Compression Properties of Basalt Fiber–Reinforced Polymer Confined Coconut Shell Concrete
Publication: Journal of Materials in Civil Engineering
Volume 33, Issue 7
Abstract
The compression property of basalt fiber–reinforced polymer (BFRP) confined coconut shell (CS) concrete (CSC) was examined. The mix ratio of plain concrete as reference was fixed to be for water: cement: sand: stone aggregate by weight, while the stone aggregate was replaced with CS by 25%, 50%, 75%, and 100% in volume. Three groups of BFRP tubes, i.e., 2-, 4-, and 6-layer tubes, with a height of 200 mm and an inner diameter of 100 mm were built. An axial compression test was carried out to examine the strength and deformation capacity enhancement of concrete due to BFRP. Strains in the axial direction and hoop direction, axial force, and failure modes were discussed. Results indicated that the strength of CSC decreased quickly with an increase of the CS replacement ratio. However, with the confinement of the BFRP, the strength and deformation capacities were respectively improved by 1.39–2.65 times and 5.53–9.95 times in comparison with that of the plain concrete. The results also indicate that inclusion of CS changed the failure mode, i.e., BFRP confined plain concrete failed with a vertical crack and BFRP confined CSC was damaged with a horizontal crack.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
The data that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors gratefully acknowledge the partial support of this research by the National Key Research and Development Program of China under Grant No. 2016YFC0701100, the National Natural Science Foundation of China under Grant Nos. 51808270 and 51808129, and the Tianjin Basic Research Program under Grant Nos. 17JCYBJC42500, 19JCTPJC53500, and 17YFZCSF01140. The authors also want to thank the China Scholarship Council for the scholarship to enable the first author to have a yearlong research stay at the University of Auckland.
References
ASTM. 2008. Standard test method for tensile properties of polymer matrix composite materials. ASTM. West Conshohocken, PA: ASTM.
ASTM. 2010. Standard test method for compressive strength of cylindrical concrete specimens. West Conshohocken, PA: ASTM.
Chen, W., H. Hao, M. Jong, J. Cui, Y. Shi, L. Chen, and T. M. Pham. 2017. “Quasi-static and dynamic tensile properties of basalt fibre reinforced polymer.” Composites, Part B 125 (Sep): 123–133. https://doi.org/10.1016/j.compositesb.2017.05.069.
Colombo, C., L. Vergani, and M. Burman. 2012. “Static and fatigue characterisation of new basalt fibre reinforced composites.” Compos. Struct. 94 (3): 1165–1174. https://doi.org/10.1016/j.compstruct.2011.10.007.
Gunasekaran, K., R. Annadurai, and P. S. Kumar. 2012. “Long term study on compressive and bond strength of coconut shell aggregate concrete.” Constr. Build. Mater. 28 (1): 208–215. https://doi.org/10.1016/j.conbuildmat.2011.08.072.
Gunasekaran, K., R. Annadurai, and P. S. Kumar. 2013a. “Study on reinforced lightweight coconut shell concrete beam behavior under flexure.” Mater. Des. 46 (Apr): 157–167. https://doi.org/10.1016/j.matdes.2012.09.044.
Gunasekaran, K., R. Annadurai, and P. S. Kumar. 2013b. “Study on reinforced lightweight coconut shell concrete beam behavior under shear.” Mater. Des. 50 (Sep): 293–301. https://doi.org/10.1016/j.matdes.2013.03.022.
Gunasekaran, K., R. Ramasubramani, R. Annadurai, and S. P. Chandar. 2014. “Study on reinforced lightweight coconut shell concrete beam behavior under torsion.” Mater. Des. 57 (May): 374–382. https://doi.org/10.1016/j.matdes.2013.12.058.
Jayaprithika, A., and S. K. Sekar. 2016. “Stress-strain characteristics and flexural behaviour of reinforced eco-friendly coconut shell concrete.” Constr. Build. Mater. 117 (Aug): 244–250. https://doi.org/10.1016/j.conbuildmat.2016.05.016.
Kanojia, A., and S. K. Jain. 2017. “Performance of coconut shell as coarse aggregate in concrete.” Constr. Build. Mater. 140 (Jun): 150–156. https://doi.org/10.1016/j.conbuildmat.2017.02.066.
Lopresto, V., C. Leone, and I. De Iorio. 2011. “Mechanical characterisation of basalt fibre reinforced plastic.” Composites, Part B 42 (4): 717–723. https://doi.org/10.1016/j.compositesb.2011.01.030.
Lv, Y., X. Wu, M. Gao, J. Chen, Y. Zhu, Q. Cheng, and Y. Chen. 2019. “Flexural behavior of basalt fiber reinforced polymer tube confined coconut fiber reinforced concrete.” Adv. Mater. Sci. Eng. 2019 (4): 1–7. https://doi.org/10.1155/2019/1670478.
Lv, Y., X. Wu, Y. Zhu, X. Liang, Q. Cheng, and M. Gao. 2018. “Compression behavior of basalt fiber reinforced polymer tube confined coconut fiber reinforced concrete.” Adv. Mater. Sci. Eng. 2018 (3): 1–10. https://doi.org/10.1155/2018/7982396.
National Standards of People’s Republic of China. 1999. Test method for tensile properties of oriented fiber reinforced plastics. Beijing: State Bureau of Quality and Technical Supervision.
Shafigh, P., H. B. Mahmud, M. Z. Jumaat, and M. Zargar. 2014. “Agricultural wastes as aggregate in concrete mixtures—A review.” Constr. Build. Mater. 53 (Feb): 110–117. https://doi.org/10.1016/j.conbuildmat.2013.11.074.
Vincent, T., and T. Ozbakkaloglu. 2013. “Influence of concrete strength and confinement method on axial compressive behavior of FRP confined high- and ultra high-strength concrete.” Composites, Part B 50 (Jul): 413–428. https://doi.org/10.1016/j.compositesb.2013.02.017.
Wu, G., X. Wang, Z. Wu, Z. Dong, and G. Zhang. 2014. “Durability of basalt fibers and composites in corrosive environments.” J. Compos. Mater. 49 (7): 873–887. https://doi.org/10.1177/0021998314526628.
Wu, Z., X. Wang, K. Iwashita, T. Sasaki, and Y. Hamaguchi. 2010. “Tensile fatigue behaviour of FRP and hybrid FRP sheets.” Composites, Part B 41 (5): 396–402. https://doi.org/10.1016/j.compositesb.2010.02.001.
Yan, Z. D. 2017. “Dynamic behaviour of an interlocking block column made of coconut fibre and shell reinforced concrete.” Master’s thesis, Dept. of Civil and Environmental Engineering, Univ. of Auckland.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: May 9, 2020
Accepted: Dec 10, 2020
Published online: Apr 26, 2021
Published in print: Jul 1, 2021
Discussion open until: Sep 26, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Weiwei Zhu, Qian Li, Haohao Zou, Ying Han, Yu Zhao, Xu Ran, Effect of heat treatment on structure and mechanical properties of basalt fibers and its application for fabrication Cu based composite, Materials Research Express, 10.1088/2053-1591/ac9aa2, 9, 11, (116506), (2022).
- Runze Cai, Hui Qi, Jize Mao, Jianfu Lv, Deqi Jin, Improved Crack Resistance and Pore Structure of Cement-Based Materials by Adding EVA Powder, Journal of Materials in Civil Engineering, 10.1061/(ASCE)MT.1943-5533.0004143, 34, 4, (2022).
- Pang Chen, Zhaoyue Shi, Shaojun Cao, Ping Liu, Xian Rong, Lida Wang, Mechanical properties of alkali-activated slag lightweight aggregate concrete, Journal of Cleaner Production, 10.1016/j.jclepro.2022.132136, 359, (132136), (2022).