Correlating the Asphalt-Binder BBR Test Data to the HMA (ML-OT) Fracture Properties
Publication: Journal of Materials in Civil Engineering
Volume 33, Issue 9
Abstract
An asphalt-binder is one of the key constituent elements that significantly influences and controls the fracture behavior and cracking performance of hot-mix asphalt (HMA). In particular, the low-temperature rheological properties of asphalt-binders are critical in terms of improving the HMA fracture properties in the laboratory and ultimately mitigating cracking in the field. The bending beam rheometer (BBR) is one of the most widely used laboratory test methods for evaluating and quantifying the asphalt-binder behavior at low temperatures, mostly using the stiffness (S) and m-value parameters. Using the Texas flexible pavements and overlays database, namely, the Texas data storage system (DSS), as the primary data source, this study was conducted to correlate the asphalt-binder low-temperature rheological properties (measured using the BBR) to the HMA fracture properties. The HMA fracture properties were measured in the laboratory using the monotonic-loading overlay tester (ML-OT). In general, the asphalt-binder low-temperature rheological properties [particularly the stiffness (S)] exhibited promising potential to predict the HMA fracture properties, namely, the tensile strain () and fracture energy index ( Index), with a coefficient of determination () greater than 60%.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The authors thank the Texas Department of Transportation (TxDOT) and the Federal Highway Administration (FHWA) for their support, in particular to the Texas flexible pavements and overlays database (the Texas DSS) project that valuably served as the data source for the work presented in this paper. Special thanks and due gratitude also go to Brett Haggerty (PE) for pioneering the DSS work (Project No. 0-6658) and for his technical guidance during the course of the project.
Disclaimer
The contents of this paper reflect the views of the authors who are solely responsible for the facts and accuracy of the data presented herein and do not necessarily reflect the official views or policies of any agency or institute. This paper does not constitute a standard and/or specification, nor is it intended for design, construction, bidding, contracting, tendering, certification, or permit purposes. Trade names were used solely for information purposes and not for product endorsement, advertisement, promotions, or certification.
References
AASHTO. 2005. Standard method of test for determining the flexural creep stiffness of asphalt binder using the bending beam rheometer (BBR). Washington, DC: AASHTO.
AASHTO. 2015. Standard specification for performance-graded asphalt binder,. Washington, DC: AASHTO.
Alvarez, A. E., N. Macias, and L. G. Fuentes. 2012. “Analysis of connected air voids in warm mix asphalt.” DYNA (Colombia) 79 (172): 29–37.
ASTM. 2016. Standard specification for performance graded asphalt binder. West Conshohocken, PA: ASTM.
ASTM. 2019. Standard test method for determining the flexural creep stiffness of asphalt binder using the bending beam rheometer (BBR). West Conshohocken, PA: ASTM.
Brown, E. R., P. S. Kandhal, and J. Zhang. 2001. Performance testing for hot mix asphalt. Auburn, AL: Auburn Univ.
Faruk, A., X. Hu, Y. Lopez, and L. F. Walubita. 2014. “Using the fracture energy index concept to characterize the HMA cracking resistance potential under monotonic crack testing.” Int. J. Pavement Res. Technol. 7 (1): 40–48. https://doi.org/10.6135/ijprt.org.tw/2014.7(1).40.
Ghuzlan, K. A., and G. G. Al-Khateeb. 2013. “Selection and verification of performance grading for asphalt binders produced in Jordan.” Int. J. Pavement Eng. 14 (2): 116–124. https://doi.org/10.1080/10298436.2011.650697.
Hajj, E. Y., L. G. L. Salazar, and P. E. Sebaaly. 2012. “Methodologies for estimating effective performance grade of asphalt binders in mixtures with high recycled asphalt pavement content.” Transp. Res. Rec. J. Transp. Res. Board 2294 (1): 53–63. https://doi.org/10.3141/2294-06.
Hesp, S. A. M., A. Soleimani, S. Subramani, T. Phillips, D. Smith, P. Marks, and K. K. Tam. 2009. “Asphalt pavement cracking: Analysis of extraordinary life cycle variability in eastern and northeastern Ontario.” Int. J. Pavement Eng. 10 (3): 209–227. https://doi.org/10.1080/10298430802343169.
Hu, X., and L. F. Walubita. 2015. “Influence of asphalt-binder source on CAM mix rutting and cracking performance: A laboratory case study.” Int. J. Pavement Res. Technol. 8 (6): 419–425. https://doi.org/10.6135/ijprt.org.tw/2015.8(6).419.
Lee, S. I., A. N. M. Faruk, and L. F. Walubita. 2016. “Comparison of fracture cracking parameters from monotonic loading tests.” J. Transp. Res. Board 2576 (1): 19–27. https://doi.org/10.3141/2576-03.
Sheng, B., and W. V. Ping. 2016. Evaluation of Florida asphalt mixes for crack resistance properties using the laboratory overlay test procedure. Tallahassee, FL: Florida DOT.
Tabatabaee, H. A., and H. Bahia. 2015. “Field validation of a thermal cracking resistance specification framework for modified asphalt.” J. Transp. Res. Board 2505 (1): 41–47. https://doi.org/10.3141/2505-06.
Tabib, S., O. Khuskivadze, P. Marks, E. Nicol, H. Ding, and S. A. M. Hesp. 2018. “Pavement performance compared with asphalt properties for five contracts in Ontario.” Constr. Build. Mater. 171 (May): 719–725. https://doi.org/10.1016/j.conbuildmat.2018.03.177.
TxDOT (Texas Department of Transportation). 2019. Test procedure for the overlay test—TxDOT designation Tex-248-F, Austin, TX: TxDOT.
TxDOT (Texas Department of Transportation). 2020. Indirect tensile strength test. Austin, TX: TxDOT.
Walubita, L. F. 2006. “Comparison of fatigue analysis approaches for predicting fatigue lives of hot-mix asphalt concrete (HMAC) mixtures.” Doctoral dissertation, Dept. of Civil and Environmental Engineering, Texas A&M Univ.
Walubita, L. F., A. E. Martin, G. S. Cleveland, and R. L. Lytton. 2006a. “Computation of pseudo strain energy and Paris law fracture coefficients from surface energy and uniaxial strain-controlled tension test data.” Int. J. Pavement Eng. 7 (3): 167–178. https://doi.org/10.1080/10298430500501944.
Walubita, L. F., A. E. Martin, S. H. Jung, C. J. Glover, and E. S. Park. 2006b. Application of calibrated mechanistic fatigue analysis with aging effects. Washington, DC: Federal Highway Administration.
Walubita, L. F., A. N. Faruk, G. Das, H. A. Tanvir, J. Zhang, and T. Scullion. 2012. The overlay tester: A sensitivity study to improve repeatability and minimize variability in the test results. Technical Rep. 0-6607-1. College Station, TX: Texas A&M Transportation Institute.
Walubita, L. F., A. N. Faruk, Y. Koohi, R. Luo, and T. Scullion. 2013a. The overlay tester (OT): Comparison with other crack test methods and recommendations for surrogate crack tests. Technical Rep. 0-6607-2. College Station, TX: Texas A&M Transportation Institute.
Walubita, L. F., A. N. M. Faruk, A. E. Alvarez, and T. Scullion. 2013b. “The overlay tester (OT): Using the fracture energy index concept to analyze the OT monotonic loading test data.” Constr. Build. Mater. 40 (Mar): 802–811. https://doi.org/10.1016/j.conbuildmat.2012.11.091.
Walubita, L. F., A. N. M. Faruk, X. Hu, R. Malunga, E. Z. Teshale, and T. Scullion. 2014. “Search for a practical laboratory cracking test for evaluating bituminous (HMA) mixes.” In Proc., Geo-Hubei 2014 Int. Conf. on Sustainable Civil Infrastructure. Reston, VA: ASCE. https://doi.org/10.1061/9780784478462.022.
Walubita, L. F., G. Martinez-Arguelles, H. Chunduri, J. Gonzalez, and L. Fuentes. 2020a. “Statistical evaluation of the material-source effect on the ductility and elastic recovery (ER) of plant-mix extracted asphalt-binders.” Adv. Civ. Eng. 2020 (Oct): 8851691. https://doi.org/10.1155/2020/8851691.
Walubita, L. F., L. Fuentes, A. Prakoso, L. Rico, J. Komba, and B. Naik. 2020b. “Correlating the HWTT laboratory test data to field rutting performance of in-service highway sections.” Constr. Build. Mater. 236 (1): 117552. https://doi.org/10.1016/j.conbuildmat.2019.117552.
Walubita, L. F., L. Fuentes, S. I. Lee, O. Guerrero, E. Mahmoud, B. Naik, and G. S. Simate. 2020c. “Correlations and preliminary validation of the laboratory monotonic overlay test (OT) data to reflective cracking performance of in-service field highway sections.” Constr. Build. Mater. 267 (Jan): 121029. https://doi.org/10.1016/j.conbuildmat.2020.121029.
Walubita, L. F., S. I. Lee, A. N. Faruk, T. Scullion, S. Nazarian, and I. Abdallah. 2017. Texas flexible pavements and overlays: Year 5 report—Complete data documentation technical report 0-6658-3. College Station, TX: Texas A&M Transportation Institute.
Zhang, J., A. N. Faruk, P. Karki, I. Holleran, X. Hu, and L. F. Walubita. 2016. “Relating asphalt binder elastic recovery properties to HMA cracking and fracture properties.” Constr. Build. Mater. 121 (Sep): 236–245. https://doi.org/10.1016/j.conbuildmat.2016.05.157.
Zhang, J., G. S. Simate, X. Hu, M. Souliman, and L. F. Walubita. 2017. “Impact of recycled asphalt materials on asphalt binder properties and rutting and cracking performance of plant-produced mixtures.” Constr. Build. Mater. 155 (Nov): 654–663. https://doi.org/10.1016/j.conbuildmat.2017.08.084.
Zhou, F., S. Hu, T. Scullion, M. Mikhail, and L. F. Walubita. 2007. “A balanced HMA mix design procedure for overlays (with discussion).” J. Assoc. Asphalt Paving Technol. 76(1): 823–850.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: May 21, 2020
Accepted: Jan 29, 2021
Published online: Jul 2, 2021
Published in print: Sep 1, 2021
Discussion open until: Dec 2, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Xiaobing Chen, Wei Wen, Jianguang Zhou, Xiaolong Zhou, Yunfeng Ning, Zhongshan Liang, Zhenyu Ma, Research on the Interaction Capability and Microscopic Interfacial Mechanism between Asphalt-Binder and Steel Slag Aggregate-Filler, Coatings, 10.3390/coatings12121871, 12, 12, (1871), (2022).
- Jiao Yi, Xie Yuanguang, Liu Zhengjia, Optimization design and performance evaluation of a novel asphalt rejuvenator, Frontiers in Materials, 10.3389/fmats.2022.1081858, 9, (2022).
- Meng Ling, Luis Fuentes, Hanqi Liu, Mohamadreza Khalili, Lubinda F. Walubita, Evaluating fatigue resistance based on viscoelastic properties of asphalt mixtures, International Journal of Pavement Engineering, 10.1080/10298436.2022.2126976, (1-16), (2022).
- LongTing Ding, JinSheng Xie, Mengyuan Zhang, Kaixing Zhang, Xuancang Wang, Jia Yang, Study on the properties of easy-compaction and high-durability modified asphalt and mixture, International Journal of Pavement Engineering, 10.1080/10298436.2022.2120987, (1-14), (2022).
- Dong Ruikun, Yang Huifang, Zhao Mengzhen, Hui Wang, Preparation of Asphalt Modifier Made of Waste Tire Crumb Rubber and Waste Cooking Oil, Journal of Materials in Civil Engineering, 10.1061/(ASCE)MT.1943-5533.0004323, 34, 8, (2022).
- Jianhua Yang, Zhengqi Zhang, Jierong Shi, Xinhong Yang, Ying Fang, Comparative analysis of thermal aging behavior and comprehensive performance of high viscosity asphalt (HVA) from cohesion, adhesion and rheology perspectives, Construction and Building Materials, 10.1016/j.conbuildmat.2021.125982, 317, (125982), (2022).