Development of Sustainable Masonry Bricks Using Biological By-Products and Wastes
Publication: Journal of Materials in Civil Engineering
Volume 33, Issue 5
Abstract
Minimizing the use of nonreplaceable natural resources and relying on renewable materials that generate less waste is a key step in converting masonry manufacturing to a sustainable industry. This research aimed at developing innovative masonry bricks for inexpensive masonry construction, which will lessen the carbon dioxide footprint and firing energy levels during the manufacturing process of bricks without compromising the prescribed mechanical and physical properties of the masonry units. Results are presented from a pilot experimental study on the incorporation of biologically inert by-products of sludge treatment (high-biopolymer sludge and incinerated sewage sludge ash) and waste glass, used as alternatives to natural shale in the manufacturing of low-cost and environmentally friendly masonry bricks. Through characterization tests, it was shown that the developed hybrid bricks containing waste materials satisfy all the quality control criteria set by the masonry industry in terms of a variety of mechanical and physical properties. By using wastes as raw materials to reduce the amounts of nonrecoverable natural resources in brick production, a potentially sustainable solution is developed for masonry construction. Hybrid brick manufacturing also helps to lower the carbon footprint and firing energy and offers an alternative to landfill disposal of the wastes.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request (experimental and analytical results).
Acknowledgments
Research was conducted in the High-Bay Laboratory of York University, Canada. Shale was generously donated by Brampton Brick. The work was funded through a Lassonde Innovation Fund.
References
Akinshipe, O., and G. Kornelius. 2017. “Chemical and thermodynamic processes in clay brick firing techno and associated atmospheric emissions metrics-review.” J. Pollut. Effects Control 5 (2). https://doi.org/10.4172/2375-4397.1000190.
ASTM. 2008. Standard test method for laboratory determination of pulse velocities and ultrasonic elastic constants of rock. West Conshohocken, PA: ASTM.
ASTM. 2014. Standard test method for fundamental transverse, longitudinal, and torsional resonant frequencies of concrete specimens. West Conshohocken, PA: ASTM.
ASTM. 2016. Standard test method for pulse velocity through concrete. West Conshohocken, PA: ASTM.
ASTM. 2019. Standard test method for splitting tensile strength of masonry units. West Conshohocken, PA: ASTM.
ASTM. 2020. Standard test methods for sampling and testing brick and structural clay tile. West Conshohocken, PA: ASTM.
Brito, J., and F. Agrela. 2018. New trends in eco-efficient and recycled concrete. Cambridge, UK: Woodhead.
Brozovsky, J. 2017. “Ultrasonic pulse and resonance method—Evaluation of the degree of damage to the internal structure of repair mortars caused by exposure to high temperatures.” Russ. J. Non-Destr. Test. 53 (10): 744–753. https://doi.org/10.1134/S1061830917100047.
Campbell, J., and W. Pryce. 2003. Brick: A world history. New York: Thames and Hudson.
Chidiac, S. E., and L. M. Federico. 2007. “Effects of waste glass additions on the properties and durability of fired clay brick.” Can. J. Civ. Eng. 34 (11): 1458–1466. https://doi.org/10.1139/L07-120.
CSA (Canadian Standard Association). 2018. Fired masonry brick made from clay or shale. Rexdale, ON, Canada: CSA.
Demir, I. 2009. “Reuse of waste glass in building brick production.” Waste Manage. Res. 27 (6): 572–577. https://doi.org/10.1177/0734242X08096528.
Denison, J., and C. Halligan. 2015. Building materials and the environment. London: Stephen George & Partners.
Dondi, M., G. Guarini, M. Raimondo, and C. Zanelli. 2009. “Recycling PC and TV waste glass in clay bricks and roof tiles.” Waste Manage. 29 (6): 1945–1951. https://doi.org/10.1016/j.wasman.2008.12.003.
Dyer, T. D., and R. K. Dhir. 2001. “Chemical reactions of glass cullet used as cement component.” J. Mater. Civ. Eng. 13 (6): 412–417. https://doi.org/10.1061/(ASCE)0899-1561(2001)13:6(412).
Fergala, A., A. AlSayed, S. Khattab, M. Ramirez, and A. Eldyasti. 2018. “Development of methane-utilizing mixed cultures for the production of polyhydroxyalkanoates (PHAs) from anaerobic digester sludge.” Environ. Sci. Technol. 52 (21): 12376–12377. https://doi.org/10.1021/acs.est.8b04142.
Fernandes, F. M., P. B. Lourenço, and F. Castro. 2010. “Ancient clay bricks: Manufacture and properties.” In Materials, technologies and practice in historic heritage structures, 29–48. New York: Springer.
Kadir, A. A., and A. Mohajerani. 2011. “Brick: An excellent building material for recycling wastes—A review.” In Proc., IASTED Int. Conf., 4–6. Calgary, AB: International Association of Science and Technology for Development.
Kazmi, S. M. S., S. Abbas, M. L. Nehdi, M. A. Saleem, and M. J. Munir. 2017. “Feasibility of using waste glass sludge in production of ecofriendly clay bricks.” J. Mater. Civ. Eng. 29 (8): 04017056. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001928.
Kizhakkethundathil-Tomy, T. 2019. “Development of sustainable masonry bricks.” M.Sc. thesis, Lassonde School of Engineering, York Univ.
Koroth, S. R., P. Fazio, and D. Feldman. 1998. “Evaluation of clay brick durability using ultrasonic pulse velocity.” J. Archit. Eng. 4 (Dec): 142–147. https://doi.org/10.1061/(ASCE)1076-0431(1998)4:4(142).
Lee, J., H. Yoo, S. Park, S. Cho, and Y. Seo. 2016. “Recycling of cathode ray tube panel glasses as aggregates of concrete blocks and clay bricks.” J. Mater. Cycles Waste Manage. 18 (3): 552–562. https://doi.org/10.1007/s10163-015-0350-6.
Lee, M., R. Legg, S. Maxwell, and W. Rees. 2013. Reducing greenhouse gas emissions and creating green jobs through zero waste in BC. Vancouver, BC, Canada: Wilderness Committee.
Lin, D. F., and C. H. Weng. 2001. “Use of sewage sludge ash as brick material.” J. Environ. Eng. 127 (10): 922–927. https://doi.org/10.1061/(ASCE)0733-9372(2001)127:10(922).
Lin, K., L. Huang, J. Shie, C. Cheng, C. Lee, and T. Chang. 2012. “Elucidating the effects of solar panel waste glass substitution on the physical and mechanical characteristics of clay bricks.” Environ. Technol. 34 (1): 1–10. https://doi.org/10.1080/09593330.2012.679693.
MSJC (Masonry Standards Joint Committee). 2013. Building code requirements and specification for masonry structures. Farmington Hills, MI: MSJC.
Okuno, N., and S. Takahashi. 1997. “Full scale application of manufacturing bricks from sewage.” Water Sci. Technol. 36 (11): 243–250. https://doi.org/10.2166/wst.1997.0417.
Owusu, P. A., and S. Asumadu-Sarkodie. 2016. “A review of renewable energy sources, sustainability issues and climate change mitigation.” Cogent Eng. 3 (1): 1167990. https://doi.org/10.1080/23311916.2016.1167990.
Samadikun, B. P., S. Rukayah, I. B. Priyambada, S. T. R. Lumbantobing, and M. A. Budihardjo. 2018. “Potential utilization of SSA from water treatment plant as brick material.” In Vol. 73 of Proc., E3S Web of Conf. Les Ulis, France: EDP Sciences. https://doi.org/10.1051/e3sconf/20187305001.
Smith, A. S. 2004. “Recycled glass as a brick fluxing agent.” In Proc., Int. Conf. on Sustainable Waste Management and Recycling: Glass Waste, 149–165. London: Institution of Civil Engineers.
Świerczek, L., B. M. Cieślik, and P. Konieczka. 2018. “The potential of raw sewage sludge in construction industry—A review.” J. Cleaner Prod. 200 (Nov): 342–356. https://doi.org/10.1016/j.jclepro.2018.07.188.
Tantawy, M. A., A. M. El-Roudi, E. M. Abdalla, and M. Abdelzaher. 2012. “Evaluation of the pozzolanic activity of sewage sludge ash.” Int. Scholarly Res. Not. 2012: 487037. https://doi.org/10.5402/2012/487037.
Tastani, S., and B. Diamantis. 2008. “Addition on dried sewage sludge in clay tiles: Experimental investigation of the physical and mechanical properties.” In Proc., 1st Hellenic Conf. of Structure Materials and Elements. Athens, Greece: Technical Chamber of Greece.
Taurino, R., E. Karamanova, L. Barbieri, S. Atanasova-Vladimirova, F. Andreola, and A. Karamanov. 2017. “New fired bricks based on municipal solid waste incinerator bottom ash.” Waste Manage. Res. 35 (10): 1055–1063. https://doi.org/10.1177/0734242X17721343.
Timoshenko, S., and J. N. Goodier. 1951. Theory of elasticity. New York: McGraw-Hill.
Ukwatta, A., and A. Mohajerani. 2017a. “Characterisation of fired-clay bricks incorporating biosolids and the effect of heating rate on properties of bricks.” Constr. Build. Mater. 142 (Jul): 11–22. https://doi.org/10.1016/j.conbuildmat.2017.03.047.
Ukwatta, A., and A. Mohajerani. 2017b. “Effect of organic content in biosolids on the properties of fired-clay bricks incorporated with biosolids.” J. Mater. Civ. Eng. 29 (7): 04017047. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001865.
Ukwatta, A., A. Mohajerani, N. Eshtiaghi, and S. Setunge. 2016. “Variation in physical and mechanical properties of fired-clay bricks incorporating ETP biosolids.” J. Cleaner Prod. 119 (Apr): 76–85. https://doi.org/10.1016/j.jclepro.2016.01.094.
Weiss, M., J. Haufe, M. Carus, M. Brandão, S. Bringezu, B. Hermann, and M. K. Patel. 2012. “A review of the environmental impacts of biobased materials.” J. Ind. Ecol. 16 (1): 169–181. https://doi.org/10.1111/j.1530-9290.2012.00468.x.
Wiebusch, B., and C. F. Seyfried. 1997. “Utilization of SSA in the brick and tile industry.” Water Sci. Technol. 36 (11): 251–258. https://doi.org/10.2166/wst.1997.0418.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 33 • Issue 5 • May 2021
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Mar 18, 2020
Accepted: Sep 4, 2020
Published online: Feb 18, 2021
Published in print: May 1, 2021
Discussion open until: Jul 18, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.