Double Edge Wedge Splitting Test to Characterize the Design Postcracking Parameters of Fiber-Reinforced Concrete Subjected to High Temperatures
This article has been corrected.
VIEW CORRECTIONPublication: Journal of Materials in Civil Engineering
Volume 33, Issue 5
Abstract
The determination of the postcrack tensile properties of steel fiber–reinforced concrete (SFRC) after exposure to elevated temperatures is a current methodological challenge. The objective of this research is to evaluate the applicability of the double edge wedge splitting (DEWS) test to characterize the postcrack tensile properties of SFRC after exposure to elevated temperatures. Results show that the DEWS test has reduced scatter and facilitates the interpretation of results with diminished frictional interaction between the apparatus and the specimen. The results in terms of coefficient of mechanical degradation were comparable to those obtained by bending tests in literature, which highlights the suitability of the DEWS test to be adopted in future researches and guidelines. The postcrack tensile properties were not significantly affected up to and a linear reduction ratio was verified with the increase in temperature. Additionally, the constitutive model proposed may reproduce the effect of temperature on the tensile stress-strain behavior of the SFRC and is a valuable input for hygro-thermo-mechanical numerical models oriented to simulate the mechanical behavior of structures made with SFRC.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The first and second authors would like to thank the Institute for Technological Research (IPT) and its foundation (FIPT) for their financial and institutional support though the New Talents Program N.01/2017 and N.01/2018, respectively. This work was partially supported by the Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) [Grant No. 2017/00125-9 (Renan P. Salvador)] and the Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) [Grant No. 305055/2019-4 (Antonio Domingues de Figueiredo)]. The authors would also like to thank their colleague Dr. Renata Monte for her valuable technical contribution to this work.
References
Abdallah, S., M. Fan, and K. A. Cashell. 2017a. “Pull-out behaviour of straight and hooked-end steel fibres under elevated temperatures.” Cem. Concr. Res. 95 (May): 132–140. https://doi.org/10.1016/j.cemconres.2017.02.010.
Abdallah, S., M. Fan, and D. W. A. Rees. 2017b. “Effect of elevated temperature on pull-out behaviour of 4DH/5DH hooked end steel fibres.” Compos. Struct. 165 (Apr): 180–191. https://doi.org/10.1016/j.compstruct.2017.01.005.
Alonso, C., and L. Fernandez. 2004. “Dehydration and rehydration processes of cement paste exposed to high temperature environments.” J. Mater. Sci. 39 (9): 3015–3024. https://doi.org/10.1023/B:JMSC.0000025827.65956.18.
ASTM. 2012. Standard test method for flexural performance of fiber-reinforced concrete (using beam with third-point loading). ASTM C1609. West Conshohocken, PA: ASTM.
Bažant, Z. P., and M. F. Kaplan. 1996. Concrete at high temperatures: Material properties and mathematical models. Harlow, UK: Longman.
Bernard, E. S. 2019. “Predicting crack widths in FRC/reinforced concrete members using small deformation post-crack parameters.” Struct. Concr. 20 (6): 2138–2149. https://doi.org/10.1002/suco.201900083.
Borges, L. A. C., R. Monte, D. A. S. Rambo, and A. D. de Figueiredo. 2019. “Evaluation of post-cracking behavior of fiber reinforced concrete using indirect tension test.” Constr. Build. Mater. 204 (Apr): 510–519. https://doi.org/10.1016/j.conbuildmat.2019.01.158.
Carpio, J. M., R. Serafini, D. Rambo, A. de la Fuente, and A. D. De Figueiredo. 2019. “Assessment of the bearing capacity reduction of FRC elements subjected to fire.” In Proc., fib Symp. 2019: Concrete—Innovations in Materials, Design and Structures, 1378–1386. Lausanne, Switzerland: International Federation for Structural Concrete.
CEN (European Committee for Standardization). 2004. Eurocode 2: Design of concrete structures—Part 1–2: General rules—Structural fire design. BS EN 1992-1-2. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2007. Test method for metallic fibred concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual). EN 14651. Brussels, Belgium: CEN.
Chen, B., and J. Liu. 2004. “Residual strength of hybrid-fiber-reinforced high-strength concrete after exposure to high temperatures.” Cem. Concr. Res. 34 (6): 1065–1069. https://doi.org/10.1016/j.cemconres.2003.11.010.
Choumanidis, D., E. Badogiannis, P. Nomikos, and A. Sofianos. 2016. “The effect of different fibres on the flexural behaviour of concrete exposed to normal and elevated temperatures.” Constr. Build. Mater. 129 (Dec): 266–277. https://doi.org/10.1016/j.conbuildmat.2016.10.089.
Choumanidis, D., E. Badogiannis, P. Nomikos, and A. Sofianos. 2017. “Barcelona test for the evaluation of the mechanical properties of single and hybrid FRC, exposed to elevated temperature.” Constr. Build. Mater. 138 (May): 296–305. https://doi.org/10.1016/j.conbuildmat.2017.01.115.
CNR (National Research Council). 2007. Guide for the design and construction of fibre-reinforced concrete structures. CNR-DT 204. Rome: CNR.
Colombo, M., M. di Prisco, and R. Felicetti. 2010. “Mechanical properties of steel fibre reinforced concrete exposed at high temperatures.” Mater. Struct. 43 (4): 475–491. https://doi.org/10.1617/s11527-009-9504-0.
Colombo, M., M. di Prisco, and R. Felicetti. 2015. “SFRC exposed to high temperature: Hot vs. residual characterization for thin walled elements.” Cem. Concr. Compos. 58 (Apr): 81–94. https://doi.org/10.1016/j.cemconcomp.2015.01.002.
de Bussab, W. O., and P. A. Morettin. 2017. Estatística básica. São Paulo, Brazil: Saraiva.
de la Fuente, A., A. Aguado, C. Molins, and J. Armengou. 2011. “Innovations on components and testing for precast panels to be used in reinforced earth retaining walls.” Constr. Build. Mater. 25 (5): 2198–2205. https://doi.org/10.1016/j.conbuildmat.2010.11.003.
de la Fuente, A., P. Pujadas, A. Blanco, and A. Aguado. 2012. “Experiences in Barcelona with the use of fibres in segmental linings.” Tunnelling Underground Space Technol. 27 (1): 60–71. https://doi.org/10.1016/j.tust.2011.07.001.
Di Carlo, F., A. Meda, and Z. Rinaldi. 2018. “Evaluation of the bearing capacity of fiber reinforced concrete sections under fire exposure.” Mater. Struct. 51 (6): 154. https://doi.org/10.1617/s11527-018-1280-2.
di Prisco, M., L. Ferrara, and M. G. L. Lamperti. 2013. “Double edge wedge splitting (DEWS): An indirect tension test to identify post-cracking behaviour of fibre reinforced cementitious composites.” Mater. Struct. 46 (11): 1893–1918. https://doi.org/10.1617/s11527-013-0028-2.
di Prisco, M., G. Plizzari, and L. Vandewalle. 2009. “Fibre reinforced concrete: New design perspectives.” Mater. Struct. 42 (9): 1261–1281. https://doi.org/10.1617/s11527-009-9529-4.
di Prisco, M., G. Plizzari, and L. Vandewalle. 2010. “Fiber reinforced concrete in the new fib model code.” In Proc., 3rd fib Int. Congress Incorporating the PCI Annual Convention and Bridge Conf. 2010. Chicago: Precast/Prestressed Concrete Institute.
di Prisco, M., and G. Toniolo. 2000. “Structural applications of steel fibre reinforced concrete.” In Proc., Int. Workshop CTE. Milan, Italy: CTE Press.
fib (Federation Internationale du Beton). 2013. Model code for concrete structures 2010, 434. New York: Wiley.
Galeote, E., A. Blanco, S. H. P. Cavalaro, and A. de la Fuente. 2017. “Correlation between the Barcelona test and the bending test in fibre reinforced concrete.” Constr. Build. Mater. 152 (Oct): 529–538. https://doi.org/10.1016/j.conbuildmat.2017.07.028.
Haynes, W. M. 2015. CRC handbook of chemistry and physics. Edited by D. R. Lite and T. J. Bruno. Boca Raton, FL: CRC Press.
Lau, A., and M. Anson. 2006. “Effect of high temperatures on high performance steel fibre reinforced concrete.” Cem. Concr. Res. 36 (9): 1698–1707. https://doi.org/10.1016/j.cemconres.2006.03.024.
Ng, T. S., and T. N. S. Htut. 2017. “Structural application of steel fibres reinforced concrete with and without conventional reinforcement.” In Proc., Australian Structural Engineering Conf.: ASEC 2018. Reston, VA: ASCE.
Phan, L. T. 2008. “Pore pressure and explosive spalling in concrete.” Mater. Struct. 41 (10): 1623–1632. https://doi.org/10.1617/s11527-008-9353-2.
Rambo, D. A. S., A. de Blanco, A. D. Figueiredo, E. R. F. dos Santos, R. D. Toledo, and O. F. M. da Gomes. 2018. “Study of temperature effect on macro-synthetic fiber reinforced concretes by means of Barcelona tests: An approach focused on tunnels assessment.” Constr. Build. Mater. 158 (Jan): 443–453. https://doi.org/10.1016/j.conbuildmat.2017.10.046.
Rodriguez, E. T., K. Garbev, D. Merz, L. Black, and I. G. Richardson. 2017. “Thermal stability of C-S-H phases and applicability of Richardson and Groves’ and Richardson C-(A)-S-H(I) models to synthetic C-S-H.” Cem. Concr. Res. 93 (Mar): 45–56. https://doi.org/10.1016/j.cemconres.2016.12.005.
Ruano, G., F. Isla, B. Luccioni, R. Zerbino, and G. Giaccio. 2018. “Steel fibers pull-out after exposure to high temperatures and its contribution to the residual mechanical behavior of high strength concrete.” Constr. Build. Mater. 163 (Feb): 571–585. https://doi.org/10.1016/j.conbuildmat.2017.12.129.
Salvador, R. P., S. H. P. Cavalaro, I. Segura, A. D. Figueiredo, and J. Pérez. 2016. “Early age hydration of cement pastes with alkaline and alkali-free accelerators for sprayed concrete.” Constr. Build. Mater. 111 (May): 386–398. https://doi.org/10.1016/j.conbuildmat.2016.02.101.
Scrivener, K., R. Snellings, and B. Lothenbach. 2017. “A practical guide to microstructural analysis of cementitious materials.” In A practical guide to microstructural analysis of cementitious materials. Boca Raton, FL: CRC Press.
Serafini, R., R. R. Agra, L. A. G. Bitencourt, and A. de la Fuente, and A. D. de Figueiredo. 2021. “Bond-slip response of steel fibers after exposure to elevated temperatures: Experimental program and design-oriented constitutive equation.” Compos. Struct. 255: 112916. https://doi.org/10.1016/j.compstruct.2020.112916.
Serafini, R., S. R. A. Dantas, R. P. Salvador, R. R. Agra, D. A. S. Rambo, A. F. Berto, and A. D. de Figueiredo. 2019. “Influence of fire on temperature gradient and physical-mechanical properties of macro-synthetic fiber reinforced concrete for tunnel linings.” Constr. Build. Mater. 214 (Jul): 254–268. https://doi.org/10.1016/j.conbuildmat.2019.04.133.
Serafini, R., L. M. Mendes, R. P. Salvador, and A. D. de Figueiredo. 2020. “The effect of elevated temperatures on the properties of cold-drawn steel fibers.” Mag. Concr. Res. 1–28. https://doi.org/10.1680/jmacr.19.00498.
Skoblinskaya, N. N., and K. G. Krasilnikov. 1975. “Changes in crystal structure of ettringite on dehydration. 1.” Cem. Concr. Res. 5 (4): 381–393. https://doi.org/10.1016/0008-8846(75)90093-9.
Skoblinskaya, N. N., K. G. Krasilnikov, L. V. Nikitina, and V. P. Varlamov. 1975. “Changes in crystal structure of ettringite on dehydration. 2.” Cem. Concr. Res. 5 (5): 419–431. https://doi.org/10.1016/0008-8846(75)90017-4.
Soranakom, C., and B. Mobasher. 2008. “Correlation of tensile and flexural responses of strain softening and strain hardening cement composites.” Cem. Concr. Compos. 30 (6): 465–477. https://doi.org/10.1016/j.cemconcomp.2008.01.007.
Suhaendi, S. L., and T. Horiguchi. 2006. “Effect of short fibers on residual permeability and mechanical properties of hybrid fibre reinforced high strength concrete after heat exposition.” Cem. Concr. Res. 36 (9): 1672–1678. https://doi.org/10.1016/j.cemconres.2006.05.006.
Taylor, H. F. W. 1997. Cement chemistry. 2nd ed. London: Thomas Telford.
Varona, F. B., F. J. Baeza, D. Bru, and S. Ivorra. 2018. “Influence of high temperature on the mechanical properties of hybrid fibre reinforced normal and high strength concrete.” Constr. Build. Mater. 159 (Jan): 73–82. https://doi.org/10.1016/j.conbuildmat.2017.10.129.
Vydra, V., F. Vodák, O. Kapičková, and Š. Hošková. 2001. “Effect of temperature on porosity of concrete for nuclear-safety structures.” Cem. Concr. Res. 31 (7): 1023–1026. https://doi.org/10.1016/S0008-8846(01)00516-6.
Yu, P., and R. J. Kirkpatrick. 2012. “Thermal dehydration of tobermorite and jennite.” Concr. Sci. Eng. 97 (325): 117–119.
Zheng, W., H. Li, and Y. Wang. 2012. “Compressive stress–strain relationship of steel fiber-reinforced reactive powder concrete after exposure to elevated temperatures.” Constr. Build. Mater. 35 (Oct): 931–940. https://doi.org/10.1016/j.conbuildmat.2012.05.031.
Zhou, Q., and F. P. Glasser. 2001. “Thermal stability and decomposition mechanisms of ettringite at <120°C.” Cem. Concr. Res. 31 (9): 1333–1339. https://doi.org/10.1016/S0008-8846(01)00558-0.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Jul 20, 2020
Accepted: Oct 6, 2020
Published online: Feb 24, 2021
Published in print: May 1, 2021
Discussion open until: Jul 24, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.