Sustainable Binders Stabilizing Dispersive Clay
Publication: Journal of Materials in Civil Engineering
Volume 33, Issue 3
Abstract
Dispersive clays are characterized by deflocculation in the presence of relatively pure and still water, which can lead to erosion, piping, and other earth instability problems. These can be addressed by stabilization with calcium-based materials (e.g., lime), which are nonetheless environmentally harmful, sometimes inefficient, and cannot guarantee the requested performance. Thus, this technical note intends to examine the performance of a dispersive clay amended with two residues: grounded glass powder (from glass waste recipients), and carbide lime (a by-product of the acetylene gas production). The present study is innovative in that it considers the stabilization of a dispersive soil using these sustainable binders. More specifically, it assesses the effect of the following controllable factors in the strength, stiffness, and more importantly durability of compacted dispersive clay-binder blends: ground glass and lime contents, dry unit weight, curing temperature, and molding moisture content. The statistical analysis of the results has shown that curing temperature was the most influential factor regarding strength and stiffness responses, followed by dry unit weight. Regarding the durability results, the dry unit weight and the amount of carbide lime were the most impacting variables. Likewise, such results could be successfully correlated to the adjusted porosity/lime index, thus yielding a series of equations to predict the blends behavior with great coefficients of determination ().
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data from laboratory tests (unconfined compressive strength, maximum shear modulus, and accumulated loss of mass), and the fitting procedure model used during the study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors wish to explicit their appreciation to FAPERGS/CNPq 12/2014–PRONEX (Grant No. 16/2551-0000469-2), MCT-CNPq (INCT, Universal and Produtividade em Pesquisa), and MEC-CAPES (PROEX) for the support to the research group.
References
ABNT (Associação Brasileira de Normas Técnicas). 1998. Dispersive clay soils: Identification and classification by means of the Pinhole Test. [In Portuguese.]. Rio de Janeiro, Brazil: ABNT.
Al-Mukhtar, M., A. Lasledj, and J. F. Alcover. 2010. “Behaviour and mineralogy changes in lime-treated expansive soil at .” Appl. Clay Sci. 50 (2): 199–203. https://doi.org/10.1016/j.clay.2010.07.023.
ASTM. 2007. Standard test method for pore water extraction and determination of the soluble salt content of soils by refractometer. West Conshohocken, PA: ASTM.
ASTM. 2008. Standard test method for laboratory determination of pulse velocities and ultrasonic elastic constants of rock. West Conshohocken, PA: ASTM.
ASTM. 2012. Test methods for laboratory compaction characteristics of soil using standard effort (). West Conshohocken, PA: ASTM.
ASTM. 2013a. Standard test methods for determining dispersive characteristics of clayey soils by the crumb test. West Conshohocken, PA: ASTM.
ASTM. 2013b. Standard test methods for identification and classification of dispersive clay soils by the pinhole test. West Conshohocken, PA: ASTM.
ASTM. 2015. Standard test method for wetting and drying compacted soil-cement mixtures. West Conshohocken, PA: ASTM.
ASTM. 2017. Standard practice for classification of soils for engineering purposes (unified soil classification system). West Conshohocken, PA: ASTM.
ASTM. 2018. Standard test method for compressive strength of cylindrical concrete specimens. West Conshohocken, PA: ASTM.
Basu, D., and A. Puppala. 2015. “Principles of sustainability and their applications in geotechnical engineering.” In Proc., Geotechnical Synergy: Buenos Aires, 162–183. Amsterdam, Netherlands: IOS Press.
Bicca Neto, V. 2015. Commitment business for recycling: Review. [In Portuguese.]. Brasilia, Brazil: CEMPRE.
Carpenter, A., and S. Cramer. 1999. “Mitigation of alkali-silica reaction in pavement patch concrete that incorporates highly reactive fine aggregate.” J. Transp. Res. Board 1668 (1): 60–67. https://doi.org/10.3141/1668-09.
Consoli, N. C., M. S. Carretta, L. Festugato, H. B. Leon, L. F. Tomasi, and K. S. Heineck. 2020. “Ground waste glass-carbide lime as a sustainable binder stabilizing three different silica sands.” Géotechnique 2020 (May): 1–14. https://doi.org/10.1680/jgeot.18.P.099.
Consoli, N. C., M. S. Carretta, H. B. Leon, L. F. Tomasi, and H. C. Scheuermann Filho. 2019. “Strength and stiffness of ground waste glass-carbide lime blends.” J. Mater. Civ. Eng. 31 (10): 06019010. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002862.
Consoli, N. C., A. Dalla Rosa, and R. B. Saldanha. 2011. “Variables governing strength of compacted soil-fly ash-lime mixtures.” J. Mater. Civ. Eng. 23 (4): 432–440. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000186.
Consoli, N. C., D. Foppa, L. Festugato, and K. S. Heineck. 2007. “Key parameters for strength control of artificially cemented soils.” J. Geotech. Geoenviron. Eng. 133 (2): 197–205. https://doi.org/10.1061/(ASCE)1090-0241(2007)133:2(197).
Consoli, N. C., L. S. Lopes, D. Foppa, and K. S. Heineck. 2009a. “Key parameters dictating strength of lime/cement-treated soils.” Geotech. Eng. 162 (2): 111–118. https://doi.org/10.1680/geng.2009.162.2.111.
Consoli, N. C., L. S. Lopes, D. Foppa, and K. S. Heineck. 2009b. “Key parameters for the strength lime stabilized soils.” J. Mater. Civ. Eng. 21 (5): 210–216. https://doi.org/10.1061/(ASCE)0899-1561(2009)21:5(210).
Consoli, N. C., S. F. V. Marques, M. F. Floss, and L. Festugato. 2017. “Broad-spectrum empirical correlation determining tensile and compressive strength of cement-bonded clean granular soils.” J. Mater. Civ. Eng. 29 (6): 06017004. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001858.
Consoli, N. C., R. A. Q. Samaniego, and N. M. K. Villalba. 2016. “Durability strength and stiffness of dispersive clay-lime blends.” J. Mater. Civ. Eng. 28 (11): 04016124. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001632.
Consoli, N. C., D. Winter, H. B. Leon, and H. C. Scheuermann Filho. 2018. “Durability, strength and stiffness of green stabilized sand.” J. Geotech. Geoenviron. Eng. 144 (9): 04018057. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001928.
Cooperative Research Center for Sustainable Sugar Production. 2001. Diagnosis and management of sodic soils under sugarcane. Townsville, Australia: Cooperative Research Center for Sustainable Sugar Production.
Dash, S. K., and M. Hussain. 2012. “Lime stabilization of soils: Reappraisal.” J. Mater. Civ. Eng. 24 (6): 707–714. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000431.
Diamond, S., J. L. White, and W. L. Dolch. 1963. “Transformation of clay minerals by calcium hydroxide attack.” Clays Clay Miner. 12 (1): 359–379. https://doi.org/10.1346/CCMN.1963.0120134.
Elges, H. F. W. K. 1985. “Problems in South Africa—State of the art: Dispersive soils.” Civ. Eng. South Africa 27 (1): 347–353.
Gschösser, F., H. Wallbaum, and M. E. Boesch. 2012. “Life-cycle assessment of the production of Swiss road materials.” J. Mater. Civ. Eng. 24 (1): 168–176. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000375.
Hassan, N., W. H. Wan Hassan, A. S. A. Rashid, N. Latifi, N. Z. Mohd Yunus, S. Horpibulsuk, and H. Moayedi. 2019. “Microstructural characteristics of organic soils treated with biomass silica stabilizer.” Environ. Earth Sci. 78 (12): 367. https://doi.org/10.1007/s12665-019-8369-y.
Hou, D., Z. Li, and H. Ma. 2013. “Morphology of calcium silicate hydrate (C─ S─ H) gel: A molecular dynamic study.” Adv. Cem. Res. 10 (3): 1–12. https://doi.org/10.1680/adcr.13.00079.
Jiang, Y., T. C. Ling, K. H. Mo, and C. Shi. 2019. “A critical review of waste glass powder—Multiple roles of utilization in cement-based materials and construction products.” J. Environ. Manage. 242 (Jul): 440–449. https://doi.org/10.1016/j.jenvman.2019.04.098.
Khosravi, M., A. R. Tabarsa, A. Osouli, and N. Latifi. 2020. “A biopolymer-based waterproofing mortar for irrigation channel joints.” In Proc., Geo-Congress 2020: Biogeotechnics, 159–169. Reston, VA: ASCE.
Ladd, R. S. 1978. “Preparing test specimens using under-compaction.” Geotech. Test. J. 1 (1): 16–23. https://doi.org/10.1520/GTJ10364J.
Latifi, N., F. Vahedifard, E. Ghazanfari, and A. Rashid. 2018a. “Sustainable usage of calcium carbide residue for stabilization of clays.” J. Mater. Civ. Eng. 30 (6): 4018099. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002313.
Latifi, N., F. Vahedifard, S. Siddiqua, and S. Horpibulsuk. 2018b. “Solidification–stabilization of heavy metal–contaminated clays using gypsum: Multiscale assessment.” Int. J. Geomech. 18 (11): 4018150. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001283.
Metwally, I. M. 2007. “Investigations on the performance of concrete made with blended finely milled waste glass.” Adv. Cem. Res. 10 (1): 47–53. https://doi.org/10.1260/136943307780150823.
Mitchell, J., and K. Soga. 2005. Fundamentals of soil behavior. Hoboken, NJ: Wiley.
Mohajerani, A., J. Vajna, T. H. H. Cheung, H. Kurmus, A. Arulrajah, and S. Horpibulsuk. 2017. “Practical recycling applications of crushed waste glass in construction materials: A review.” Constr. Build. Mater. 156 (15): 443–467. https://doi.org/10.1016/j.conbuildmat.2017.09.005.
Mohanty, S., N. Roy, S. P. Singh, and P. Sihag. 2019. “Effect of industrial by-products on the strength of stabilized dispersive soil.” Int. J. Geotech. Eng. 2019 (Aug): 1–13. https://doi.org/10.1080/19386362.2019.1654281.
Montgomery, D. C. 2009. Design and analysis of experiments. Hoboken, NJ: Wiley.
Muhammad, N., S. Siddiqua, and N. Latifi. 2018. “Solidification of subgrade materials using magnesium alkalization: A sustainable additive for construction.” J. Mater. Civ. Eng. 30 (10): 4018260. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002484.
Pattengil, M., and T. C. Shutt. 1973. “Use of ground glass as a pozzolan.” In Proc., Int. Symp. on Utilization of Waste Glass in Secondary Products, 137–153. Albuquerque, NM: Univ. of New Mexico.
Pourabbas Bilondi, M., M. M. Toufigh, and V. Toufigh. 2018. “Using calcium carbide residue as an alkaline activator for glass powder–clay geopolymer.” Constr. Build. Mater. 183 (Sep): 417–428. https://doi.org/10.1016/j.conbuildmat.2018.06.190.
Puertas, F., M. Palacios, H. Manzano, J. S. Dolado, A. Rico, and J. Rodríguez. 2011. “A model for the C-A-S-H gel formed in alkali-activated slag cements.” J. Eur. Ceram. Soc. 31 (12): 2043–2056. https://doi.org/10.1016/j.jeurceramsoc.2011.04.036.
Saldanha, R. B., and N. C. Consoli. 2016. “Accelerated mix design of lime stabilized materials.” J. Mater. Civ. Eng. 28 (3): 6015012. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001437.
Saldanha, R. B., H. C. Scheuermann Filho, J. E. C. Mallmann, N. C. Consoli, and K. R. Reddy. 2018. “Physical-mineralogical-chemical characterization of carbide lime: An environment-friendly chemical additive for soil stabilization.” J. Mater. Civ. Eng. 30 (6): 06018004. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002283.
Sales, F. A. 2014. “Estudo da atividade pozolânica de micropartículas de vidro soda-cal, incolor e âmbar e sua influência no desempenho de compostos de cimento Portland.” [In Portuguese.] Ph.D. thesis. Dept. of Civil Engineering, Universidade Federal de Minas Gerais.
Santham, G. R., and K. Gopalakrishnan. 2013. “Pavement life cycle sustainability assessment and interpretation using a novel qualitative decision procedure.” J. Comput. Civ. Eng. 27 (5): 544–554. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000228.
Sato, A., S. Nishimoto, and T. Suzuki. 2006. “Relationship between curing temperature and strength of stabilized soil.” In Proc., 13th Int. Conf. on Cold Regions Engineering. Reston, VA: ASCE.
Sharma, A. K., and P. V. Sivapullaiah. 2016. “Ground granulated blast furnace slag amended fly ash as an expansive soil stabilizer.” Soils Found. 56 (2): 205–212. https://doi.org/10.1016/j.sandf.2016.02.004.
Sherard, J. L., L. P. Dunnigan, and R. S. Decker. 1976. “Identification and nature of dispersive soils.” J. Geotech. Eng. Div. 102 (GT4): 287–301.
USEPA. 2015. Advancing sustainable materials management 2013 fact sheet. Washington, DC: USEPA.
Zhang, T., J. Zou, B. Wang, Z. Wu, Y. Jia, and C. Cheeseman. 2018. “Characterization of magnesium silicate hydrate (MSH) gel formed by reacting MgO and silica fume.” Materials 11 (6): 909. https://doi.org/10.3390/ma11060909.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: May 9, 2020
Accepted: Aug 3, 2020
Published online: Dec 16, 2020
Published in print: Mar 1, 2021
Discussion open until: May 16, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.