Size Effect on the Compressive Strength of Laminated Bamboo Lumber
Publication: Journal of Materials in Civil Engineering
Volume 33, Issue 7
Abstract
The size effect on the axial compressive performance of laminated bamboo lumber is studied through compression tests on three groups of short columns with different heights and section sizes. The failure modes, bearing capacity, strain distribution, and deformation capacity were analyzed. Based on the test results, three groups of stress-strain models of laminated bamboo lumber with different sizes are presented. The simulated results were in good agreement with the test results. The slope method and the parameter method were used to calculate the size effect coefficient and the results showed that the linear regression parameter analysis method is more efficient for analyzing the size effect. It is concluded that the size effect coefficients of compressive strength, ultimate load, elastic modulus, ductility, and compressibility are 0.043 (), 0.6676 (), 0.064 (), 0.0529 (), and 0.133 (), respectively.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
No data, models, or code were generated or used during the study.
Acknowledgments
The writers gratefully acknowledge Ke Zhou, Zhen Wang, Hang Li, Xiaoyan Zheng, Shaoyun Zhu, Liqing Liu, Dunben Sun, Jing Cao, Yanjun Liu, and others from the Nanjing Forestry University for helping with the tests. The research work presented in this paper is supported by the National Natural Science Foundation of China (Nos. 51878354 and 51308301), the Natural Science Foundation of Jiangsu Province (Nos. BK20181402 and BK20130978), the National University Students Practical and Innovation Training Project (Nos. 201810298047Z and 2018NFUSPITP762), Six Talent Peak High-Level Projects of Jiang-su Province (No. JZ-029), and a project funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions. Any research results expressed in this paper are those of the authors and do not necessarily reflect the views of the foundations.
References
Amada, S., Y. Ichikawa, T. Munekata, Y. Nagase, and H. Shimizu. 1997. “Fiber texture and mechanical graded structure of bamboo.” Composites, Part B 28 (1): 3–20. https://doi.org/10.1016/S1359-8368(96)00020-0.
ASTM. 2007. Standard practice for establishing allowable properties for visually-graded dimension lumber from in-grate tests of full-size specimens. ASTM D1990-2007. West Conshohocken, PA: ASTM.
ASTM. 2010. Standard practice for evaluating allowable properties for grades of structural lumber. ASTM D2915-2010. West Conshohocken, PA: ASTM.
ASTM. 2014. Standard test methods for small clear specimens of timber. ASTM D143-2014. West Conshohocken, PA: ASTM.
Barrett, J. D., and H. Griffin. 1989. “Size effects for Candian dimension lumber.” In Vol. 22 of Proc., CIB-W18A Meeting on Timber Structures. Berlin: International Council for Building.
Brito, F. M. S., J. B. Paes, J. T. S. Oliveira, M. D. C. Arantes, G. B. Vidaurre, and V. F. Brocco. 2018. “Physico-mechanical characterization of heat-treated glued laminated bamboo.” Constr. Build. Mater. 190 (Nov): 71. https://doi.org/10.1016/j.conbuildmat.2018.09.057.
Chen, G., J. Wu, H. Jiang, T. Zhou, X. Li, and Y. Yu. 2020a. “Evaluation of OSB webbed laminated bamboo lumber box-shaped joists with a circular web hole.” J. Build. Eng. 29 (May): 101129. https://doi.org/10.1016/j.jobe.2019.101129.
Chen, G., Y. F. Yu, X. Li, and B. He. 2020b. “Mechanical behavior of laminated bamboo lumber for structural application: An experimental investigation.” Eur. J. Wood Wood Prod. 78 (1): 53–63. https://doi.org/10.1007/s00107-019-01486-9.
Chen, S., Y. Wei, Y. F. Hu, Z. X. Zhai, and L. B. Wang. 2020c. “Behavior and strength of rectangular bamboo scrimber columns with shape and slenderness effects.” Mater. Today Commun. 25 (4): 101392. https://doi.org/10.1016/j.mtcomm.2020.101392.
Correal, J. F., J. S. Echeverry, F. Ramírez, and L. E. Yamín. 2014. “Experimental evaluation of physical and mechanical properties of glued laminated guadua angustifolia kunth.” Constr. Build. Mater. 73 (Dec): 105–112. https://doi.org/10.1016/j.conbuildmat.2014.09.056.
Correal, J. F., and F. Ramirez. 2010. “Adhesive bond performance in glue line shear and bending for glued laminated guadua bamboo.” J. Trop. For. Sci. 22 (4): 433–439.
Ding, Y. W., Y. F. Zhang, Z. Wang, Z. Z. Gao, T. Y. Zhang, and X. I. Huang. 2020. “Vibration test and comfort analysis of environmental and impact excitation for wooden floor structure.” Bioresources 15 (14): 8212–8234.
Fei, B. H., R. Liu, X. M. Liu, X. F. Chen, and S. Q. Zhang. 2019. “A review of structure and characterization methods of bamboo pits.” J. For. Eng. 4 (2): 13–18.
Flander, K. D., and R. Rovers. 2008. “One laminated bamboo-frame house per hectare per year.” Constr. Build. Mater. 23 (1): 210–218. https://doi.org/10.1016/j.conbuildmat.2008.01.004.
Hong, C. K., H. T. Li, R. Lorenzo, G. Wu, I. Corbi, O. Corbi, Z. H. Xiong, D. Yang, and H. Z. Zhang. 2019. “Review on connections for original bamboo structures.” J. Renewable Mater. 7 (8): 713–730. https://doi.org/10.32604/jrm.2019.07647.
Krzesinska, M., J. Zachariasz, J. Muszyński, and S. Czajkowska. 2008. “The thermal decomposition studies of solid iron bamboo (Dendrocalamus strictus): Potential precursor for eco-materials.” Bioresour. Technol. 99 (11): 5110–5114. https://doi.org/10.1016/j.biortech.2007.09.050.
Li, H. T., Z. Y. Qiu, G. Wu, D. D. Wei, R. Lorenzo, C. Yuan, H. Z. Zhang, and R. Liu. 2019. “Compression behaviors of parallel bamboo strand lumber under static loading.” J. Renewable Mater. 7 (7): 583–600. https://doi.org/10.32604/jrm.2019.07592.
Li, H. T., J. W. Su, Q. S. Zhang, A. J. Deeks, and D. Hui. 2015. “Mechanical performance of laminated bamboo column under axial compression.” Composites, Part B 79 (Sep): 374–382. https://doi.org/10.1016/j.compositesb.2015.04.027.
Li, H. T., G. Wu, Q. S. Zhang, and J. W. Su. 2016. “Mechanical evaluation for laminated bamboo lumber along two eccentric compression directions.” J. Wood Sci. 62 (6): 503–517. https://doi.org/10.1007/s10086-016-1584-1.
Li, H. T., Y. W. Xuan, B. Xu, and S. H. Li. 2020. “Bamboo application in civil engineering field.” J. For. Eng. 5 (6): 1–10.
Li, H. T., Q. S. Zhang, D. S. Huang, and A. J. Deeks. 2013. “Compressive performance of laminated bamboo.” Composites, Part B 54 (1): 319–328. https://doi.org/10.1016/j.compositesb.2013.05.035.
Lopez, L. F., and J. F. Correal. 2009. “Exploratory study of the glued laminated bamboo Guadua angustifolia as a structural material.” Maderas: Cienc. Tecnol. 11 (3): 171–182.
Lv, Q. F., and Y. Liu. 2019. “Experimental study on the mechanical behavior of BFRP-bamboo composite beam.” Adv. Compos. Lett. 28: 1–13. https://doi.org/10.1177/0963693519867335.
Madsen, B. 1992. Structural behavior of timber. North Vancouver, BC, Canada: Timber Engineering.
Madsen, B. 2011. “Length effects in 38 mm spruce–pine–fir dimension lumber.” Can. J. Civ. Eng. 17 (2): 226–237. https://doi.org/10.1139/l90-028.
Madsen, B., and A. H. Buchanan. 1986. “Size effects in timber explained by a modified weakest link theory.” Can. J. Civ. Eng. 13 (2): 218–232. https://doi.org/10.1139/l86-030.
Mahdavi, M., P. L. Clouston, and S. R. Arwade. 2011. “Development of laminated bamboo lumber: Review of processing, performance, and economical considerations.” J. Mater. Civ. Eng. 23 (7): 1036. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000253.
Mahdavi, M., P. L. Clouston, and S. R. Arwade. 2012. “A low-technology approach toward fabrication of laminated bamboo lumber.” Constr. Build. Mater. 29 (Apr): 257–262. https://doi.org/10.1016/j.conbuildmat.2011.10.046.
Monteiro, S. N., F. M. Margem, F. O. Braga, F. S. Luz, and N. T. Simonassi. 2017. “Weibull analysis of the tensile strength dependence with fiber diameter of giant bamboo.” J. Mater. Res. Technol. 6 (4): 317–322. https://doi.org/10.1016/j.jmrt.2017.07.001.
Nugroho, N., and N. Ando. 2001. “Development of structural composite products made from bamboo II: Fundamental properties of laminated bamboo lumber.” J. Wood Sci. 47 (3): 237–242. https://doi.org/10.1007/BF01171228.
Porras, A., and A. Maranon. 2012. “Development and characterization of a laminate composite material from polylactic acid (PLA) and woven bamboo fabric.” Composites, Part B 43 (7): 2782–2788. https://doi.org/10.1016/j.compositesb.2012.04.039.
Ramberg, W., and W. R. Osgood. 1943. Description of stress-strain cruves by three parameters. Washington, DC: National Advisory Committee for Aeronautics.
Sharma, B. 2017. “Mechanical characterisation of structural laminated bamboo.” Proc. Inst. Civ. Eng. Struct. Build. 170 (4): 250–264. https://doi.org/10.1680/jstbu.16.00061.
Sharma, B., A. Gatóo, and M. H. Ramage. 2015. “Effect of processing methods on the mechanical properties of engineered bamboo.” Constr. Build. Mater. 83 (May): 95–101. https://doi.org/10.1016/j.conbuildmat.2015.02.048.
Sinha, A., D. Way, and S. Mlasko. 2014. “Structural performance of glued laminated bamboo beams.” J. Struct. Eng. 140 (1): 04013021. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000807.
Sulaiman, O., R. Hashim, R. Wahab, Z. A. Ismail, H. W. Samsi, and A. Mohamed. 2006. “Evaluation of shear strength of oil treated laminated bamboo.” Bioresour. Technol. 97 (18): 2466–2469. https://doi.org/10.1016/j.biortech.2005.10.026.
Sun, X. F., M. J. He, and Z. Li. 2020. “Novel engineered wood and bamboo composites for structural applications: State-of-art of manufacturing technology and mechanical performance evaluation.” Constr. Build. Mater. 249 (Jul): 118751. https://doi.org/10.1016/j.conbuildmat.2020.118751.
Verma, C. S., and V. M. Chariar. 2012. “Development of layered laminate bamboo composite and their mechanical properties.” Composites, Part B 43 (3): 1063–1069. https://doi.org/10.1016/j.compositesb.2011.11.065.
Verma, C. S., and V. M. Chariar. 2013. “Stiffness and strength analysis of four layered laminate bamboo composite at macroscopic scale.” Composites, Part B 45 (1): 369–376. https://doi.org/10.1016/j.compositesb.2012.07.048.
Wang, F., and J. X. Shao. 2014. “Modified Weibull distribution for analyzing the tensile strength of bamboo fiber.” Polymers 6 (12): 3005–3018. https://doi.org/10.3390/polym6123005.
Wang, Z., L. Rodolfo, I. Corbi, O. Corbi, and C. H. Fang. 2020. “Review on bond properties between wood and fiber reinforced polymer.” J. Renewable Mater. 8 (8): 993–1018. https://doi.org/10.32604/jrm.2020.012488.
Wei, X., F. M. Chen, and G. Wang. 2020. “Flexibility characterization of bamboo slivers through winding-based bending stiffenss method.” J. For. Eng. 5 (2): 48–53.
Weibull, W. 1939. A statistical theory of the strength of materials. Stockholm, Sweden: Generalstabens Litografiska Anstalts Förlag.
Wu, W. Q. 2014. “Experimental analysis of bending resistance of bamboo composite I—Shaped beam.” J. Bridge Eng. 19 (4): 04013014. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000557.
Xu, M., Z. Y. Cui, L. H. Tu, Q. L. Xia, and Z. F. Chen. 2019. “The effect of elevated temperatures on the mechanical properties of laminated bamboo.” Constr. Build. Mater. 226 (Nov): 32–43. https://doi.org/10.1016/j.conbuildmat.2019.07.274.
Yang, D., H. T. Li, Z. H. Xiong, L. Mimendi, R. Lorenzo, I. Corbi, O. Corbi, and C. K. Hong. 2020 “Mechanical properties of laminated bamboo under off-axis compression.” Composites, Part A 138 (Nov): 106042. https://doi.org/10.1016/j.compositesa.2020.106042.
Zhang, Y. P., X. G. Wang, N. Pan, and R. Postle. 2002. “Weibull analysis of the tensile behavior of fibers with geometrical irregularities.” J. Mater. Sci. 37 (7): 1401–1406. https://doi.org/10.1023/A:1014580814803.
Zhao, P. Y., and X. P. Zhang. 2019. “Size effect of section on ultimate compressive strength parallel to grain of structural bamboo scrimber.” Constr. Build. Mater. 200 (Mar): 586–590. https://doi.org/10.1016/j.conbuildmat.2018.12.088.
Zhou, H. B., J. H. Jiang, X. S. Wang, and H. Q. Ren. 2012. “Size effects of width on tensile strength of visually-graded Chinese larch lumber.” J. Beijing For. Univ. 34 (1): 127–130.
Zhou, H. B., H. Q. Ren, J. X. Lu, J. H. Jiang, and X. S. Wang. 2010. “Length effect on the tension strength between mechanically graded high- and low-grade Chinese fir lumber.” For. Prod. J. 60 (2): 144–149. https://doi.org/10.13073/0015-7473-60.2.144.
Zhou, N. Q., G. Q. Zhang, D. S. Huang, S. X. Jiang, and Q. S. Zhang. 2019. “Examination of dynamic characteristics of new bamboo structure by impact hammer test.” J. For. Eng. 4 (2): 54–60.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Jul 13, 2020
Accepted: Nov 25, 2020
Published online: May 4, 2021
Published in print: Jul 1, 2021
Discussion open until: Oct 4, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Dong Yang, Haitao Li, Rodolfo Lorenzo, Conggan Yuan, Chaokun Hong, Yue Chen, Basic Mechanical Properties of Laminated Flattened-Bamboo Composite: An Experimental and Parametric Investigation, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-15549, 35, 8, (2023).
- Stephen M. Walley, Samuel J. Rogers, Is Wood a Material? Taking the Size Effect Seriously, Materials, 10.3390/ma15155403, 15, 15, (5403), (2022).
- Ting Wang, Zhiqiang Wang, Yin Yang, Jianhui Zhou, Acoustic Emission Characteristics of Different Bamboo and Wood Materials in Bending Failure Process, Journal of Renewable Materials, 10.32604/jrm.2022.017955, 10, 2, (527-540), (2022).
- Chaokun Hong, Haitao Li, Dong Yang, Xin Li, Rodolfo Lorenzo, Mahmud Ashraf, Laminated bamboo lumber in compression perpendicular to the grain direction: Experimental investigation and the finite element analysis, Wood Material Science & Engineering, 10.1080/17480272.2022.2129447, (1-17), (2022).
- Mingqian Wang, Xi Chen, Qingfeng Xu, Kent A. Harries, Yubing Leng, Lingzhu Chen, Numerical Simulation and Variability Analysis of Mechanical Behavior of Braced Glulam Frames, Journal of Structural Engineering, 10.1061/(ASCE)ST.1943-541X.0003466, 148, 10, (2022).
- Chen Chen, Haitao Li, Ke Zhou, Assima Dauletbek, Zhenhua Xiong, Rodolfo Lorenzo, Mahmud Ashraf, Behavior of CFRP-Strengthened Chamfered Laminated Bamboo Lumber under Eccentric Compression, Journal of Composites for Construction, 10.1061/(ASCE)CC.1943-5614.0001197, 26, 2, (2022).
- Zhaoyan Cui, Siyuan Tang, Ming Xu, Dongsheng Huang, Zicheng Zhang, Experimental and theoretical study on mechanical performance of dowel joints with inserted steel plates constructed of laminated bamboo lumber, Journal of Building Engineering, 10.1016/j.jobe.2022.105320, 61, (105320), (2022).
- Zhaoyan Cui, Dongsheng Huang, Zirui Huang, Mei-Ling Zhuang, Ming Xu, Experimental investigation and calculation method for the bearing capability of bolt steel-to-laminated bamboo connections under the coupling of bending moment and shear force, Journal of Building Engineering, 10.1016/j.jobe.2022.105126, 59, (105126), (2022).
- Gensheng Cheng, Haitao Li, Hang Li, Mahmud Ashraf, Compression resistance of short LBL columns with local damage after retrofitting using basalt fiber reinforced polymer, Journal of Building Engineering, 10.1016/j.jobe.2021.103941, 48, (103941), (2022).
- Xuhong Zhou, Pengcheng Liu, Qishi Zhou, Ping Xiang, Hai Zhang, Jiefu Tian, Study on the tension and compression stress-strain relationship of Phyllostachys Edulis bamboo parallel to the grain, Industrial Crops and Products, 10.1016/j.indcrop.2022.114548, 177, (114548), (2022).
- See more