Influence of Compound Action of Rubber Powder and SBS on High-Temperature Performance of Asphalt Pavement Surface
Publication: Journal of Materials in Civil Engineering
Volume 33, Issue 6
Abstract
Due to the increase in the number of vehicles on the road, the amount of used vehicle tires has also increased exponentially. Making tires into rubber powder and adding them into asphalt, which forms asphalt rubber as a kind of asphalt binder of asphalt pavement surface, is an effective way of using waste tires. Styrenic block copolymers (SBS) can improve high-temperature performance of asphalt as a kind of polymer additive. Comprehensive recycling rubber powder and SBS in asphalt mixture can not only make use of waste tires, but also expand the application of waste materials and compose environmentally friendly mixture for the asphalt pavement surface, which improves service life and service function of asphalt pavements. In order to evaluate the high-temperature performance improvement of composite-modified asphalt material, three different asphalt binders and two different asphalt mixture types were selected and the related tests were conducted. The results show that for the mixture of SMA-13 and SMA-16, composite-modified asphalt mixture had better high-temperature performance than asphalt rubber mixture, but worse than SBS asphalt. In addition, the crumb rubber (CR)/SBS composite-modified asphalt had a large internal friction angle, which could give better cohesive force for aggregate gradation. Finally, CR/SBS composite-modified asphalt had the smallest reduction rate from 50°C to 70°C. This study identifies that compound action of rubber powder and SBS is an optimal choice for asphalt pavement surface in high-temperature season. It provides a wider range of applications for asphalt rubber in the road construction field, which also realizes waste cyclic utilization and environmental protection.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, or code generated or used during the study appear in the published paper.
References
Alireza, A., J. Maher, and A. Mosavi. 2020. “Performance evaluation of binders and stone matrix asphalt (SMA) mixtures modified by ground tire rubber (GTR), waste Polyethylene Terephthalate (PET) and anti stripping agents (ASAs).” Constr. Build. Mater. 251 (Aug): 118932. https://doi.org/10.1016/j.conbuildmat.2020.118932.
Chen, Z., P. Guo, and J. Zhang. 2017. “Study on measures to improve high temperature stability of rubber asphalt mixture.” Pet. Asphalt 31 (1): 41–44.
Ding, X., T. Ma, and W. Zhang. 2017. “Experimental study of stable crumb rubber asphalt and asphalt mixture.” Constr. Build. Mater. 157 (Dec): 975–981. https://doi.org/10.1016/j.conbuildmat.2017.09.164.
Fontes, L. P., G. Trichês, J. C. Pais, and P. A. Pereira. 2010. “Evaluating permanent deformation in asphalt rubber mixtures.” Constr. Build. Mater. 24 (7):1193–1200. https://doi.org/10.1016/j.conbuildmat.2009.12.021.
Guan, B., J. Liu, and H. Zhao. 2019. “Investigation of the microwave absorption of asphalt mixtures containing magnetite powder.” Coatings 9 (12): 813. https://doi.org/10.3390/coatings9120813.
Guo, F., J. P. Zhang, and J. Z. Pei. 2020. “Investigating the interaction behavior between asphalt binder and rubber in rubber asphalt by molecular dynamics simulation.” Constr. Build. Mater. 252 (Aug): 118956. https://doi.org/10.1016/j.conbuildmat.2020.118956.
Guo, L., Z. Q. Zhang, and W. Zhang. 2012. “Study on the mucilage performance of rubber asphalt based on high temperature properties and bond behavior.” J. Wuhan Univ. Technol. 34 (1): 46–51.
Jiang, W., J. Xiao, D. Yuan, and H. Lu. 2018. “Design and experiment of thermoelectric asphalt pavements with power-generation and temperature-reduction functions.” Energy Build. 169 (Jun): 39–47. https://doi.org/10.1016/j.enbuild.2018.03.049.
Lertloypanyachai, P., and S. Thongsang. 2018. “Improving the mechanical properties of rubber floor tiles by rock powder particle as filler in natural rubber.” Mater. Today: Proc. 5 (7): 14907–14911. https://doi.org/10.1016/j.matpr.2018.04.028.
Li, H., B. Dong, and D. Zhao. 2019a. “Physical, rheological and stability properties of desulfurized rubber asphalt and crumb rubber asphalt.” Arab. J. Sci. Eng. 44 (5): 5043–5056. https://doi.org/10.1007/s13369-018-3684-2.
Li, H., G. Liu, and B. Dong. 2019b. “Research on the development and regeneration performance of asphalt rejuvenator based on the mixed waste engine oil and waste cooking oil.” Int. J. Pavement Res. Technol. 12 (3): 336–346. https://doi.org/10.1007/s42947-019-0040-1.
Li, H., W. Wang, and W. Li. 2019c. “Replacement of limestone with volcanic stone in asphalt mastic used for road pavement.” Arab. J. Sci. Eng. 44 (10): 8629–8644. https://doi.org/10.1007/s13369-019-04028-w.
Ling, P., K. Liu, and S. Wu. 2014. “Effect of LDHs on the aging resistance of crumb rubber modified asphalt.” Constr. Build. Mater. 67 (Sep): 239–243. https://doi.org/10.1016/j.conbuildmat.2013.10.040.
Ministry of transport of the people's Republic of China. 2004. Technical specification for construction of highway asphalt pavements. JTG F40. Beijing: Ministry of transport of the people's Republic of China.
Ministry of transport of the people's Republic of China. 2011. Standard test methods of bitumen and bituminous mixtures for highway engineering. JTG E20. Beijing: Ministry of transport of the people's Republic of China.
Msallam, M., and I. Asi. 2018. “Improvement of local asphalt concrete binders using crumb rubber.” J. Mater. Civ. Eng. 30 (4): 04018048. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002238.
Muhammad, I., A. Yasir, and A. Sarfraz. 2017. “Performance evaluation of crumb rubber-modified asphalt mixtures based on laboratory and field investigations.” Arab. J. Sci. Eng. 43 (4): 1–12. https://doi.org/10.1007/s13369-017-2729-2.
Qian, C., and W. Z. Fan. 2020. “Evaluation and characterization of properties of crumb rubber/SBS modified asphalt.” Mater. Chem. Phys. 253 (Jun): 123319. https://doi.org/10.1016/j.matchemphys.2020.123319.
Quan, L., H. Weidong, and C. Chongchong. 2014. “Properties and application of terminal blending rubber asphalt.” J. Chongqing Jiaotong Univ. 33 (1): 51–55. https://doi.org/10.3969/j.issn.1674-0696.2014.04.11.
Sheng, Y. P., B. Li, and J. G. Geng. 2017. “Production and performance of desulfurized rubber asphalt binder.” Int. J. Pavement Res. Technol. 10 (3): 262–273. https://doi.org/10.1016/j.ijprt.2017.02.002.
Sheng, Y. P., Y. C. Wu, and Y. Yan. 2020. “Development of environmentally friendly flame retardant to achieve low flammability for asphalt binder used in tunnel pavements.” J. Cleaner Prod. 257 (Jun): 120487. https://doi.org/10.1016/j.jclepro.2020.120487.
Song, J., F. Chen, and G. X. Guo. 2020. “Research on self-healing technology of SBS modified asphalt concrete under the dynamic loading.” Integr. Ferroelectr. 207 (1): 12–26. https://doi.org/10.1080/10584587.2020.1728661.
Song, J. N., Z. Y. Huang, and X. H. Xu. 2012. “Comparative study on basic properties of rubber powder/SBS composite modified asphalt and SBS modified asphalt and rubber asphalt.” Northern Transp. 7 (1): 3–5. https://doi.org/10.15996/j.cnki.bfjt.2012.07.001.
Wang, L., Y. Xing, and C. Q. Chang. 2011. “Experimental study on temperature characteristic of compound crumb rubber modified asphalt and mixture.” Adv. Mater. Res. 446 (3): 3647–3651. https://doi.org/10.1016/j.conbuildmat.2017.09.164.
Wang, T., F. P. Xiao, and X. Y. Zhu. 2018. “Energy consumption and environmental impact of rubberized asphalt pavement.” J. Cleaner Prod. 180 (Apr): 139–158. https://doi.org/10.1016/j.jclepro.2018.01.086.
Wu, Y. S., and Q. C. He. 2015. “Sensitivity analysis of factors influencing high temperature performance of rubber asphalt mixture.” Western Transp. Technol. 38 (4): 18–20. https://doi.org/10.13282/j.cnki.wccst.2015.04.005.
Xiao, C. 2009. Research on high temperature performance and construction technology of rubber asphalt and mixture. Chongqing, China: Chongqing Jiaotong Univ.
Xiao, C., T. Ling, and Y. Qiu. 2013. “Optimization of technical measures for improving high-temperature performance of asphalt-rubber mixture.” J. Mod. Transp. 21 (4): 273–280. https://doi.org/10.1007/s40534-013-0023-x.
Xiao, F., S. Amirkhanian, and C. H. Juang. 2007. “Rutting resistance of rubberized asphalt concrete pavements containing reclaimed asphalt pavement mixtures.” J. Mater. Civ. Eng. 19 (6): 475–483. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:6(475).
Xiao, F., S. Amirkhanian, and B. Putman. 2010. “Laboratory investigation of engineering properties of rubberized asphalt mixtures containing reclaimed asphalt pavement.” Can. J. Civ. Eng. 37 (11): 1414–1422. https://doi.org/10.1139/L10-070.
Zhang, J., H. Mi, and Z. H. Chen. 2018a. “Experimental study of composite rubber asphalt based on high temperature performance.” Pet. Asphalt 32 (Jan): 40–44.
Zhang, X., B. Zhang, and H. Chen. 2018b. “Feasibility evaluation of preparing asphalt mixture with low-grade aggregate, rubber asphalt and desulphurization gypsum residues.” Materials 11 (8): 1481. https://doi.org/10.3390/ma11081481.
Zhang, Y. S., Q. L. Li, and J. Z. Dong. 2014. “Study on performance of rubber powder modified asphalt mixture.” Key Eng. Mater. 599 (4): 252–256. https://doi.org/10.4028/www.scientific.net/KEM.599.252.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Apr 20, 2020
Accepted: Oct 20, 2020
Published online: Mar 30, 2021
Published in print: Jun 1, 2021
Discussion open until: Aug 30, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.