830914020089.
Schickert, M. 2005. “Progress in ultrasonic imaging of concrete.” Mater. Struct. 38 (9): 807–815. https://doi.org/10.1007/BF02481653.
Shakir-Khalil, H. 1993. “Pushout strength of concrete-filled steel hollow section tubes.” Struct. Eng. 71 (13): 230–243. https://doi.org/10.1134/S1061830914020089.
Sharma, S., and A. Mukherjee. 2010. “Longitudinal guided waves for monitoring chloride corrosion in reinforcing bars in concrete.” Struct. Health Monit. 9 (6): 555–567. https://doi.org/10.1177/1475921710365415.
Sharma, S., and A. Mukherjee. 2011. “Monitoring corrosion in oxide and chloride environments using ultrasonic guided waves.” J. Mater. Civ. Eng. 23 (2): 207–211. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000144.
Sharma, S., and A. Mukherjee. 2013. “Nondestructive evaluation of corrosion in varying environments using guided waves.” Res. Nondestr. Eval. 24 (2): 63–88. https://doi.org/10.1080/09349847.2012.699609.
Staszewski, W. J. 2004. “Structural health monitoring using guided ultrasonic waves.” In Advances in smart technologies in structural engineering, 117–162. New York: Springer.
Tarussov, A., M. Vandry, and A. De La Haza. 2013. “Condition assessment of concrete structures using a new analysis method: Ground-penetrating radar computer-assisted visual interpretation.” Constr. Build. Mater. 38 (January): 1246–1254. https://doi.org/10.1016/j.conbuildmat.2012.05.026.
Tofeldt, O., and N. Ryden. 2018. “Lamb wave phase velocity imaging of concrete plates with 2D arrays.” J. Nondestr. Eval. 37 (1): 4. https://doi.org/10.1007/s10921-017-0457-x.
Wang, C. H., J. T. Rose, and F.-K. Chang. 2004. “A synthetic time-reversal imaging method for structural health monitoring.” Smart Mater. Struct. 13 (2): 415. https://doi.org/10.1088/0964-1726/13/2/020.
Zhu, J., and J. Popovics. 2005. “Non-contact imaging for surface-opening cracks in concrete with air-coupled sensors.” Mater. Struct. 38 (9): 801–806. https://doi.org/10.1007/BF02481652.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 33 • Issue 10 • October 2021
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Mar 27, 2020
Accepted: Feb 9, 2021
Published online: Jul 22, 2021
Published in print: Oct 1, 2021
Discussion open until: Dec 22, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Yikuan Wang, Abhijit Mukherjee, Arnaud Castel, Non-destructive monitoring of incipient corrosion in reinforced concrete with top-bar defect using a combination of electrochemical and ultrasonic techniques, Construction and Building Materials, 10.1016/j.conbuildmat.2022.129346, 360, (129346), (2022).
- Sai Teja Kuchipudi, Debdutta Ghosh, Hina Gupta, Automated Assessment of Reinforced Concrete Elements using Ground Penetrating Radar, Automation in Construction, 10.1016/j.autcon.2022.104378, 140, (104378), (2022).