Optimization of the Strength Activity of Rice Husk Ash in Cementitious Mixtures
This article has a reply.
VIEW THE REPLYPublication: Journal of Materials in Civil Engineering
Volume 33, Issue 8
Abstract
In this study, the effects of some of the important manufacturing parameters of rice husk ash (RHA) on its mechanical performance in mortar mixtures is investigated. All of the presented results belong to a comprehensive experimental program where samples of plain and acid-leached rice husks were slowly heated up to 700°C and combusted at such temperature for different lengths of time, from 0.25 to . The obtained ashes were ground for different lengths of time, ranging from 0.33 to , and the resulting pozzolans were replaced for cement at different levels (5%, 10%, and 15% by mass) in mortar mixtures with similar flowabilities. The 28-day compressive strengths of the mortars were measured, and the results were analyzed via regression analysis. The analysis outcome suggests that acid leaching does not necessarily lead to better mechanical performance, and precise optimization of other combustion parameters is needed to improve the performance of RHA. Under optimal conditions (acid leaching followed by combustion at 700°C for ), replacement of 11% cement with such RHA was found to result in approximately 14% greater strength results compared to that of plain RHA-blended mixture and 78% greater strength compared to that of the 100% ordinary portland cement mixture. Despite the significant improvement in strength, it is concluded that acid leaching is not necessarily justifiable considering economic and environmental factors.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
References
ASTM. 2018. Standard specification for concrete aggregates. ASTM C33/C33M-18. West Conshohocken, PA: ASTM.
ASTM. 2019. Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. ASTM C618-19. West Conshohocken, PA: ASTM.
ASTM. 2020a. Standard specification for portland cement. ASTM C150/C150M-20. West Conshohocken, PA: ASTM.
ASTM. 2020b. Standard test method for compressive strength of hydraulic cement mortars (using 2-in. or [50 mm] cube specimens). ASTM C109/C109M-20b. West Conshohocken, PA: ASTM.
ASTM. 2020c. Standard test method for flow of hydraulic cement mortar. ASTM C1437-20. West Conshohocken, PA: ASTM.
Bakar, R. A., R. Yahya, and S. N. Gan. 2016. “Production of high purity amorphous silica from rice husk.” Procedia Chem. 19: 189–195. https://doi.org/10.1016/j.proche.2016.03.092.
Benhelal, E., G. Zahedi, E. Shamsaei, and A. Bahadori. 2013. “Global strategies and potentials to curb CO2 emissions in cement industry.” J. Cleaner Prod. 51 (Jul): 142–161. https://doi.org/10.1016/j.jclepro.2012.10.049.
Chakraverty, A., and S. Kaleemullah. 1991. “Conversion of rice husk into amorphous silica and combustible gas.” Energy Convers. Manage. 32 (6): 565–570. https://doi.org/10.1016/0196-8904(91)90116-Z.
Chakraverty, A., P. Mishra, and H. D. Banerjee. 1988. “Investigation of combustion of raw and acid-leached rice husk for production of pure amorphous white silica.” J. Mater. Sci. 23 (1): 21–24. https://doi.org/10.1007/BF01174029.
Chandra Paul, S., P. B. K. Mbewe, S. Y. Kong, and B. Šavija. 2019. “Agricultural solid waste as source of supplementary cementitious materials in developing countries.” Materials (Basel) 12 (7): 1112. https://doi.org/10.3390/ma12071112.
Chao-Lung, H., B. Le Anh-Tuan, and C. Chun-Tsun. 2011. “Effect of rice husk ash on the strength and durability characteristics of concrete.” Constr. Build. Mater. 25 (9): 3768–3772. https://doi.org/10.1016/j.conbuildmat.2011.04.009.
Conradt, R., P. Pimkhaokham, and U. Leela-Adisorn. 1992. “Nano-structured silica from rice husk.” J. Non-Cryst. Solids 145: 75–79. https://doi.org/10.1016/S0022-3093(05)80433-8.
De Sensale, G. R. 2010. “Effect of rice-husk ash on durability of cementitious materials.” Cem. Concr. Compos. 32 (9): 718–725. https://doi.org/10.1016/j.cemconcomp.2010.07.008.
Feng, Q., H. Yamamichi, M. Shoya, and S. Sugita. 2004. “Study on the pozzolanic properties of rice husk ash by hydrochloric acid pretreatment.” Cem. Concr. Res. 34 (3): 521–526. https://doi.org/10.1016/j.cemconres.2003.09.005.
Fernandes, I. J., D. Calheiro, F. A. Sánchez, A. L. D. Camacho, T. L. A. D. C. Rocha, C. A. M. Moraes, and V. C. D. Sousa. 2017. “Characterization of silica produced from rice husk ash: Comparison of purification and processing methods.” Mater. Res. 20: 512–518. https://doi.org/10.1590/1980-5373-mr-2016-1043.
Food Security Portal. 2016. Rice production. Washington, DC: International Food Policy Research Institute.
Hashem, F. S., M. S. Amin, and S. M. A. El-Gamal. 2013. “Improvement of acid resistance of Portland cement pastes using rice husk ash and cement kiln dust as additives.” J. Therm. Anal. Calorim. 111 (2): 1391–1398. https://doi.org/10.1007/s10973-012-2458-4.
James, J., and M. S. Rao. 1986. “Reactivity of rice husk ash.” Cem. Concr. Res. 16 (3): 296–302. https://doi.org/10.1016/0008-8846(86)90104-3.
Kankariya, C. S., H. S. Patil, S. Bhamre, and M. D. Mhasde. 2017. “Review article: Study and optimization of silica fume in concrete.” Int. J. Recent Trends Eng. Res. 4 (3): 562–565.
Mehta, P. K. 1977. “Properties of blended cements made from rice husk ash.” J. Am. Concr. Inst. 74 (9): 440–442.
Muthadhi, A., R. Anitha, and S. Kothandaraman. 2007. “Rice husk ash-properties and its uses: A review.” J. Inst. Eng. India Civ. Eng. Div. 88 (5): 50–56.
Nair, D. G., A. Fraaij, A. A. K. Klaassen, and A. P. M. Kentgens. 2008. “A structural investigation relating to the pozzolanic activity of rice husk ashes.” Cem. Concr. Res. 38 (6): 861–869. https://doi.org/10.1016/j.cemconres.2007.10.004.
Park, C., A. Salas, C.-W. Chung, and C. J. Lee. 2014. “Freeze-thaw resistance of concrete using acid-leached rice husk ash.” KSCE J. Civ. Eng. 18 (4): 1133–1139. https://doi.org/10.1007/s12205-014-0172-4.
Ramezanianpour, A. A., M. Mahdikhani, and G. Ahmadibeni. 2009. “The effect of rice husk ash on mechanical properties and durability of sustainable concretes.” Int. J. Civ. Eng. 7 (2): 83–91.
Riveros, H., and C. Garza. 1986. “Rice husks as a source of high purity silica.” J. Cryst. Growth 75 (1): 126–131. https://doi.org/10.1016/0022-0248(86)90233-2.
Sankar, S., S. K. Sharma, N. Kaur, B. Lee, D. Y. Kim, S. Lee, and H. Jung. 2016. “Biogenerated silica nanoparticles synthesized from sticky, red, and brown rice husk ashes by a chemical method.” Ceram. Int. 42 (4): 4875–4885. https://doi.org/10.1016/j.ceramint.2015.11.172.
Swamy, R. N., and R. N. Swamy. 1986. Cement replacement materials. Sheffield, UK: Surrey University Press.
Vayghan, A. G., A. R. Khaloo, S. Nasiri, and F. Rajabipour. 2012. “Studies on the effect of retention time of rice husk combustion on the ash’s chemo-physical properties and performance in cement mixtures.” J. Mater. Civ. Eng. 24 (6): 691–697. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000426.
Vayghan, A. G., A. R. Khaloo, and F. Rajabipour. 2013. “The effects of a hydrochloric acid pre-treatment on the physicochemical properties and pozzolanic performance of rice husk ash.” Cem. Concr. Compos. 39 (May): 131–140. https://doi.org/10.1016/j.cemconcomp.2013.03.022.
Wong, Y. S., W. H. Kwan, and M. Lim. 2019. “Enhancing pozzolanic properties of rice husk ash using acid leaching treatment.” In Proc., AIP Conf., 20027. Melville, NY: AIP Publishing LLC.
Worrell, E., L. Price, N. Martin, C. Hendriks, and L. O. Meida. 2001. “Carbon dioxide emissions from the global cement industry.” Annu. Rev. Energy Env. 26 (1): 303–329. https://doi.org/10.1146/annurev.energy.26.1.303.
Xu, W., T. Y. Lo, W. Wang, D. Ouyang, P. Wang, and F. Xing. 2016. “Pozzolanic reactivity of silica fume and ground rice husk ash as reactive silica in a cementitious system: A comparative study.” Materials (Basel) 9 (3): 146. https://doi.org/10.3390/ma9030146.
Xu, W., J. Wei, J. Chen, B. Zhang, P. Xu, J. Ren, and Q. Yu. 2018. “Comparative study of water-leaching and acid-leaching pretreatment on the thermal stability and reactivity of biomass silica for viability as a pozzolanic additive in cement.” Materials (Basel) 11 (9): 1697. https://doi.org/10.3390/ma11091697.
Yalcin, N., and V. Sevinc. 2001. “Studies on silica obtained from rice husk.” Ceram. Int. 27 (2): 219–224. https://doi.org/10.1016/S0272-8842(00)00068-7.
Zain, M. F. M., M. N. Islam, F. Mahmud, and M. Jamil. 2011. “Production of rice husk ash for use in concrete as a supplementary cementitious material.” Constr. Build. Mater. 25 (2): 798–805. https://doi.org/10.1016/j.conbuildmat.2010.07.003.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Jul 27, 2020
Accepted: Jan 11, 2021
Published online: May 17, 2021
Published in print: Aug 1, 2021
Discussion open until: Oct 17, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Vahab Toufigh, Pedram Ghassemi, Morteza Azizmohammadi, Mohsen Ghaemian, Hanieh Rajabi, Parham Ghassemi, Mechanical properties and environmental impact of rubberized fly ash- and red mud-based geopolymer concrete, European Journal of Environmental and Civil Engineering, 10.1080/19648189.2021.2018358, 26, 16, (8091-8114), (2022).
- Osman Gencel, Ahmet Sarı, Gokhan Kaplan, Abid Ustaoglu, Gökhan Hekimoğlu, Oguzhan Yavuz Bayraktar, Togay Ozbakkaloglu, Properties of eco-friendly foam concrete containing PCM impregnated rice husk ash for thermal management of buildings, Journal of Building Engineering, 10.1016/j.jobe.2022.104961, 58, (104961), (2022).
- Bingjiang Chen, Lufeng Pang, Zaibo Zhou, Qingshan Chang, Peng Fu, Study on the activation mechanism and hydration properties of gold tailings activated by mechanical-chemical-thermal coupling, Journal of Building Engineering, 10.1016/j.jobe.2022.104014, 48, (104014), (2022).